Skip to contentSkip to conversation

net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters

PATCH Applied Xiaolei Wang 3 participants 3 messages Jun 8, 2024 – Jun 12, 2024

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

PATCH v5 1/1 net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters

The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula.

Fixes 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")

---

Change log:

v1:

    https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/

v2:
Update CBS parameters when speed changes after linking up
https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
v3:

    replace priv->speed with the  portTransmitRate from the tc-cbs parameters suggested by Vladimir Oltean
    link: https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/
v4:
    Delete speed_div variable, delete redundant port_transmit_rate_kbps = qopt->idleslope - qopt->sendslope; and update commit log
    https://patchwork.kernel.org/project/linux-arm-kernel/patch/[email protected]/

v5:
use reverse Christmas tree (RCT) variable ordering and If the portTransmitRate(idleSlope - sendSlope) parameter is invalid, add an error output to avoid user misunderstanding

 .../net/ethernet/stmicro/stmmac/stmmac_tc.c   | 25 ++++++++-----------
 1 file changed, 11 insertions(+), 14 deletions(-)
drivers/net/ethernet/stmicro/stmmac/stmmac_tc.c +11 -14
index 222540b55480..1562fbdd0a04 100644
@@ -343,10 +343,11 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 			struct tc_cbs_qopt_offload *qopt)
 {
 	u32 tx_queues_count = priv->plat->tx_queues_to_use;
+	s64 port_transmit_rate_kbps;
 	u32 queue = qopt->queue;
-	u32 ptr, speed_div;
 	u32 mode_to_use;
 	u64 value;
+	u32 ptr;
 	int ret;
 
 	/* Queue 0 is not AVB capable */
@@ -355,30 +356,26 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 	if (!priv->dma_cap.av)
 		return -EOPNOTSUPP;
 
+	port_transmit_rate_kbps = qopt->idleslope - qopt->sendslope;
+
 	/* Port Transmit Rate and Speed Divider */
-	switch (priv->speed) {
+	switch (div_s64(port_transmit_rate_kbps, 1000)) {
 	case SPEED_10000:
-		ptr = 32;
-		speed_div = 10000000;
-		break;
 	case SPEED_5000:
 		ptr = 32;
-		speed_div = 5000000;
 		break;
 	case SPEED_2500:
-		ptr = 8;
-		speed_div = 2500000;
-		break;
 	case SPEED_1000:
 		ptr = 8;
-		speed_div = 1000000;
 		break;
 	case SPEED_100:
 		ptr = 4;
-		speed_div = 100000;
 		break;
 	default:
-		return -EOPNOTSUPP;
+		netdev_err(priv->dev,
+			   "Invalid portTransmitRate %lld (idleSlope - sendSlope)\n",
+			   port_transmit_rate_kbps);
+		return -EINVAL;
 	}
 
 	mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use;
@@ -398,10 +395,10 @@ static int tc_setup_cbs(struct stmmac_priv *priv,
 	}
 
 	/* Final adjustments for HW */
-	value = div_s64(qopt->idleslope * 1024ll * ptr, speed_div);
+	value = div_s64(qopt->idleslope * 1024ll * ptr, port_transmit_rate_kbps);
 	priv->plat->tx_queues_cfg[queue].idle_slope = value & GENMASK(31, 0);
 
-	value = div_s64(-qopt->sendslope * 1024ll * ptr, speed_div);
+	value = div_s64(-qopt->sendslope * 1024ll * ptr, port_transmit_rate_kbps);
 	priv->plat->tx_queues_cfg[queue].send_slope = value & GENMASK(31, 0);
 
 	value = qopt->hicredit * 1024ll * 8;
Signature · 1 line
2.25.1
Reviewed-by on v5 1/1
#1 lore raw
Quoted 9 lines · Xiaolei Wang

The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula.

Quoted 4 lines
Fixes 1f705bc61aee ("net: stmmac: Add support for CBS QDISC")

---

#2 lore raw
In reply to Xiaolei Wang
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 10 lines · On Sat, 8 Jun 2024 22:35:24 +0800 you wrote:

The current cbs parameter depends on speed after uplinking, which is not needed and will report a configuration error if the port is not initially connected. The UAPI exposed by tc-cbs requires userspace to recalculate the send slope anyway, because the formula depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. Therefore, we use offload->sendslope and offload->idleslope to derive the original port_transmit_rate from the CBS formula.

[...]

Here is the summary with links:
- [net,v5] net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters

    https://git.kernel.org/netdev/net/c/be27b8965297

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html