net: phy: aquantia: add support for AQR114C PHY ID
Subsystems (3)
PATCH 1/1 net: phy: aquantia: add support for AQR114C PHY ID
Add support for AQR114C PHY ID. This PHY advertise 10G speed but supports only up to 5G speed.
--- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/net/phy/aquantia/aquantia_main.c +21 -0
@@ -28,6 +28,7 @@#define PHY_ID_AQR412 0x03a1b712#define PHY_ID_AQR113 0x31c31c40#define PHY_ID_AQR113C 0x31c31c12 +#define PHY_ID_AQR114C 0x31c31c22#define PHY_ID_AQR813 0x31c31cb2#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
@@ -962,6 +963,25 @@ static struct phy_driver aqr_driver[] = { .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, }, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR114C), + .name = "Aquantia AQR114C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr111_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, +}, {PHY_ID_MATCH_MODEL (PHY_ID_AQR813 ), .name = "Aquantia AQR813",
@@ -999,6 +1019,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { } };
Signature · 1 line
2.44.0
Andrew Lunn
maintainerQuoted 2 lines · Paweł Owoc
Add support for AQR114C PHY ID. This PHY advertise 10G speed but supports only up to 5G speed.
net-next is closed at the moment. Please repost when it opens.
Additionally, please could you extend the commit message to explain how this patch actually deals with it advertising 10G when it should not.
Andrew
PATCH v2 1/1 net: phy: aquantia: add support for AQR114C PHY ID
In reply to Paweł OwocAdd support for AQR114C PHY ID. This PHY advertise 10G speed:
SPEED(0x04): 0x6031
capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10
+100 +1000 -10-ts -2-tl +10g
EXTABLE(0x0B): 0x40fc
capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx
+100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g
+2.5g/5g -1000-hbut supports only up to 5G speed (as with AQR111/111B0). AQR111 init config is used to set max speed 5G.
--- drivers/net/phy/aquantia/aquantia_main.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+)
drivers/net/phy/aquantia/aquantia_main.c +21 -0
@@ -28,6 +28,7 @@#define PHY_ID_AQR412 0x03a1b712#define PHY_ID_AQR113 0x31c31c40#define PHY_ID_AQR113C 0x31c31c12 +#define PHY_ID_AQR114C 0x31c31c22#define PHY_ID_AQR813 0x31c31cb2#define MDIO_PHYXS_VEND_IF_STATUS 0xe812
@@ -962,6 +963,25 @@ static struct phy_driver aqr_driver[] = { .get_stats = aqr107_get_stats, .link_change_notify = aqr107_link_change_notify, }, +{ + PHY_ID_MATCH_MODEL(PHY_ID_AQR114C), + .name = "Aquantia AQR114C", + .probe = aqr107_probe, + .get_rate_matching = aqr107_get_rate_matching, + .config_init = aqr111_config_init, + .config_aneg = aqr_config_aneg, + .config_intr = aqr_config_intr, + .handle_interrupt = aqr_handle_interrupt, + .read_status = aqr107_read_status, + .get_tunable = aqr107_get_tunable, + .set_tunable = aqr107_set_tunable, + .suspend = aqr107_suspend, + .resume = aqr107_resume, + .get_sset_count = aqr107_get_sset_count, + .get_strings = aqr107_get_strings, + .get_stats = aqr107_get_stats, + .link_change_notify = aqr107_link_change_notify, +}, {PHY_ID_MATCH_MODEL (PHY_ID_AQR813 ), .name = "Aquantia AQR813",
@@ -999,6 +1019,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = { { PHY_ID_MATCH_MODEL(PHY_ID_AQR412) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR113C) }, + { PHY_ID_MATCH_MODEL(PHY_ID_AQR114C) }, { PHY_ID_MATCH_MODEL(PHY_ID_AQR813) }, { } };
Signature · 1 line
2.44.0
Quoted 9 lines · Paweł Owoc
Add support for AQR114C PHY ID. This PHY advertise 10G speed:
SPEED(0x04):0x6031
capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10+100 +1000 -10-ts -2-tl +10g EXTABLE(0x0B): 0x40fc capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g +2.5g/5g -1000-h
Quoted 4 lines
but supports only up to 5G speed (as with AQR111/111B0). AQR111 init config is used to set max speed 5G.
Signed-off-by Paweł Owoc <[email protected]>
Andrew
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Mon, 1 Apr 2024 16:51:06 +0200 you wrote:
Add support for AQR114C PHY ID. This PHY advertise 10G speed:
SPEED(0x04):0x6031
capabilities: -400g +5g +2.5g -200g -25g -10g-xr -100g -40g -10g/1g -10+100 +1000 -10-ts -2-tl +10g EXTABLE(0x0B): 0x40fc capabilities: -10g-cx4 -10g-lrm +10g-t +10g-kx4 +10g-kr +1000-t +1000-kx +100-tx -10-t -p2mp -40g/100g -1000/100-t1 -25g -200g/400g +2.5g/5g -1000-h[...]
Here is the summary with links:
- [net-next,v2] net: phy: aquantia: add support for AQR114C PHY ID
https://git.kernel.org/netdev/net-next/c/c278ec644377
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html