Skip to contentSkip to conversation

bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()

PATCH Applied Michael Chan 3 participants 7 messages Aug 6, 2024 – Aug 8, 2024

Subsystems (3)
lore
Share & tools
lore

Michael Chan

author maintainer
#0 lore raw

PATCH 1/1 bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
---
 drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +7 -6
index 23f74c6c88b9..e27e1082ee33 100644
@@ -7591,19 +7591,20 @@ static bool bnxt_need_reserve_rings(struct bnxt *bp)
 	int rx = bp->rx_nr_rings, stat;
 	int vnic, grp = rx;
 
-	if (hw_resc->resv_tx_rings != bp->tx_nr_rings &&
-	    bp->hwrm_spec_code >= 0x10601)
-		return true;
-
 	/* Old firmware does not need RX ring reservations but we still
 	 * need to setup a default RSS map when needed.  With new firmware
 	 * we go through RX ring reservations first and then set up the
 	 * RSS map for the successfully reserved RX rings when needed.
 	 */
-	if (!BNXT_NEW_RM(bp)) {
+	if (!BNXT_NEW_RM(bp))
 		bnxt_check_rss_tbl_no_rmgr(bp);
+
+	if (hw_resc->resv_tx_rings != bp->tx_nr_rings &&
+	    bp->hwrm_spec_code >= 0x10601)
+		return true;
+
+	if (!BNXT_NEW_RM(bp))
 		return false;
-	}
 
 	vnic = bnxt_get_total_vnics(bp, rx);
 
Signature · 1 line
2.30.1
Tested-by on v1 1/1
#1 lore raw
Quoted 39 lines · Michael Chan

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Quoted 7 lines
Tested-by on v1 1/1
#2 lore raw
In reply to Michael Chan
Quoted 39 lines · Michael Chan

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Quoted 7 lines
Tested-by on v1 1/1
#3 lore raw
In reply to Michael Chan
Quoted 39 lines · Michael Chan

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Quoted 7 lines
Tested-by on v1 1/1
#4 lore raw
In reply to Michael Chan
Quoted 39 lines · Michael Chan

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Quoted 7 lines
Tested-by on v1 1/1
#5 lore raw
In reply to Michael Chan
Quoted 39 lines · Michael Chan

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

With older firmware, RX ring reservations are not required and so hw_resc->resv_rx_rings is not always set to the proper value. The comparison:

if (old_rx_rings != bp->hw_resc.resv_rx_rings)

in __bnxt_reserve_rings() may be false even when the RX rings are changing. This will cause __bnxt_reserve_rings() to skip setting the default RSS indirection table to default to match the current number of RX rings. This may later cause bnxt_fill_hw_rss_tbl() to use an out-of-range index.

We already have bnxt_check_rss_tbl_no_rmgr() to handle exactly this scenario. We just need to move it up in bnxt_need_reserve_rings() to be called unconditionally when using older firmware. Without the fix, if the TX rings are changing, we'll skip the bnxt_check_rss_tbl_no_rmgr() call and __bnxt_reserve_rings() may also skip the bnxt_set_dflt_rss_indir_tbl() call for the reason explained in the last paragraph. Without setting the default RSS indirection table to default, it causes the regression:

BUG: KASAN: slab-out-of-bounds in __bnxt_hwrm_vnic_set_rss+0xb79/0xe40
Read of size 2 at addr ffff8881c5809618 by task ethtool/31525
Call Trace:
__bnxt_hwrm_vnic_set_rss+0xb79/0xe40
 bnxt_hwrm_vnic_rss_cfg_p5+0xf7/0x460
 __bnxt_setup_vnic_p5+0x12e/0x270
 __bnxt_open_nic+0x2262/0x2f30
 bnxt_open_nic+0x5d/0xf0
 ethnl_set_channels+0x5d4/0xb30
 ethnl_default_set_doit+0x2f1/0x620
Quoted 7 lines
#6 lore raw
In reply to Michael Chan
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 8 lines · On Mon, 5 Aug 2024 22:37:42 -0700 you wrote:

A recent commit has modified the code in __bnxt_reserve_rings() to set the default RSS indirection table to default only when the number of RX rings is changing. While this works for newer firmware that requires RX ring reservations, it causes the regression on older firmware not requiring RX ring resrvations (BNXT_NEW_RM() returns false).

[...]

Here is the summary with links:
- [net] bnxt_en : Fix memory out-of-bounds in bnxt_fill_hw_rss_tbl()

    https://git.kernel.org/netdev/net/c/da03f5d1b2c3

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html