Skip to contentSkip to conversation

f2fs: fix to update user block counts in block_operations()

PATCH Applied Chao Yu 2 participants 2 messages Jun 25, 2024 – Jul 15, 2024 F2FS file system

lore
Share & tools
lore

Chao Yu

author maintainer
#0 lore raw

PATCH v2 1/1 f2fs: fix to update user block counts in block_operations()

Commit 59c9081bc86e ("f2fs: allow write page cache when writting cp") allows write() to write data to page cache during checkpoint, so block count fields like .total_valid_block_count, .alloc_valid_block_count and .rf_node_block_count may encounter race condition as below:

CP Thread A
- write_checkpoint
- block_operations
- f2fs_down_write(&sbi->node_change)
- __prepare_cp_block
: ckpt->valid_block_count = .total_valid_block_count
- f2fs_up_write(&sbi->node_change)
- write
- f2fs_preallocate_blocks
- f2fs_map_blocks(,F2FS_GET_BLOCK_PRE_AIO)
- f2fs_map_lock
- f2fs_down_read(&sbi->node_change)
- f2fs_reserve_new_blocks
- inc_valid_block_count
: percpu_counter_add(&sbi->alloc_valid_block_count, count) : sbi->total_valid_block_count += count
- f2fs_up_read(&sbi->node_change)
- do_checkpoint
: sbi->last_valid_block_count = sbi->total_valid_block_count
: percpu_counter_set(&sbi->alloc_valid_block_count, 0)
: percpu_counter_set(&sbi->rf_node_block_count, 0)
- fsync
- need_do_checkpoint
- f2fs_space_for_roll_forward
: alloc_valid_block_count was reset to zero,
so, it may missed last data during checkpoint

Let's change to update .total_valid_block_count, .alloc_valid_block_count and .rf_node_block_count in block_operations(), then their access can be protected by .node_change and .cp_rwsem lock, so that it can avoid above race condition.

Fixes 59c9081bc86e ("f2fs: allow write page cache when writting cp")
Cc Yunlei He <[email protected]>

---
v2:
- update user_block_counts in __prepare_cp_block() suggested by Jaegeuk.

 fs/f2fs/checkpoint.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)
fs/f2fs/checkpoint.c +5 -5
index 7cfe4e01dd7e..bdd96329dddd 100644
@@ -1186,6 +1186,11 @@ static void __prepare_cp_block(struct f2fs_sb_info *sbi)
 	ckpt->valid_node_count = cpu_to_le32(valid_node_count(sbi));
 	ckpt->valid_inode_count = cpu_to_le32(valid_inode_count(sbi));
 	ckpt->next_free_nid = cpu_to_le32(last_nid);
+
+	/* update user_block_counts */
+	sbi->last_valid_block_count = sbi->total_valid_block_count;
+	percpu_counter_set(&sbi->alloc_valid_block_count, 0);
+	percpu_counter_set(&sbi->rf_node_block_count, 0);
 }
 
 static bool __need_flush_quota(struct f2fs_sb_info *sbi)
@@ -1575,11 +1580,6 @@ static int do_checkpoint(struct f2fs_sb_info *sbi, struct cp_control *cpc)
 		start_blk += NR_CURSEG_NODE_TYPE;
 	}
 
-	/* update user_block_counts */
-	sbi->last_valid_block_count = sbi->total_valid_block_count;
-	percpu_counter_set(&sbi->alloc_valid_block_count, 0);
-	percpu_counter_set(&sbi->rf_node_block_count, 0);
-
 	/* Here, we have one bio having CP pack except cp pack 2 page */
 	f2fs_sync_meta_pages(sbi, META, LONG_MAX, FS_CP_META_IO);
 	/* Wait for all dirty meta pages to be submitted for IO */
Signature · 1 line
2.40.1
#1 lore raw
This patch was applied to jaegeuk/f2fs.git (dev) by Jaegeuk Kim <[email protected]>:

Hello:

This patch was applied to jaegeuk/f2fs.git (dev)
by Jaegeuk Kim <[email protected]>:

Quoted 32 lines · On Tue, 25 Jun 2024 10:32:39 +0800 you wrote:

Commit 59c9081bc86e ("f2fs: allow write page cache when writting cp") allows write() to write data to page cache during checkpoint, so block count fields like .total_valid_block_count, .alloc_valid_block_count and .rf_node_block_count may encounter race condition as below:

CP Thread A
- write_checkpoint
- block_operations
- f2fs_down_write(&sbi->node_change)
- __prepare_cp_block
: ckpt->valid_block_count = .total_valid_block_count
- f2fs_up_write(&sbi->node_change)
- write
- f2fs_preallocate_blocks
- f2fs_map_blocks(,F2FS_GET_BLOCK_PRE_AIO)
- f2fs_map_lock
- f2fs_down_read(&sbi->node_change)
- f2fs_reserve_new_blocks
- inc_valid_block_count
: percpu_counter_add(&sbi->alloc_valid_block_count, count) : sbi->total_valid_block_count += count
- f2fs_up_read(&sbi->node_change)
- do_checkpoint
: sbi->last_valid_block_count = sbi->total_valid_block_count
: percpu_counter_set(&sbi->alloc_valid_block_count, 0)
: percpu_counter_set(&sbi->rf_node_block_count, 0)
- fsync
- need_do_checkpoint
- f2fs_space_for_roll_forward
: alloc_valid_block_count was reset to zero,
so, it may missed last data during checkpoint

Quoted 1 line

[...]

Here is the summary with links:
- [f2fs-dev,v2] f2fs: fix to update user block counts in block_operations()

    https://git.kernel.org/jaegeuk/f2fs/c/f06c0f82e38b

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html