Skip to contentSkip to conversation

Qualcomm driver updates for v6.10

GIT PULL Applied Bjorn Andersson 2 participants 2 messages Apr 27, 2024 – Apr 29, 2024 Arm Qualcomm mailing list

lore
Share & tools
lore
#0 lore raw

The following changes since commit 4cece764965020c22cff7665b18a012006359095:

Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-drivers-for-6.10

for you to fetch changes up to 166db01007ea802ff9933ac73ec8f140ca0cf5d5:

soc: qcom: cmd-db: replace deprecated strncpy with strtomem (2024-04-21 12:26:47 -0500)

----------------------------------------------------------------
Qualcomm driver updates for v6.10

The Qualcomm SCM driver initialization order is improved, to avoid any potential for a client to find a half-initialized SCM instance. The handling of download mode bits is updated to not attempt QCOM_SCM_BOOT_SET_DLOAD_MODE if a io-address for the update is specified, and that path is changed to perform a read-modify-write to avoid updating unrelated bits. Error handling is corrected in the peripheral authentication service (PAS) functions, to release interconnect bandwidth votes in the case of an error. An unwanted error print on allocation error is also removed from this code path.

The QSEECOM allow list is marked __maybe_unused to avoid build warnings when built with !OF. The error handling related to the interconnect API is cleaned up to avoid handling the impossible IS_ERR() condition.

initcall level is bumped to "core" for cmd-db and rpmh-rsc, as dependent drivers like regulators, interconnects and clocks are registered at this level.

Another attempt is made to remove the strncpy() usage in cmd-db, this time with strtomem_pad() which has the correct characteristics.

The bwmon regmap cache is changed to maple tree.

After an attempt to add missing MODULE_DEVICE_TABLEs to debug drivers, the intention of not having them automatically load is documented.

Operations on the pmic_glink client list is put under mutual exclusion, to avoid races when clients are being registered. pmic_glink client registered after the firmware notification arrived was not informed that the firmware was up, this is resolved.

More DSPs and the apss subsystem is added to the Qualcomm sleep stats driver.

Checks for in-flight regulator requests in the RPMh RSC driver is improved to deal with the fact that these occupy multiple registers, so it's insufficient to just to direct address comparison.

The socinfo drivers learns about X1 Elite and SMB2360 PMIC.

The maintainers entry is split between the linux-arm-msm list and subset that is maintained in the qcom-soc tree, to avoid some confusion about maintainership.

----------------------------------------------------------------
Abel Vesa (3):
dt-bindings: arm: qcom,ids: Add SoC ID for X1E80100
soc: qcom: socinfo: Add X1E80100 SoC ID table entry
soc: qcom: socinfo: Add SMB2360 PMIC

Bjorn Andersson (2):
Merge branch 'drivers-for-6.10' onto 'v6.9-rc1'
MAINTAINERS: Split Qualcomm SoC and linux-arm-msm entries

Dmitry Baryshkov (2):
soc: qcom: pmic_glink: don't traverse clients list without a lock
soc: qcom: pmic_glink: notify clients about the current state

Gabor Juhos (2):
firmware: qcom_scm: disable clocks if qcom_scm_bw_enable() fails
firmware: qcom_scm: remove IS_ERR() checks from qcom_scm_bw_{en,dis}able()

Justin Stitt (1):
soc: qcom: cmd-db: replace deprecated strncpy with strtomem

Krzysztof Kozlowski (2):
firmware: qcom: qcm: fix unused qcom_scm_qseecom_allowlist
soc: qcom: mention intentionally broken module autoloading

Luca Weiss (1):
dt-bindings: soc: qcom: qcom,pmic-glink: document QCM6490 compatible

Maulik Shah (3):
soc: qcom: Update init level to core_initcall() for cmd-db and rpmh-rsc
soc: qcom: qcom_stats: Add DSPs and apss subsystem stats
soc: qcom: rpmh-rsc: Enhance check for VRM in-flight request

Mukesh Ojha (5):
firmware: qcom: scm: Remove log reporting memory allocation failure
firmware: qcom: scm: Remove redundant scm argument from qcom_scm_waitq_wakeup()
firmware: qcom: scm: Rework dload mode availability check
firmware: qcom: scm: Fix __scm and waitq completion variable initialization
firmware: qcom: scm: Modify only the download bits in TCSR register

wangkaiyuan (1):
soc: qcom: icc-bwmon: Convert to use maple tree register cache

 MAINTAINERS                            | 33 +++++++++++---
 drivers/firmware/qcom/qcom_scm.c       | 79 +++++++++++++++++++++-------------
 drivers/soc/qcom/cmd-db.c              | 41 ++++++++++++++----
 drivers/soc/qcom/icc-bwmon.c           |  8 ++--
 drivers/soc/qcom/pmic_glink.c          |  9 ++++
 drivers/soc/qcom/pmic_pdcharger_ulog.c |  4 ++
 drivers/soc/qcom/qcom_stats.c          |  4 ++
 drivers/soc/qcom/rpm_master_stats.c    |  4 ++
 drivers/soc/qcom/rpmh-rsc.c            |  5 ++-
 drivers/soc/qcom/socinfo.c             |  2 +
 include/dt-bindings/arm/qcom,ids.h     |  1 +
 include/soc/qcom/cmd-db.h              | 10 ++++-
 12 files changed, 151 insertions(+), 49 deletions(-)
#1 lore raw
This pull request was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:

Hello:

This pull request was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:

Quoted 9 lines · On Sat, 27 Apr 2024 11:09:16 -0500 you wrote:

The following changes since commit 4cece764965020c22cff7665b18a012006359095:

Linux 6.9-rc1 (2024-03-24 14:10:05 -0700)

are available in the Git repository at:

https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux.git tags/qcom-drivers-for-6.10

[...]

Here is the summary with links:
- [GIT,PULL] Qualcomm driver updates for v6.10

    https://git.kernel.org/soc/soc/c/02c2c1900feb

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html