clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
Subsystems (3)
PATCH 1/1 clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
The clk_alpha_pll_stromer_plus_set_rate() function does not sets the ALPHA_EN bit in the USER_CTL register, so setting rates which requires using alpha mode works only if the bit gets set already prior calling the function.
Extend the function to set the ALPHA_EN bit in order to allow using fractional rates regardless whether the bit gets set previously or not.
---
Based on 'qcom-clk-for-6.10'
---
--- drivers/clk/qcom/clk-alpha-pll.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/clk/qcom/clk-alpha-pll.c +3 -0
@@ -2574,6 +2574,9 @@ static int clk_alpha_pll_stromer_plus_set_rate(struct clk_hw *hw,regmap_write (pll->clkr.regmap,PLL_ALPHA_VAL_U (pll), a >>ALPHA_BITWIDTH ); +regmap_update_bits (pll->clkr.regmap,PLL_USER_CTL (pll), +PLL_ALPHA_EN ,PLL_ALPHA_EN ); +regmap_write (pll->clkr.regmap,PLL_MODE (pll),PLL_BYPASSNL );/* Wait five micro seconds or more */
---
base-commit: 3c5b3e17b8fd1f1add5a9477306c355fab126977
change-id: 20240508-stromer-plus-alpha-en-0a4a4c6df28c
Best regards,
Signature · 1 line
Gabor Juhos <[email protected]>
Quoted 10 lines · Gabor Juhos
The
clk_alpha_pll_stromer_plus_set_rate()function does not sets theALPHA_ENbit in theUSER_CTLregister, so setting rates which requires using alpha mode works only if the bit gets set already prior calling the function.Extend the function to set the
ALPHA_ENbit in order to allow using fractional rates regardless whether the bit gets set previously or not.[...]
Applied, thanks!
[1/1] clk: qcom: clk-alpha-pll: set ALPHA_EN bit for Stromer Plus PLLs
commit: 5a33a64524e6381c399e5e42571d9363ffc0bed4
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>