autopair: Move handling of wii controllers
Subsystems (2)
Luiz Augusto von Dentz
maintainerPATCH 1/2 autopair: Move handling of wii controllers
From: Luiz Augusto von Dentz <[email protected]>
This moves the pairing handling of wii controllers to autopair plugin.
--- plugins/autopair.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)
plugins/autopair.c +80 -0
@@ -30,6 +30,80 @@#include "src/storage.h" #include "src/shared/util.h" +/* +* Nintendo Wii Remote devices require the bdaddr of the host as pin input for +* authentication. This plugin registers a pin-callback and forces this pin +* to be used for authentication. +* +* There are two ways to place the wiimote into discoverable mode. +* - Pressing the red-sync button on the back of the wiimote. This module +* supports pairing via this method. Auto-reconnect should be possible after +* the device was paired once. +* - Pressing the 1+2 buttons on the front of the wiimote. This module does +* not support this method since this method never enables auto-reconnect. +* Hence, pairing is not needed. Use it without pairing if you want. +* After connecting the wiimote you should immediately connect to the input +* service of the wiimote. If you don't, the wiimote will close the connection. +* The wiimote waits about 5 seconds until it turns off again. +* Auto-reconnect is only enabled when pairing with the wiimote via the red +* sync-button and then connecting to the input service. If you do not connect +* to the input service, then auto-reconnect is not enabled. +* If enabled, the wiimote connects to the host automatically when any button +* is pressed. +*/ + +static uint16_t wii_ids[][2 ] = { + {0x057e ,0x0306 },/* 1st gen */ + {0x054c ,0x0306 },/* LEGO wiimote */ + {0x057e ,0x0330 },/* 2nd gen */ +}; + +static const char *wii_names[] = { +"Nintendo RVL-CNT-01" ,/* 1st gen */ +"Nintendo RVL-CNT-01-TR" ,/* 2nd gen */ +"Nintendo RVL-CNT-01-UC" ,/* Wii U Pro Controller */ +"Nintendo RVL-WBC-01" ,/* Balance Board */ +}; + +static ssize_t wii_pincb (struct btd_adapter *adapter,struct btd_device *device, +char *pinbuf,bool *display, +unsigned int attempt) +{ +uint16_t vendor, product; +char addr[18 ], name[25 ]; +unsigned int i; + +/* Only try the pin code once per device. If it's not correct then it's +* an unknown device. +*/ +if (attempt >1 ) +return 0 ; + +ba2str (device_get_address (device), addr); + + vendor =btd_device_get_vendor (device); + product =btd_device_get_product (device); + +device_get_name (device, name,sizeof (name)); + +for (i =0 ; i <G_N_ELEMENTS (wii_ids); ++i) { +if (vendor == wii_ids[i][0 ] && product == wii_ids[i][1 ]) + goto found; + } + +for (i =0 ; i <G_N_ELEMENTS (wii_names); ++i) { +if (g_str_equal (name, wii_names[i])) + goto found; + } + +return 0 ; + +found: +DBG ("Forcing fixed pin on detected wiimote %s" , addr); +memcpy (pinbuf,btd_adapter_get_address (adapter),6 ); +return 6 ; +} +/* * Plugin to handle automatic pairing of devices with reduced user * interaction, including implementing the recommendation of the HID spec
@@ -51,6 +125,12 @@ static ssize_t autopair_pincb(struct btd_adapter *adapter,char name[25 ];uint32_t class;uint32_t val; +ssize_t ret; + +/* Try with the wii_pincb first */ + ret =wii_pincb (adapter, device, pinbuf, display, attempt); +if (ret >0 ) +return ret;ba2str (device_get_address (device), addr);
Signature · 1 line
2.47.1
Luiz Augusto von Dentz
maintainerPATCH 2/2 build: Remove wiimote plugin
From: Luiz Augusto von Dentz <[email protected]>
--- Makefile.plugins | 3 -- plugins/wiimote.c | 130 ---------------------------------------------- 2 files changed, 133 deletions(-) delete mode 100644 plugins/wiimote.c
Makefile.plugins +0 -3
@@ -2,9 +2,6 @@ builtin_modules += hostname builtin_sources += plugins/hostname.c -builtin_modules += wiimote -builtin_sources += plugins/wiimote.c - builtin_modules += autopair builtin_sources += plugins/autopair.c
plugins/wiimote.c deleted +0 -130
130 lines not on this page · raw message
Signature · 1 line
2.47.1
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=923027
---Test result---
Test Summary:
CheckPatch PENDING 0.27 seconds GitLint PENDING 0.26 seconds BuildEll PASS 20.54 seconds BluezMake PASS 1567.06 seconds MakeCheck PASS 13.16 seconds MakeDistcheck PASS 159.22 seconds CheckValgrind PASS 217.42 seconds CheckSmatch PASS 273.27 seconds bluezmakeextell PASS 98.73 seconds IncrementalBuild PENDING 0.36 seconds ScanBuild PASS 844.21 seconds
Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:
##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:
---
Regards,
Linux Bluetooth
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 8 lines · On Tue, 7 Jan 2025 10:42:07 -0500 you wrote:
From: Luiz Augusto von Dentz <[email protected]>
This moves the pairing handling of wii controllers to autopair plugin.
--- plugins/autopair.c | 80 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+)
Here is the summary with links:
- [BlueZ,v1,1/2] autopair: Move handling of wii controllers
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=c281bc460884 - [BlueZ,v1,2/2] build: Remove wiimote plugin https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=7679c96954ec
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html