Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
PATCH v2 1/1 Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
Starting a BCM UART controller not defined as a platform device or a serdev with "btattach -B /dev/ttyS1 -P bcm -S 3000000" works fine but the serial port remains at the init_speed, i.e. 115200.
The oper_speed is only set if a device is declared in ACPI, device tree or as a platform device.
This commit copies the serial port speed fixed by hciattach to the oper_speed on line discipline opening.
---
This has been tested with 5.4 kernel only.
Afaict there's no change in this driver which should be impacted by this commit in latest kernel.
v1 -> v2: Move speed copy from hci_bcm driver to hci_ldisc to be
more generic
drivers/bluetooth/hci_ldisc.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/bluetooth/hci_ldisc.c +3 -0
@@ -507,6 +507,9 @@ static int hci_uart_tty_open(struct tty_struct *tty) hu->alignment =1 ; hu->padding =0 ; +/* Use serial port speed as oper_speed */ + hu->oper_speed = tty->termios.c_ospeed; +INIT_WORK (&hu->init_ready, hci_uart_init_work);INIT_WORK (&hu->write_work, hci_uart_write_work);
Signature · 1 line
2.34.1
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Tue, 20 Aug 2024 16:17:16 +0200 you wrote:
Starting a BCM UART controller not defined as a platform device or a serdev with "btattach -B
/dev/ttyS1-P bcm -S 3000000" works fine but the serial port remains at theinit_speed, i.e. 115200.The
oper_speedis only set if a device is declared in ACPI, device tree or as a platform device.[...]
Here is the summary with links:
- [v2] Bluetooth: hci_ldisc: Use speed set by btattach as oper_speed
https://git.kernel.org/bluetooth/bluetooth-next/c/96f44a40e702
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html