ASoC: dt-bindings: realtek,rt5659: Convert to dtschema
Subsystems (3)
PATCH v2 1/1 ASoC: dt-bindings: realtek,rt5659: Convert to dtschema
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
---
Changes in v2:
- Dropped redundant descriptions from reg, interrupts and clocks.
- Added default to gpio properties.
- Dropped sound-name-prefix: true
--- .../bindings/sound/realtek,rt5659.yaml | 129 ++++++++++++++++++ .../devicetree/bindings/sound/rt5659.txt | 89 ------------ 2 files changed, 129 insertions(+), 89 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5659.yaml delete mode 100644 Documentation/devicetree/bindings/sound/rt5659.txt
Documentation/devicetree/bindings/sound/realtek,rt5659.yaml new file +129 -0
@@ -0,0 +1,129 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/realtek,rt5659.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT5659/RT5658 audio CODEC + +maintainers: + - Animesh Agarwal <[email protected]> + +description: | + This device supports I2C only. + + Pins on the device (for linking into audio routes) for RT5659/RT5658: + * DMIC L1 + * DMIC R1 + * DMIC L2 + * DMIC R2 + * IN1P + * IN1N + * IN2P + * IN2N + * IN3P + * IN3N + * IN4P + * IN4N + * HPOL + * HPOR + * SPOL + * SPOR + * LOUTL + * LOUTR + * MONOOUT + * PDML + * PDMR + * SPDIF + +allOf: + - $ref: dai-common.yaml# + +properties: + compatible: + enum: + - realtek,rt5659 + - realtek,rt5658 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: mclk + + realtek,dmic1-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic1 is not used + - 1 # using IN2N pin as dmic1 data pin + - 2 # using GPIO5 pin as dmic1 data pin + - 3 # using GPIO9 pin as dmic1 data pin + - 4 # using GPIO11 pin as dmic1 data pin + description: Specify which pin to be used as DMIC1 data pin. + default: 0 + + realtek,dmic2-data-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # dmic2 is not used + - 1 # using IN2P pin as dmic2 data pin + - 2 # using GPIO6 pin as dmic2 data pin + - 3 # using GPIO10 pin as dmic2 data pin + - 4 # using GPIO12 pin as dmic2 data pin + description: Specify which pin to be used as DMIC2 data pin. + default: 0 + + realtek,jd-src: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: + - 0 # No JD is used + - 1 # using JD3 as JD source + - 2 # JD source for Intel HDA header + description: Specify which JD source be used. + default: 0 + + realtek,ldo1-en-gpios: + maxItems: 1 + description: CODEC's LDO1_EN pin. + + realtek,reset-gpios: + maxItems: 1 + description: CODEC's RESET pin. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + codec@1b { + compatible = "realtek,rt5659"; + reg = <0x1b>; + interrupt-parent = <&gpio>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; + realtek,ldo1-en-gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + };
Documentation/devicetree/bindings/sound/rt5659.txt deleted +0 -89
89 lines not on this page · raw message
Signature · 1 line
2.45.2
Quoted 10 lines · Animesh Agarwal
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
Signed-off-by Animesh Agarwal <[email protected]>Cc Daniel Baluta <[email protected]>---
Changes in v2:
- Dropped redundant descriptions from reg, interrupts and clocks.
- Added default to gpio properties.
- Dropped sound-name-prefix: true
Quoted 7 lines
--- .../bindings/sound/realtek,rt5659.yaml | 129 ++++++++++++++++++ .../devicetree/bindings/sound/rt5659.txt | 89 ------------ 2 files changed, 129 insertions(+), 89 deletions(-) create mode 100644 Documentation/devicetree/bindings/sound/realtek,rt5659.yaml delete mode 100644 Documentation/devicetree/bindings/sound/rt5659.txt
Mark Brown
maintainerQuoted 3 lines · Animesh Agarwal
Convert the RT5659/RT5658 audio CODEC bindings to DT schema.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: dt-bindings: realtek,rt5659: Convert to dtschema
commit: 878f4c36f9235e8a15fe0c2ecde066d92c50c8ff
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark