Skip to contentSkip to conversation

tcp: add support for SO_PEEK_OFF socket option

PATCH Applied [email protected] 3 participants 3 messages Apr 9, 2024 – Apr 12, 2024

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v4 1/1 tcp: add support for SO_PEEK_OFF socket option

From: Jon Maloy <[email protected]>

When reading received messages from a socket with MSG_PEEK, we may want to read the contents with an offset, like we can do with pread/preadv() when reading files. Currently, it is not possible to do that.

In this commit, we add support for the SO_PEEK_OFF socket option for TCP, in a similar way it is done for Unix Domain sockets.

In the iperf3 log examples shown below, we can observe a throughput improvement of 15-20 % in the direction host->namespace when using the protocol splicer 'pasta' (https://passt.top).
This is a consistent result.

pasta(1) and passt(1) implement user-mode networking for network namespaces (containers) and virtual machines by means of a translation layer between Layer-2 network interface and native Layer-4 sockets (TCP, UDP, ICMP/ICMPv6 echo).

Received, pending TCP data to the container/guest is kept in kernel buffers until acknowledged, so the tool routinely needs to fetch new data from socket, skipping data that was already sent.

At the moment this is implemented using a dummy buffer passed to recvmsg(). With this change, we don't need a dummy buffer and the related buffer copy (copy_to_user()) anymore.

passt and pasta are supported in KubeVirt and libvirt/qemu.

jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f
SO_PEEK_OFF not supported by kernel.
jmaloy@freyr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 44822
[  5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 44832
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.02 GBytes  8.78 Gbits/sec
[  5]   1.00-2.00   sec  1.06 GBytes  9.08 Gbits/sec
[  5]   2.00-3.00   sec  1.07 GBytes  9.15 Gbits/sec
[  5]   3.00-4.00   sec  1.10 GBytes  9.46 Gbits/sec
[  5]   4.00-5.00   sec  1.03 GBytes  8.85 Gbits/sec
[  5]   5.00-6.00   sec  1.10 GBytes  9.44 Gbits/sec
[  5]   6.00-7.00   sec  1.11 GBytes  9.56 Gbits/sec
[  5]   7.00-8.00   sec  1.07 GBytes  9.20 Gbits/sec
[  5]   8.00-9.00   sec   667 MBytes  5.59 Gbits/sec
[  5]   9.00-10.00  sec  1.03 GBytes  8.83 Gbits/sec
[  5]  10.00-10.04  sec  30.1 MBytes  6.36 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  10.3 GBytes  8.78 Gbits/sec   receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
jmaloy@freyr:~/passt#
logout
[ perf record: Woken up 23 times to write data ]
[ perf record: Captured and wrote 5.696 MB perf.data (35580 samples) ]
jmaloy@freyr:~/passt$
jmaloy@freyr:~/passt$ perf record -g ./pasta --config-net -f
SO_PEEK_OFF supported by kernel.
jmaloy@freyr:~/passt# iperf3 -s
-----------------------------------------------------------
Server listening on 5201 (test #1)
-----------------------------------------------------------
Accepted connection from 192.168.122.1, port 52084
[  5] local 192.168.122.180 port 5201 connected to 192.168.122.1 port 52098
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-1.00   sec  1.32 GBytes  11.3 Gbits/sec
[  5]   1.00-2.00   sec  1.19 GBytes  10.2 Gbits/sec
[  5]   2.00-3.00   sec  1.26 GBytes  10.8 Gbits/sec
[  5]   3.00-4.00   sec  1.36 GBytes  11.7 Gbits/sec
[  5]   4.00-5.00   sec  1.33 GBytes  11.4 Gbits/sec
[  5]   5.00-6.00   sec  1.21 GBytes  10.4 Gbits/sec
[  5]   6.00-7.00   sec  1.31 GBytes  11.2 Gbits/sec
[  5]   7.00-8.00   sec  1.25 GBytes  10.7 Gbits/sec
[  5]   8.00-9.00   sec  1.33 GBytes  11.5 Gbits/sec
[  5]   9.00-10.00  sec  1.24 GBytes  10.7 Gbits/sec
[  5]  10.00-10.04  sec  56.0 MBytes  12.1 Gbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval           Transfer     Bitrate
[  5]   0.00-10.04  sec  12.9 GBytes  11.0 Gbits/sec  receiver
-----------------------------------------------------------
Server listening on 5201 (test #2)
-----------------------------------------------------------
^Ciperf3: interrupt - the server has terminated
logout
[ perf record: Woken up 20 times to write data ]
[ perf record: Captured and wrote 5.040 MB perf.data (33411 samples) ]
jmaloy@freyr:~/passt$

The perf record confirms this result. Below, we can observe that the CPU spends significantly less time in the function ____sys_recvmsg() when we have offset support.

Without offset support:
----------------------

jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \
                       -p ____sys_recvmsg -x --stdio -i  perf.data | head -1
46.32%     0.00%  passt.avx2  [kernel.vmlinux]  [k] do_syscall_64  ____sys_recvmsg

With offset support:
----------------------

jmaloy@freyr:~/passt$ perf report -q --symbol-filter=do_syscall_64 \
                       -p ____sys_recvmsg -x --stdio -i  perf.data | head -1
28.12%     0.00%  passt.avx2  [kernel.vmlinux]  [k] do_syscall_64  ____sys_recvmsg

---
v3: - Applied changes suggested by Stefano Brivio and Paolo Abeni
v4: - Same as v3. Posting was delayed because I first had to debug
an issue that turned out to not be directly related to this change.

---
 net/ipv4/af_inet.c |  1 +
 net/ipv4/tcp.c     | 16 ++++++++++------
 2 files changed, 11 insertions(+), 6 deletions(-)
net/ipv4/af_inet.c +1 -0
index 55bd72997b31..a7cfeda28bb2 100644
@@ -1072,6 +1072,7 @@ const struct proto_ops inet_stream_ops = {
 #endif
 	.splice_eof	   = inet_splice_eof,
 	.splice_read	   = tcp_splice_read,
+	.set_peek_off      = sk_set_peek_off,
 	.read_sock	   = tcp_read_sock,
 	.read_skb	   = tcp_read_skb,
 	.sendmsg_locked    = tcp_sendmsg_locked,
net/ipv4/tcp.c +10 -6
index 92ee60492314..c0d6fd576d32 100644
@@ -1416,8 +1416,6 @@ static int tcp_peek_sndq(struct sock *sk, struct msghdr *msg, int len)
 	struct sk_buff *skb;
 	int copied = 0, err = 0;
 
-	/* XXX -- need to support SO_PEEK_OFF */
-
 	skb_rbtree_walk(skb, &sk->tcp_rtx_queue) {
 		err = skb_copy_datagram_msg(skb, 0, msg, skb->len);
 		if (err)
@@ -2328,6 +2326,7 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
 	int target;		/* Read at least this many bytes */
 	long timeo;
 	struct sk_buff *skb, *last;
+	u32 peek_offset = 0;
 	u32 urg_hole = 0;
 
 	err = -ENOTCONN;
@@ -2361,7 +2360,8 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
 
 	seq = &tp->copied_seq;
 	if (flags & MSG_PEEK) {
-		peek_seq = tp->copied_seq;
+		peek_offset = max(sk_peek_offset(sk, flags), 0);
+		peek_seq = tp->copied_seq + peek_offset;
 		seq = &peek_seq;
 	}
 
@@ -2464,11 +2464,11 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
 		}
 
 		if ((flags & MSG_PEEK) &&
-		    (peek_seq - copied - urg_hole != tp->copied_seq)) {
+		    (peek_seq - peek_offset - copied - urg_hole != tp->copied_seq)) {
 			net_dbg_ratelimited("TCP(%s:%d): Application bug, race in MSG_PEEK\n",
 					    current->comm,
 					    task_pid_nr(current));
-			peek_seq = tp->copied_seq;
+			peek_seq = tp->copied_seq + peek_offset;
 		}
 		continue;
 
@@ -2509,7 +2509,10 @@ static int tcp_recvmsg_locked(struct sock *sk, struct msghdr *msg, size_t len,
 		WRITE_ONCE(*seq, *seq + used);
 		copied += used;
 		len -= used;
-
+		if (flags & MSG_PEEK)
+			sk_peek_offset_fwd(sk, used);
+		else
+			sk_peek_offset_bwd(sk, used);
 		tcp_rcv_space_adjust(sk);
 
 skip_copy:
@@ -3010,6 +3013,7 @@ int tcp_disconnect(struct sock *sk, int flags)
 	__skb_queue_purge(&sk->sk_receive_queue);
 	WRITE_ONCE(tp->copied_seq, tp->rcv_nxt);
 	WRITE_ONCE(tp->urg_data, 0);
+	sk_set_peek_off(sk, -1);
 	tcp_write_queue_purge(sk);
 	tcp_fastopen_active_disable_ofo_check(sk);
 	skb_rbtree_purge(&tp->out_of_order_queue);
Signature · 1 line
2.42.0
Reviewed-by on v4 1/1
#1 lore raw
Quoted 20 lines · On Tue, Apr 9, 2024 at 5:28 PM <[email protected]> wrote:

From: Jon Maloy <[email protected]>

When reading received messages from a socket with MSG_PEEK, we may want to read the contents with an offset, like we can do with pread/preadv() when reading files. Currently, it is not possible to do that.

In this commit, we add support for the SO_PEEK_OFF socket option for TCP, in a similar way it is done for Unix Domain sockets.

In the iperf3 log examples shown below, we can observe a throughput improvement of 15-20 % in the direction host->namespace when using the protocol splicer 'pasta' (https://passt.top).
This is a consistent result.

pasta(1) and passt(1) implement user-mode networking for network namespaces (containers) and virtual machines by means of a translation layer between Layer-2 network interface and native Layer-4 sockets (TCP, UDP, ICMP/ICMPv6 echo).

Quoted 7 lines

Received, pending TCP data to the container/guest is kept in kernel buffers until acknowledged, so the tool routinely needs to fetch new data from socket, skipping data that was already sent.

#2 lore raw
In reply to [email protected]
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 10 lines · On Tue, 9 Apr 2024 11:28:05 -0400 you wrote:

From: Jon Maloy <[email protected]>

When reading received messages from a socket with MSG_PEEK, we may want to read the contents with an offset, like we can do with pread/preadv() when reading files. Currently, it is not possible to do that.

In this commit, we add support for the SO_PEEK_OFF socket option for TCP, in a similar way it is done for Unix Domain sockets.

[...]

Here is the summary with links:
- [net-next,v4] tcp: add support for SO_PEEK_OFF socket option

    https://git.kernel.org/netdev/net-next/c/05ea491641d3

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html