selftests: fib_rule_tests: Cleanups and new tests
Subsystems (4)
Ido Schimmel
maintainercover selftests: fib_rule_tests: Cleanups and new tests
This patchset performs some cleanups and adds new tests in preparation for upcoming FIB rule DSCP selector.
Ido Schimmel (5):
selftests: fib_rule_tests: Remove unused functions
selftests: fib_rule_tests: Clarify test results
selftests: fib_rule_tests: Add negative match tests
selftests: fib_rule_tests: Add negative connect tests
selftests: fib_rule_tests: Test TOS matching with input routes
tools/testing/selftests/net/fib_rule_tests.sh | 181 +++++++++++++----- 1 file changed, 135 insertions(+), 46 deletions(-)
Signature · 1 line
2.46.0
Ido Schimmel
maintainerPATCH 1/5 selftests: fib_rule_tests: Remove unused functions
The functions are unused since commit 816cda9ae531 ("selftests: net:fib_rule_tests: add support to select a test to run"). Remove them.
--- tools/testing/selftests/net/fib_rule_tests.sh | 16 ---------------- 1 file changed, 16 deletions(-)
tools/testing/selftests/net/fib_rule_tests.sh +0 -16
@@ -56,14 +56,6 @@ log_test() fi } -log_section() -{ - echo - echo "######################################################################" - echo "TEST SECTION: $*" - echo "######################################################################" -} - check_nettest() { if which nettest > /dev/null 2>&1; then
@@ -453,14 +445,6 @@ fib_rule4_connect_test() $IP -4 rule del dsfield 0x04 table $RTABLE_PEER cleanup_peer } - -run_fibrule_tests() -{ - log_section "IPv4 fib rule" - fib_rule4_test - log_section "IPv6 fib rule" - fib_rule6_test -} ################################################################################ # usage
Signature · 1 line
2.46.0
Ido Schimmel
maintainerPATCH 2/5 selftests: fib_rule_tests: Clarify test results
In reply to Ido SchimmelClarify the test results by grouping the output of test cases belonging to the same test under a common title. This is consistent with the output of fib_tests.sh.
Before:
# ./fib_rule_tests.sh
TEST: rule6 check: oif redirect to table [ OK ]
TEST: rule6 del by pref: oif redirect to table [ OK ]
[...]
TEST: rule4 check: oif redirect to table [ OK ]
TEST: rule4 del by pref: oif redirect to table [ OK ]
[...]
Tests passed: 116
Tests failed: 0
After:
# ./fib_rule_tests.sh
IPv6 FIB rule tests
TEST: rule6 check: oif redirect to table [ OK ]
TEST: rule6 del by pref: oif redirect to table [ OK ]
[...]
IPv4 FIB rule tests
TEST: rule4 check: oif redirect to table [ OK ]
TEST: rule4 del by pref: oif redirect to table [ OK ]
[...]
Tests passed: 116
Tests failed: 0
--- tools/testing/selftests/net/fib_rule_tests.sh | 27 ++++++++++++------- 1 file changed, 18 insertions(+), 9 deletions(-)
tools/testing/selftests/net/fib_rule_tests.sh +18 -9
@@ -35,18 +35,13 @@ log_test() local expected=$2 local msg="$3" - $IP rule show | grep -q l3mdev - if [ $? -eq 0 ]; then - msg="$msg (VRF)" - fi - if [ ${rc} -eq ${expected} ]; then nsuccess=$((nsuccess+1)) - printf "\n TEST: %-60s [ OK ]\n" "${msg}" + printf " TEST: %-60s [ OK ]\n" "${msg}" else ret=1 nfail=$((nfail+1)) - printf "\n TEST: %-60s [FAIL]\n" "${msg}" + printf " TEST: %-60s [FAIL]\n" "${msg}" if [ "${PAUSE_ON_FAIL}" = "yes" ]; then echo echo "hit enter to continue, 'q' to quit"
@@ -205,10 +200,14 @@ fib_rule6_test_reject() fib_rule6_test() { + local ext_name=$1; shift local getmatch local match local cnt + echo + echo "IPv6 FIB rule tests $ext_name" + # setup the fib rule redirect route $IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink
@@ -267,7 +266,7 @@ fib_rule6_test() fib_rule6_vrf_test() { setup_vrf - fib_rule6_test + fib_rule6_test "- with VRF" cleanup_vrf }
@@ -277,6 +276,9 @@ fib_rule6_connect_test() { local dsfield + echo + echo "IPv6 FIB rule connect tests" + if ! check_nettest; then echo "SKIP: Could not run test without nettest tool" return
@@ -344,10 +346,14 @@ fib_rule4_test_reject() fib_rule4_test() { + local ext_name=$1; shift local getmatch local match local cnt + echo + echo "IPv4 FIB rule tests $ext_name" + # setup the fib rule redirect route $IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink
@@ -411,7 +417,7 @@ fib_rule4_test() fib_rule4_vrf_test() { setup_vrf - fib_rule4_test + fib_rule4_test "- with VRF" cleanup_vrf }
@@ -421,6 +427,9 @@ fib_rule4_connect_test() { local dsfield + echo + echo "IPv4 FIB rule connect tests" + if ! check_nettest; then echo "SKIP: Could not run test without nettest tool" return
Signature · 1 line
2.46.0
Ido Schimmel
maintainerPATCH 3/5 selftests: fib_rule_tests: Add negative match tests
In reply to Ido SchimmelThe fib_rule{4,6} tests verify the behavior of a given FIB rule selector (e.g., dport, sport) by redirecting to a routing table with a default route using a FIB rule with the given selector and checking that a route lookup using the selector matches this default route.
Add negative tests to verify that a FIB rule is not hit when it should not.
--- tools/testing/selftests/net/fib_rule_tests.sh | 87 +++++++++++++++---- 1 file changed, 69 insertions(+), 18 deletions(-)
tools/testing/selftests/net/fib_rule_tests.sh +69 -18
@@ -174,12 +174,17 @@ fib_rule6_test_match_n_redirect() { local match="$1" local getmatch="$2" - local description="$3" + local getnomatch="$3" + local description="$4" + local nomatch_description="$5" $IP -6 rule add $match table $RTABLE $IP -6 route get $GW_IP6 $getmatch | grep -q "table $RTABLE" log_test $? 0 "rule6 check: $description" + $IP -6 route get $GW_IP6 $getnomatch 2>&1 | grep -q "table $RTABLE" + log_test $? 1 "rule6 check: $nomatch_description" + fib_rule6_del_by_pref "$match" log_test $? 0 "rule6 del by pref: $description" }
@@ -201,6 +206,7 @@ fib_rule6_test_reject() fib_rule6_test() { local ext_name=$1; shift + local getnomatch local getmatch local match local cnt
@@ -212,10 +218,14 @@ fib_rule6_test() $IP -6 route add table $RTABLE default via $GW_IP6 dev $DEV onlink match="oif $DEV" - fib_rule6_test_match_n_redirect "$match" "$match" "oif redirect to table" + getnomatch="oif lo" + fib_rule6_test_match_n_redirect "$match" "$match" "$getnomatch" \ + "oif redirect to table" "oif no redirect to table" match="from $SRC_IP6 iif $DEV" - fib_rule6_test_match_n_redirect "$match" "$match" "iif redirect to table" + getnomatch="from $SRC_IP6 iif lo" + fib_rule6_test_match_n_redirect "$match" "$match" "$getnomatch" \ + "iif redirect to table" "iif no redirect to table" # Reject dsfield (tos) options which have ECN bits set for cnt in $(seq 1 3); do
@@ -229,37 +239,52 @@ fib_rule6_test() # Using option 'tos' instead of 'dsfield' as old iproute2 # versions don't support 'dsfield' in ip rule show. getmatch="tos $cnt" + getnomatch="tos 0x20" fib_rule6_test_match_n_redirect "$match" "$getmatch" \ - "$getmatch redirect to table" + "$getnomatch" "$getmatch redirect to table" \ + "$getnomatch no redirect to table" done match="fwmark 0x64" getmatch="mark 0x64" - fib_rule6_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" + getnomatch="mark 0x63" + fib_rule6_test_match_n_redirect "$match" "$getmatch" "$getnomatch" \ + "fwmark redirect to table" "fwmark no redirect to table" fib_check_iproute_support "uidrange" "uid" if [ $? -eq 0 ]; then match="uidrange 100-100" getmatch="uid 100" - fib_rule6_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" + getnomatch="uid 101" + fib_rule6_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "uid redirect to table" \ + "uid no redirect to table" fi fib_check_iproute_support "sport" "sport" if [ $? -eq 0 ]; then match="sport 666 dport 777" - fib_rule6_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" + getnomatch="sport 667 dport 778" + fib_rule6_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "sport and dport redirect to table" \ + "sport and dport no redirect to table" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto tcp" - fib_rule6_test_match_n_redirect "$match" "$match" "ipproto match" + getnomatch="ipproto udp" + fib_rule6_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "ipproto tcp match" "ipproto udp no match" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto ipv6-icmp" - fib_rule6_test_match_n_redirect "$match" "$match" "ipproto ipv6-icmp match" + getnomatch="ipproto tcp" + fib_rule6_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "ipproto ipv6-icmp match" \ + "ipproto ipv6-tcp no match" fi }
@@ -320,12 +345,17 @@ fib_rule4_test_match_n_redirect() { local match="$1" local getmatch="$2" - local description="$3" + local getnomatch="$3" + local description="$4" + local nomatch_description="$5" $IP rule add $match table $RTABLE $IP route get $GW_IP4 $getmatch | grep -q "table $RTABLE" log_test $? 0 "rule4 check: $description" + $IP route get $GW_IP4 $getnomatch 2>&1 | grep -q "table $RTABLE" + log_test $? 1 "rule4 check: $nomatch_description" + fib_rule4_del_by_pref "$match" log_test $? 0 "rule4 del by pref: $description" }
@@ -347,6 +377,7 @@ fib_rule4_test_reject() fib_rule4_test() { local ext_name=$1; shift + local getnomatch local getmatch local match local cnt
@@ -358,14 +389,18 @@ fib_rule4_test() $IP route add table $RTABLE default via $GW_IP4 dev $DEV onlink match="oif $DEV" - fib_rule4_test_match_n_redirect "$match" "$match" "oif redirect to table" + getnomatch="oif lo" + fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \ + "oif redirect to table" "oif no redirect to table" # need enable forwarding and disable rp_filter temporarily as all the # addresses are in the same subnet and egress device == ingress device. ip netns exec $testns sysctl -qw net.ipv4.ip_forward=1 ip netns exec $testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0 match="from $SRC_IP iif $DEV" - fib_rule4_test_match_n_redirect "$match" "$match" "iif redirect to table" + getnomatch="from $SRC_IP iif lo" + fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \ + "iif redirect to table" "iif no redirect to table" ip netns exec $testns sysctl -qw net.ipv4.ip_forward=0 # Reject dsfield (tos) options which have ECN bits set
@@ -380,37 +415,53 @@ fib_rule4_test() # Using option 'tos' instead of 'dsfield' as old iproute2 # versions don't support 'dsfield' in ip rule show. getmatch="tos $cnt" + getnomatch="tos 0x20" fib_rule4_test_match_n_redirect "$match" "$getmatch" \ - "$getmatch redirect to table" + "$getnomatch" "$getmatch redirect to table" \ + "$getnomatch no redirect to table" done match="fwmark 0x64" getmatch="mark 0x64" - fib_rule4_test_match_n_redirect "$match" "$getmatch" "fwmark redirect to table" + getnomatch="mark 0x63" + fib_rule4_test_match_n_redirect "$match" "$getmatch" "$getnomatch" \ + "fwmark redirect to table" "fwmark no redirect to table" fib_check_iproute_support "uidrange" "uid" if [ $? -eq 0 ]; then match="uidrange 100-100" getmatch="uid 100" - fib_rule4_test_match_n_redirect "$match" "$getmatch" "uid redirect to table" + getnomatch="uid 101" + fib_rule4_test_match_n_redirect "$match" "$getmatch" \ + "$getnomatch" "uid redirect to table" \ + "uid no redirect to table" fi fib_check_iproute_support "sport" "sport" if [ $? -eq 0 ]; then match="sport 666 dport 777" - fib_rule4_test_match_n_redirect "$match" "$match" "sport and dport redirect to table" + getnomatch="sport 667 dport 778" + fib_rule4_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "sport and dport redirect to table" \ + "sport and dport no redirect to table" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto tcp" - fib_rule4_test_match_n_redirect "$match" "$match" "ipproto tcp match" + getnomatch="ipproto udp" + fib_rule4_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "ipproto tcp match" \ + "ipproto udp no match" fi fib_check_iproute_support "ipproto" "ipproto" if [ $? -eq 0 ]; then match="ipproto icmp" - fib_rule4_test_match_n_redirect "$match" "$match" "ipproto icmp match" + getnomatch="ipproto tcp" + fib_rule4_test_match_n_redirect "$match" "$match" \ + "$getnomatch" "ipproto icmp match" \ + "ipproto tcp no match" fi }
Signature · 1 line
2.46.0
Ido Schimmel
maintainerPATCH 4/5 selftests: fib_rule_tests: Add negative connect tests
In reply to Ido SchimmelThe fib_rule{4,6}_connect tests verify that locally generated traffic from a socket that specifies a DS Field using the IP_TOS / IPV6_TCLASS socket options is correctly redirected using a FIB rule that matches on the given DS Field.
Add negative tests to verify that the FIB rule is not hit when the socket specifies a DS Field that differs from the one used by the FIB rule.
--- tools/testing/selftests/net/fib_rule_tests.sh | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
tools/testing/selftests/net/fib_rule_tests.sh +20 -0
@@ -325,6 +325,16 @@ fib_rule6_connect_test() log_test $? 0 "rule6 dsfield tcp connect (dsfield ${dsfield})" done + # Check that UDP and TCP connections fail when using a DS Field that + # does not match the previously configured FIB rule. + nettest -q -6 -B -t 5 -N $testns -O $peerns -U -D \ + -Q 0x20 -l 2001:db8::1:11 -r 2001:db8::1:11 + log_test $? 1 "rule6 dsfield udp no connect (dsfield 0x20)" + + nettest -q -6 -B -t 5 -N $testns -O $peerns -Q 0x20 \ + -l 2001:db8::1:11 -r 2001:db8::1:11 + log_test $? 1 "rule6 dsfield tcp no connect (dsfield 0x20)" + $IP -6 rule del dsfield 0x04 table $RTABLE_PEER cleanup_peer }
@@ -502,6 +512,16 @@ fib_rule4_connect_test() log_test $? 0 "rule4 dsfield tcp connect (dsfield ${dsfield})" done + # Check that UDP and TCP connections fail when using a DS Field that + # does not match the previously configured FIB rule. + nettest -q -B -t 5 -N $testns -O $peerns -D -U -Q 0x20 \ + -l 198.51.100.11 -r 198.51.100.11 + log_test $? 1 "rule4 dsfield udp no connect (dsfield 0x20)" + + nettest -q -B -t 5 -N $testns -O $peerns -Q 0x20 \ + -l 198.51.100.11 -r 198.51.100.11 + log_test $? 1 "rule4 dsfield tcp no connect (dsfield 0x20)" + $IP -4 rule del dsfield 0x04 table $RTABLE_PEER cleanup_peer }
Signature · 1 line
2.46.0
Ido Schimmel
maintainerPATCH 5/5 selftests: fib_rule_tests: Test TOS matching with input routes
In reply to Ido SchimmelThe TOS value reaches the FIB rule core via different call paths when an input route is looked up compared to an output route.
Re-test TOS matching with input routes to exercise these code paths.
Pass the 'iif' and 'from' selectors separately from the 'get{,no}match' variables as otherwise the test name is too long to be printed without misalignments.
--- tools/testing/selftests/net/fib_rule_tests.sh | 31 +++++++++++++++++-- 1 file changed, 28 insertions(+), 3 deletions(-)
tools/testing/selftests/net/fib_rule_tests.sh +28 -3
@@ -245,6 +245,19 @@ fib_rule6_test() "$getnomatch no redirect to table" done + # Re-test TOS matching, but with input routes since they are handled + # differently from output routes. + match="tos 0x10" + for cnt in "0x10" "0x11" "0x12" "0x13"; do + getmatch="tos $cnt" + getnomatch="tos 0x20" + fib_rule6_test_match_n_redirect "$match" \ + "from $SRC_IP6 iif $DEV $getmatch" \ + "from $SRC_IP6 iif $DEV $getnomatch" \ + "iif $getmatch redirect to table" \ + "iif $getnomatch no redirect to table" + done + match="fwmark 0x64" getmatch="mark 0x64" getnomatch="mark 0x63"
@@ -403,15 +416,14 @@ fib_rule4_test() fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \ "oif redirect to table" "oif no redirect to table" - # need enable forwarding and disable rp_filter temporarily as all the - # addresses are in the same subnet and egress device == ingress device. + # Enable forwarding and disable rp_filter as all the addresses are in + # the same subnet and egress device == ingress device. ip netns exec $testns sysctl -qw net.ipv4.ip_forward=1 ip netns exec $testns sysctl -qw net.ipv4.conf.$DEV.rp_filter=0 match="from $SRC_IP iif $DEV" getnomatch="from $SRC_IP iif lo" fib_rule4_test_match_n_redirect "$match" "$match" "$getnomatch" \ "iif redirect to table" "iif no redirect to table" - ip netns exec $testns sysctl -qw net.ipv4.ip_forward=0 # Reject dsfield (tos) options which have ECN bits set for cnt in $(seq 1 3); do
@@ -431,6 +443,19 @@ fib_rule4_test() "$getnomatch no redirect to table" done + # Re-test TOS matching, but with input routes since they are handled + # differently from output routes. + match="tos 0x10" + for cnt in "0x10" "0x11" "0x12" "0x13"; do + getmatch="tos $cnt" + getnomatch="tos 0x20" + fib_rule4_test_match_n_redirect "$match" \ + "from $SRC_IP iif $DEV $getmatch" \ + "from $SRC_IP iif $DEV $getnomatch" \ + "iif $getmatch redirect to table" \ + "iif $getnomatch no redirect to table" + done + match="fwmark 0x64" getmatch="mark 0x64" getnomatch="mark 0x63"
Signature · 1 line
2.46.0
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 11 lines · On Wed, 14 Aug 2024 14:10:00 +0300 you wrote:
This patchset performs some cleanups and adds new tests in preparation for upcoming FIB rule DSCP selector.
Ido Schimmel (5):
selftests:fib_rule_tests: Remove unused functions
selftests:fib_rule_tests: Clarify test results
selftests:fib_rule_tests: Add negative match tests
selftests:fib_rule_tests: Add negative connect tests
selftests:fib_rule_tests: Test TOS matching with input routes[...]
Here is the summary with links:
- [net-next,1/5] selftests: fib_rule_tests: Remove unused functions
https://git.kernel.org/netdev/net-next/c/30dcdd6a3a6c - [net-next,2/5] selftests: fib_rule_tests: Clarify test results https://git.kernel.org/netdev/net-next/c/b1487d6abeb5 - [net-next,3/5] selftests: fib_rule_tests: Add negative match tests https://git.kernel.org/netdev/net-next/c/9b6dcef32c2d - [net-next,4/5] selftests: fib_rule_tests: Add negative connect tests https://git.kernel.org/netdev/net-next/c/53f88ed85bdd - [net-next,5/5] selftests: fib_rule_tests: Test TOS matching with input routes https://git.kernel.org/netdev/net-next/c/5f1b4f1be2d2
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html