Skip to contentSkip to conversation

bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response

PATCH Applied Michael Chan 2 participants 2 messages Jun 12, 2024 – Jun 13, 2024

Subsystems (3)
lore
Share & tools
lore

Michael Chan

author maintainer
#0 lore raw

PATCH v3 1/1 bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response

Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize.

Fix it by capping the HWRM_PORT_PHY_QCFG response to the maximum 96 bytes. The SPEEDS2_SUPPORTED flag needs to be cleared because the new speeds2 fields are beyond the legacy structure. Also modify bnxt_hwrm_fwd_resp() to print a warning if the message size exceeds 96 bytes to make this failure more obvious.

Fixes 84a911db8305 ("bnxt_en: Update firmware interface to 1.10.2.118")

---
v3: Add comment that the last byte of the compat struct is different from
the original struct.
Use {} to zero the struct instead of {0}.

v2: Remove Bug and ChangeID from ChangeLog
Add comment to explain the clearing of the SPEEDS2_SUPPORTED flag

 drivers/net/ethernet/broadcom/bnxt/bnxt.h     | 51 +++++++++++++++++++
 .../net/ethernet/broadcom/bnxt/bnxt_sriov.c   | 12 ++++-
 2 files changed, 61 insertions(+), 2 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.h +51 -0
index 656ab81c0272..bbc7edccd5a4 100644
@@ -1434,6 +1434,57 @@ struct bnxt_l2_filter {
 	atomic_t		refcnt;
 };
 
+/* Compat version of hwrm_port_phy_qcfg_output capped at 96 bytes.  The
+ * first 95 bytes are identical to hwrm_port_phy_qcfg_output in bnxt_hsi.h.
+ * The last valid byte in the compat version is different.
+ */
+struct hwrm_port_phy_qcfg_output_compat {
+	__le16	error_code;
+	__le16	req_type;
+	__le16	seq_id;
+	__le16	resp_len;
+	u8	link;
+	u8	active_fec_signal_mode;
+	__le16	link_speed;
+	u8	duplex_cfg;
+	u8	pause;
+	__le16	support_speeds;
+	__le16	force_link_speed;
+	u8	auto_mode;
+	u8	auto_pause;
+	__le16	auto_link_speed;
+	__le16	auto_link_speed_mask;
+	u8	wirespeed;
+	u8	lpbk;
+	u8	force_pause;
+	u8	module_status;
+	__le32	preemphasis;
+	u8	phy_maj;
+	u8	phy_min;
+	u8	phy_bld;
+	u8	phy_type;
+	u8	media_type;
+	u8	xcvr_pkg_type;
+	u8	eee_config_phy_addr;
+	u8	parallel_detect;
+	__le16	link_partner_adv_speeds;
+	u8	link_partner_adv_auto_mode;
+	u8	link_partner_adv_pause;
+	__le16	adv_eee_link_speed_mask;
+	__le16	link_partner_adv_eee_link_speed_mask;
+	__le32	xcvr_identifier_type_tx_lpi_timer;
+	__le16	fec_cfg;
+	u8	duplex_state;
+	u8	option_flags;
+	char	phy_vendor_name[16];
+	char	phy_vendor_partnumber[16];
+	__le16	support_pam4_speeds;
+	__le16	force_pam4_link_speed;
+	__le16	auto_pam4_link_speed_mask;
+	u8	link_partner_pam4_adv_speeds;
+	u8	valid;
+};
+
 struct bnxt_link_info {
 	u8			phy_type;
 	u8			media_type;
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +10 -2
index 175192ebaa77..22898d3d088b 100644
@@ -950,8 +950,11 @@ static int bnxt_hwrm_fwd_resp(struct bnxt *bp, struct bnxt_vf_info *vf,
 	struct hwrm_fwd_resp_input *req;
 	int rc;
 
-	if (BNXT_FWD_RESP_SIZE_ERR(msg_size))
+	if (BNXT_FWD_RESP_SIZE_ERR(msg_size)) {
+		netdev_warn_once(bp->dev, "HWRM fwd response too big (%d bytes)\n",
+				 msg_size);
 		return -EINVAL;
+	}
 
 	rc = hwrm_req_init(bp, req, HWRM_FWD_RESP);
 	if (!rc) {
@@ -1085,7 +1088,7 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 		rc = bnxt_hwrm_exec_fwd_resp(
 			bp, vf, sizeof(struct hwrm_port_phy_qcfg_input));
 	} else {
-		struct hwrm_port_phy_qcfg_output phy_qcfg_resp = {0};
+		struct hwrm_port_phy_qcfg_output_compat phy_qcfg_resp = {};
 		struct hwrm_port_phy_qcfg_input *phy_qcfg_req;
 
 		phy_qcfg_req =
@@ -1096,6 +1099,11 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
 		mutex_unlock(&bp->link_lock);
 		phy_qcfg_resp.resp_len = cpu_to_le16(sizeof(phy_qcfg_resp));
 		phy_qcfg_resp.seq_id = phy_qcfg_req->seq_id;
+		/* New SPEEDS2 fields are beyond the legacy structure, so
+		 * clear the SPEEDS2_SUPPORTED flag.
+		 */
+		phy_qcfg_resp.option_flags &=
+			~PORT_PHY_QCAPS_RESP_FLAGS2_SPEEDS2_SUPPORTED;
 		phy_qcfg_resp.valid = 1;
 
 		if (vf->flags & BNXT_VF_LINK_UP) {
Signature · 1 line
2.30.1
#1 lore raw
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 8 lines · On Wed, 12 Jun 2024 16:17:36 -0700 you wrote:

Firmware interface 1.10.2.118 has increased the size of HWRM_PORT_PHY_QCFG response beyond the maximum size that can be forwarded. When the VF's link state is not the default auto state, the PF will need to forward the response back to the VF to indicate the forced state. This regression may cause the VF to fail to initialize.

[...]

Here is the summary with links:
- [net,v3] bnxt_en: Cap the size of HWRM_PORT_PHY_QCFG forwarded response

    https://git.kernel.org/netdev/net/c/7d9df38c9c03

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html