Skip to contentSkip to conversation

obex: unregster profiles when the user is inactive

PATCH Superseded Andrew Sayers 4 participants 8 messages Apr 23, 2025 – May 1, 2025

Subsystems (2)

v1 of 6 Superseded Latest is v6 →

lore
Share & tools
lore
#0 lore raw

cover obex: unregster profiles when the user is inactive

This is a follow-up to "obexd: only run one instance at once". Instead of refusing to run parallel services, it unregisters profiles when the user is inactive. This avoids the need for tmpfiles, and avoids issues where the user with the obex service logs out, leaving obex disabled altogether.

Luiz previously suggested moving this to systemd, but I haven't had much luck getting the systemd devs to accept changes, and Pauli's mention of elogind (i.e. logind without systemd) suggests it's probably better to avoid the dependency anyway.

I considered writing a separate D-Bus service that would notify you when the session became (in)active, but D-Bus doesn't have particularly strong guarantees about how long messages take to deliver, which could lead to race conditions between instances on overloaded systems.

I also considered writing some kind of library, but there's not much code to deduplicate, and most of it would need to be reworked for every service that uses it. So I wrote a gist for people to copy/paste:

https://gist.github.com/andrew-sayers/1c4a24f86a9a4c1b1e38d109f1bd1d1e

---

Andrew Sayers (4):
pbap: Support calling pbap_init() after pbap_exit() obexd/bluetooth: Support calling bluetooth_init() after bluetooth_exit()
obex: unregster profiles when the user is inactive
Revert "obexd: only run one instance at once"

 Makefile.obexd            |  10 ++
 obexd/client/pbap.c       |  34 ++++++-
 obexd/plugins/bluetooth.c |  44 ++++++++-
 obexd/src/logind.c        | 238 ++++++++++++++++++++++++++++++++++++++++++++++
 obexd/src/logind.h        |  26 +++++
 obexd/src/main.c          |   4 +
 obexd/src/obex.service.in |   9 --
 7 files changed, 350 insertions(+), 15 deletions(-)
#1 lore raw

PATCH 1/4 pbap: Support calling pbap_init() after pbap_exit()

pbap_exit() didn't previously unregister itself thoroughly. That was fine if it was only called when the service was about to exit, because everything was implicitly unregistered when the process ended. But we need to be more scrupulous if this can be called throughout the program's lifecycle.

Send the UnregisterProfile message directly from pbap_exit(), then call unregister_profile().

The UnregisterProfile message can't be sent directly from unregister_profile(), because that also needs to be called when register_profile() fails halfway through.

---
 obexd/client/pbap.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
obexd/client/pbap.c +20 -0
index 2f234fadf..e2a3c1b90 100644
@@ -1483,8 +1483,28 @@ int pbap_init(void)
 
 void pbap_exit(void)
 {
+	DBusMessage *msg;
+	DBusMessageIter iter;
+	char *uuid = PBAP_CLIENT_UUID;
+
 	DBG("");
 
+	client_path = g_strconcat("/org/bluez/obex/", uuid, NULL);
+	g_strdelimit(client_path, "-", '_');
+
+	msg = dbus_message_new_method_call("org.bluez", "/org/bluez",
+						"org.bluez.ProfileManager1",
+						"UnregisterProfile");
+
+	dbus_message_iter_init_append(msg, &iter);
+
+	dbus_message_iter_append_basic(&iter, DBUS_TYPE_OBJECT_PATH,
+							&client_path);
+
+	g_dbus_send_message(system_conn, msg);
+
+	unregister_profile();
+
 	dbus_connection_unref(conn);
 	conn = NULL;
 
Signature · 1 line
2.49.0
#2 lore raw

Re: [PATCH BlueZ 1/4] pbap: Support calling pbap_init() after pbap_exit()

ke, 2025-04-23 kello 17:33 +0100, Andrew Sayers kirjoitti:

Quoted 28 lines

pbap_exit() didn't previously unregister itself thoroughly. That was fine if it was only called when the service was about to exit, because everything was implicitly unregistered when the process ended. But we need to be more scrupulous if this can be called throughout the program's lifecycle.

Send the UnregisterProfile message directly from pbap_exit(), then call unregister_profile().

The UnregisterProfile message can't be sent directly from unregister_profile(), because that also needs to be called when register_profile() fails halfway through.

---
 obexd/client/pbap.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
obexd/client/pbap.c +2 -0
index 2f234fadf..e2a3c1b90 100644
@@ -1483,8 +1483,28 @@ int pbap_init(void)
 
 void pbap_exit(void)
 {
+	DBusMessage *msg;
+	DBusMessageIter iter;

obexd/client/pbap.c int pbap_init(void) · line 1497

Quoted 10 lines
obexd/client/pbap.c +8 -0
+	char *uuid = PBAP_CLIENT_UUID;
+
 	DBG("");
 
+	client_path = g_strconcat("/org/bluez/obex/", uuid, NULL);
+	g_strdelimit(client_path, "-", '_');
+
+	msg = dbus_message_new_method_call("org.bluez", "/org/bluez",
+						"org.bluez.ProfileManager1",
+						"UnregisterProfile");

It was observed in Pipewire that calling UnregisterProfile on exit may result to long delays on system shutdown, where bluetoothd may be shutting down at the same time.

IIRC bluetoothd unregisters the profile automatically if you shutdown the DBus connection, which may be a faster way to teardown.

Quoted 13 lines
obexd/client/pbap.c +10 -0
+
+	dbus_message_iter_init_append(msg, &iter);
+
+	dbus_message_iter_append_basic(&iter, DBUS_TYPE_OBJECT_PATH,
+							&client_path);
+
+	g_dbus_send_message(system_conn, msg);
+
+	unregister_profile();
+
 	dbus_connection_unref(conn);
 	conn = NULL;
 
Signature · 1 line
Pauli Virtanen
#3 lore raw
In reply to Andrew Sayers

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=956257

---Test result---

Test Summary:

CheckPatch                    PENDING   0.25 seconds
GitLint                       PENDING   0.27 seconds
BuildEll                      PASS      20.66 seconds
BluezMake                     FAIL      2742.81 seconds
MakeCheck                     FAIL      23.32 seconds
MakeDistcheck                 PASS      207.56 seconds
CheckValgrind                 FAIL      202.10 seconds
CheckSmatch                   FAIL      309.28 seconds
bluezmakeextell               FAIL      126.12 seconds
IncrementalBuild              PENDING   0.29 seconds
ScanBuild                     FAIL      448.24 seconds

Details
##############################
Test: CheckPatch - PENDING
Desc: Run checkpatch.pl script
Output:

##############################
Test: GitLint - PENDING
Desc: Run gitlint
Output:

##############################
Test: BluezMake - FAIL
Desc: Build BlueZ
Output:

tools/mgmt-tester.c: In function ‘main’:
tools/mgmt-tester.c:12907:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without 12907 | int main(int argc, char *argv[])

      |     ^~~~
unit/test-avdtp.c: In function ‘main’:
unit/test-avdtp.c:766:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without
  766 | int main(int argc, char *argv[])
      |     ^~~~
unit/test-avrcp.c: In function ‘main’:
unit/test-avrcp.c:989:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without
  989 | int main(int argc, char *argv[])
      |     ^~~~
obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]
  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4690: all] Error 2
##############################
Test: MakeCheck - FAIL
Desc: Run Bluez Make Check
Output:

obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]

  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1
make: *** [Makefile:12345: check] Error 2
##############################
Test: CheckValgrind - FAIL
Desc: Run Bluez Make Check with Valgrind
Output:

tools/mgmt-tester.c: In function ‘main’:
tools/mgmt-tester.c:12907:5: note: variable tracking size limit exceeded with ‘-fvar-tracking-assignments’, retrying without 12907 | int main(int argc, char *argv[])

      |     ^~~~
obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]
  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:12345: check] Error 2
##############################
Test: CheckSmatch - FAIL
Desc: Run smatch tool with source
Output:

src/shared/crypto.c:271:21: warning: Variable length array is used. src/shared/crypto.c:272:23: warning: Variable length array is used. src/shared/gatt-helpers.c:768:31: warning: Variable length array is used. src/shared/gatt-helpers.c:830:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1323:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1354:23: warning: Variable length array is used. src/shared/gatt-server.c:278:25: warning: Variable length array is used. src/shared/gatt-server.c:618:25: warning: Variable length array is used. src/shared/gatt-server.c:716:25: warning: Variable length array is used. src/shared/bap.c:315:25: warning: array of flexible structures
src/shared/bap.c: note: in included file:
./src/shared/ascs.h:88:25: warning: array of flexible structures
src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' src/shared/crypto.c:271:21: warning: Variable length array is used. src/shared/crypto.c:272:23: warning: Variable length array is used. src/shared/gatt-helpers.c:768:31: warning: Variable length array is used. src/shared/gatt-helpers.c:830:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1323:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1354:23: warning: Variable length array is used. src/shared/gatt-server.c:278:25: warning: Variable length array is used. src/shared/gatt-server.c:618:25: warning: Variable length array is used. src/shared/gatt-server.c:716:25: warning: Variable length array is used. src/shared/bap.c:315:25: warning: array of flexible structures
src/shared/bap.c: note: in included file:
./src/shared/ascs.h:88:25: warning: array of flexible structures
src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' tools/mesh-cfgtest.c:1453:17: warning: unknown escape sequence: '\%'
tools/sco-tester.c: note: in included file:
./lib/bluetooth.h:232:15: warning: array of flexible structures
./lib/bluetooth.h:237:31: warning: array of flexible structures
tools/bneptest.c:634:39: warning: unknown escape sequence: '\%'
tools/seq2bseq.c:57:26: warning: Variable length array is used.
tools/obex-client-tool.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' android/avctp.c:505:34: warning: Variable length array is used.
android/avctp.c:556:34: warning: Variable length array is used.
unit/test-avrcp.c:373:26: warning: Variable length array is used. unit/test-avrcp.c:398:26: warning: Variable length array is used. unit/test-avrcp.c:414:24: warning: Variable length array is used. android/avrcp-lib.c:1085:34: warning: Variable length array is used. android/avrcp-lib.c:1583:34: warning: Variable length array is used. android/avrcp-lib.c:1612:34: warning: Variable length array is used. android/avrcp-lib.c:1638:34: warning: Variable length array is used. mesh/mesh-io-mgmt.c:524:67: warning: Variable length array is used.
client/display.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' src/shared/crypto.c:271:21: warning: Variable length array is used. src/shared/crypto.c:272:23: warning: Variable length array is used. src/shared/gatt-helpers.c:768:31: warning: Variable length array is used. src/shared/gatt-helpers.c:830:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1323:31: warning: Variable length array is used. src/shared/gatt-helpers.c:1354:23: warning: Variable length array is used. src/shared/gatt-server.c:278:25: warning: Variable length array is used. src/shared/gatt-server.c:618:25: warning: Variable length array is used. src/shared/gatt-server.c:716:25: warning: Variable length array is used. src/shared/bap.c:315:25: warning: array of flexible structures
src/shared/bap.c: note: in included file:
./src/shared/ascs.h:88:25: warning: array of flexible structures
src/shared/shell.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' monitor/packet.c: note: in included file:
monitor/display.h:82:26: warning: Variable length array is used. monitor/packet.c:1876:26: warning: Variable length array is used.
monitor/packet.c: note: in included file:
monitor/bt.h:3607:52: warning: array of flexible structures
monitor/bt.h:3595:40: warning: array of flexible structures
monitor/l2cap.c: note: in included file:
monitor/display.h:82:26: warning: Variable length array is used.
monitor/msft.c: note: in included file:
monitor/msft.h:88:44: warning: array of flexible structures
monitor/att.c: note: in included file:
monitor/display.h:82:26: warning: Variable length array is used.
tools/rctest.c:627:33: warning: non-ANSI function declaration of function 'automated_send_recv' tools/hex2hcd.c:136:26: warning: Variable length array is used.
tools/meshctl.c:324:33: warning: non-ANSI function declaration of function 'forget_mesh_devices' tools/mesh-gatt/node.c:456:39: warning: non-ANSI function declaration of function 'node_get_local_node' tools/mesh-gatt/net.c:1239:30: warning: non-ANSI function declaration of function 'get_next_seq' tools/mesh-gatt/net.c:2193:29: warning: non-ANSI function declaration of function 'net_get_default_ttl' tools/mesh-gatt/net.c:2207:26: warning: non-ANSI function declaration of function 'net_get_seq_num' tools/mesh-gatt/prov.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' tools/mesh-gatt/onoff-model.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' ell/log.c:431:65: warning: non-ANSI function declaration of function 'register_debug_section' ell/log.c:439:68: warning: non-ANSI function declaration of function 'free_debug_sections' ell/random.c:60:42: warning: non-ANSI function declaration of function 'l_getrandom_is_supported' ell/cipher.c:660:28: warning: non-ANSI function declaration of function 'init_supported' ell/checksum.c:382:28: warning: non-ANSI function declaration of function 'init_supported' ell/checksum.c:444:47: warning: non-ANSI function declaration of function 'l_checksum_cmac_aes_supported' ell/cipher.c:519:24: warning: Variable length array is used.
ell/cert-crypto.c:36:33: warning: Variable length array is used. ell/cert-crypto.c:142:36: warning: Variable length array is used. ell/cert-crypto.c:198:36: warning: Variable length array is used. ell/cert-crypto.c:251:31: warning: Variable length array is used.
ell/key.c:550:25: warning: Variable length array is used.
ell/dbus-service.c:548:49: warning: non-ANSI function declaration of function '_dbus_object_tree_new' ell/dbus-filter.c:232:46: warning: Variable length array is used.
ell/tls.c:45:25: warning: Variable length array is used.
ell/tls.c:86:22: warning: Variable length array is used.
ell/tls.c:86:46: warning: Variable length array is used.
ell/tls-suites.c:1078:25: warning: Variable length array is used. ell/tls-suites.c:1080:34: warning: Variable length array is used. ell/tls-suites.c:1083:41: warning: Variable length array is used. ell/tls-suites.c:1132:41: warning: Variable length array is used.
ell/tls.c:1819:26: warning: Variable length array is used.
emulator/btdev.c:453:29: warning: Variable length array is used. emulator/bthost.c:628:28: warning: Variable length array is used. emulator/bthost.c:826:28: warning: Variable length array is used. attrib/gatttool.c:235:23: warning: Variable length array is used.
attrib/interactive.c: note: in included file (through /usr/include/readline/readline.h):
/usr/include/readline/rltypedefs.h:35:23: warning: non-ANSI function declaration of function 'Function' /usr/include/readline/rltypedefs.h:36:25: warning: non-ANSI function declaration of function 'VFunction' /usr/include/readline/rltypedefs.h:37:27: warning: non-ANSI function declaration of function 'CPFunction' /usr/include/readline/rltypedefs.h:38:29: warning: non-ANSI function declaration of function 'CPPFunction' attrib/interactive.c:174:27: warning: non-ANSI function declaration of function 'disconnect_io' attrib/interactive.c:299:23: warning: Variable length array is used. profiles/sap/server.c: note: in included file:
profiles/sap/sap.h:77:35: warning: array of flexible structures
obexd/src/logind.c:51:19: warning: non-ANSI function declaration of function 'update' obexd/src/logind.c:123:24: warning: non-ANSI function declaration of function 'logind_init' obexd/src/logind.c:180:25: warning: non-ANSI function declaration of function 'logind_exit' obexd/src/logind.c:203:9: warning: mixing declarations and code
obexd/src/logind.c:215:9: warning: mixing declarations and code
obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]

  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4690: all] Error 2
##############################
Test: bluezmakeextell - FAIL
Desc: Build Bluez with External ELL
Output:

obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]

  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1 make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:4690: all] Error 2
##############################
Test: IncrementalBuild - PENDING
Desc: Incremental build with the patches in the series Output:

##############################
Test: ScanBuild - FAIL
Desc: Run Scan Build
Output:

src/shared/gatt-client.c:451:21: warning: Use of memory after it is freed

        gatt_db_unregister(op->client->db, op->db_id);
                           ^~~~~~~~~~
src/shared/gatt-client.c:696:2: warning: Use of memory after it is freed
        discovery_op_complete(op, false, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:996:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1102:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1296:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1361:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1636:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1641:2: warning: Use of memory after it is freed
        discover_all(op);
        ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2147:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2155:8: warning: Use of memory after it is freed
                                                        discovery_op_ref(op),
                                                        ^~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3244:2: warning: Use of memory after it is freed
        complete_write_long_op(req, success, 0, false);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3266:2: warning: Use of memory after it is freed
        request_unref(req);
        ^~~~~~~~~~~~~~~~~~
12 warnings generated.
src/shared/bap.c:1495:8: warning: Use of memory after it is freed
        bap = bt_bap_ref_safe(bap);
              ^~~~~~~~~~~~~~~~~~~~
src/shared/bap.c:2245:20: warning: Use of memory after it is freed
        return queue_find(stream->bap->streams, NULL, stream);
                          ^~~~~~~~~~~~~~~~~~~~
2 warnings generated.
src/shared/gatt-client.c:451:21: warning: Use of memory after it is freed
        gatt_db_unregister(op->client->db, op->db_id);
                           ^~~~~~~~~~
src/shared/gatt-client.c:696:2: warning: Use of memory after it is freed
        discovery_op_complete(op, false, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:996:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1102:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1296:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1361:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1636:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1641:2: warning: Use of memory after it is freed
        discover_all(op);
        ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2147:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2155:8: warning: Use of memory after it is freed
                                                        discovery_op_ref(op),
                                                        ^~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3244:2: warning: Use of memory after it is freed
        complete_write_long_op(req, success, 0, false);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3266:2: warning: Use of memory after it is freed
        request_unref(req);
        ^~~~~~~~~~~~~~~~~~
12 warnings generated.
tools/hciattach.c:817:7: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
        if ((n = read_hci_event(fd, resp, 10)) < 0) {
             ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/hciattach.c:865:7: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
        if ((n = read_hci_event(fd, resp, 4)) < 0) {
             ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/hciattach.c:887:8: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
                if ((n = read_hci_event(fd, resp, 10)) < 0) {
                     ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/hciattach.c:909:7: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
        if ((n = read_hci_event(fd, resp, 4)) < 0) {
             ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/hciattach.c:930:7: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
        if ((n = read_hci_event(fd, resp, 4)) < 0) {
             ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/hciattach.c:974:7: warning: Although the value stored to 'n' is used in the enclosing expression, the value is never actually read from 'n'
        if ((n = read_hci_event(fd, resp, 6)) < 0) {
             ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~
6 warnings generated.
src/shared/bap.c:1495:8: warning: Use of memory after it is freed
        bap = bt_bap_ref_safe(bap);
              ^~~~~~~~~~~~~~~~~~~~
src/shared/bap.c:2245:20: warning: Use of memory after it is freed
        return queue_find(stream->bap->streams, NULL, stream);
                          ^~~~~~~~~~~~~~~~~~~~
2 warnings generated.
src/oui.c:50:2: warning: Value stored to 'hwdb' is never read
        hwdb = udev_hwdb_unref(hwdb);
        ^      ~~~~~~~~~~~~~~~~~~~~~
src/oui.c:53:2: warning: Value stored to 'udev' is never read
        udev = udev_unref(udev);
        ^      ~~~~~~~~~~~~~~~~
2 warnings generated.
tools/rfcomm.c:234:3: warning: Value stored to 'i' is never read
                i = execvp(cmdargv[0], cmdargv);
                ^   ~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/rfcomm.c:234:7: warning: Null pointer passed to 1st parameter expecting 'nonnull'
                i = execvp(cmdargv[0], cmdargv);
                    ^~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/rfcomm.c:354:8: warning: Although the value stored to 'fd' is used in the enclosing expression, the value is never actually read from 'fd'
                if ((fd = open(devname, O_RDONLY | O_NOCTTY)) < 0) {
                     ^    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/rfcomm.c:497:14: warning: Assigned value is garbage or undefined
        req.channel = raddr.rc_channel;
                    ^ ~~~~~~~~~~~~~~~~
tools/rfcomm.c:515:8: warning: Although the value stored to 'fd' is used in the enclosing expression, the value is never actually read from 'fd'
                if ((fd = open(devname, O_RDONLY | O_NOCTTY)) < 0) {
                     ^    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
5 warnings generated.
tools/hcidump.c:180:9: warning: Potential leak of memory pointed to by 'dp'
                                if (fds[i].fd == sock)
                                    ^~~
tools/hcidump.c:248:17: warning: Assigned value is garbage or undefined
                                dh->ts_sec  = htobl(frm.ts.tv_sec);
                                            ^ ~~~~~~~~~~~~~~~~~~~~
tools/hcidump.c:326:9: warning: 1st function call argument is an uninitialized value
                                if (be32toh(dp.flags) & 0x02) {
                                    ^~~~~~~~~~~~~~~~~
/usr/include/endian.h:46:22: note: expanded from macro 'be32toh'
#  define be32toh(x) __bswap_32 (x)
                     ^~~~~~~~~~~~~~
tools/hcidump.c:341:20: warning: 1st function call argument is an uninitialized value
                                frm.data_len = be32toh(dp.len);
                                               ^~~~~~~~~~~~~~~
/usr/include/endian.h:46:22: note: expanded from macro 'be32toh'
#  define be32toh(x) __bswap_32 (x)
                     ^~~~~~~~~~~~~~
tools/hcidump.c:346:14: warning: 1st function call argument is an uninitialized value
                                opcode = be32toh(dp.flags) & 0xffff;
                                         ^~~~~~~~~~~~~~~~~
/usr/include/endian.h:46:22: note: expanded from macro 'be32toh'
#  define be32toh(x) __bswap_32 (x)
                     ^~~~~~~~~~~~~~
tools/hcidump.c:384:17: warning: Assigned value is garbage or undefined
                        frm.data_len = btohs(dh.len);
                                     ^ ~~~~~~~~~~~~~
tools/hcidump.c:394:11: warning: Assigned value is garbage or undefined
                frm.len = frm.data_len;
                        ^ ~~~~~~~~~~~~
tools/hcidump.c:398:9: warning: 1st function call argument is an uninitialized value
                        ts = be64toh(ph.ts);
                             ^~~~~~~~~~~~~~
/usr/include/endian.h:51:22: note: expanded from macro 'be64toh'
#  define be64toh(x) __bswap_64 (x)
                     ^~~~~~~~~~~~~~
tools/hcidump.c:403:13: warning: 1st function call argument is an uninitialized value
                        frm.in = be32toh(dp.flags) & 0x01;
                                 ^~~~~~~~~~~~~~~~~
/usr/include/endian.h:46:22: note: expanded from macro 'be32toh'
#  define be32toh(x) __bswap_32 (x)
                     ^~~~~~~~~~~~~~
tools/hcidump.c:408:11: warning: Assigned value is garbage or undefined
                        frm.in = dh.in;
                               ^ ~~~~~
tools/hcidump.c:437:7: warning: Null pointer passed to 1st parameter expecting 'nonnull'
        fd = open(file, open_flags, 0644);
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
11 warnings generated.
tools/ciptool.c:350:7: warning: 5th function call argument is an uninitialized value
        sk = do_connect(ctl, dev_id, &src, &dst, psm, (1 << CMTP_LOOPBACK));
             ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
src/sdp-xml.c:126:10: warning: Assigned value is garbage or undefined
                buf[1] = data[i + 1];
                       ^ ~~~~~~~~~~~
src/sdp-xml.c:300:11: warning: Assigned value is garbage or undefined
                        buf[1] = data[i + 1];
                               ^ ~~~~~~~~~~~
src/sdp-xml.c:338:11: warning: Assigned value is garbage or undefined
                        buf[1] = data[i + 1];
                               ^ ~~~~~~~~~~~
3 warnings generated.
tools/sdptool.c:941:26: warning: Result of 'malloc' is converted to a pointer of type 'uint32_t', which is incompatible with sizeof operand type 'int'
                        uint32_t *value_int = malloc(sizeof(int));
                        ~~~~~~~~~~            ^~~~~~ ~~~~~~~~~~~
tools/sdptool.c:980:4: warning: 1st function call argument is an uninitialized value
                        free(allocArray[i]);
                        ^~~~~~~~~~~~~~~~~~~
tools/sdptool.c:3777:2: warning: Potential leak of memory pointed to by 'si.name'
        return add_service(0, &si);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~
tools/sdptool.c:4112:4: warning: Potential leak of memory pointed to by 'context.svc'
                        return -1;
                        ^~~~~~~~~
4 warnings generated.
tools/avtest.c:243:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 3);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:253:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 4);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:262:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 3);
                                ^     ~~~~~~~~~~~~~~~~~

tools/avtest.c:276:5: warning: Value stored to 'len' is never read
len = write(sk, buf,
^ ~~~~~~~~~~~~~~
tools/avtest.c:283:5: warning: Value stored to 'len' is never read
len = write(sk, buf,
^ ~~~~~~~~~~~~~~
tools/avtest.c:290:5: warning: Value stored to 'len' is never read
len = write(sk, buf,
^ ~~~~~~~~~~~~~~
tools/avtest.c:297:5: warning: Value stored to 'len' is never read
len = write(sk, buf,
^ ~~~~~~~~~~~~~~
tools/avtest.c:309:5: warning: Value stored to 'len' is never read

                                len = write(sk, buf, 4);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:313:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:322:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 3);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:326:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:335:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 3);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:342:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:364:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 4);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:368:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:377:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 3);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:381:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:394:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 4);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:398:5: warning: Value stored to 'len' is never read
                                len = write(sk, buf, 2);
                                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:405:4: warning: Value stored to 'len' is never read
                        len = write(sk, buf, 2);
                        ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:415:4: warning: Value stored to 'len' is never read
                        len = write(sk, buf, 2);
                        ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:580:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 2);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:588:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, invalid ? 2 : 3);
                ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/avtest.c:602:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 4 + media_transport_size);
                ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/avtest.c:615:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:625:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:637:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:652:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:664:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:673:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 3);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:680:3: warning: Value stored to 'len' is never read
                len = write(sk, buf, 2);
                ^     ~~~~~~~~~~~~~~~~~
tools/avtest.c:716:2: warning: Value stored to 'len' is never read
        len = write(sk, buf, AVCTP_HEADER_LENGTH + sizeof(play_pressed));
        ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
32 warnings generated.
tools/btproxy.c:836:15: warning: Null pointer passed to 1st parameter expecting 'nonnull'
                        tcp_port = atoi(optarg);
                                   ^~~~~~~~~~~~
tools/btproxy.c:839:8: warning: Null pointer passed to 1st parameter expecting 'nonnull'
                        if (strlen(optarg) > 3 && !strncmp(optarg, "hci", 3))
                            ^~~~~~~~~~~~~~
2 warnings generated.
tools/create-image.c:76:3: warning: Value stored to 'fd' is never read
                fd = -1;
                ^    ~~
tools/create-image.c:84:3: warning: Value stored to 'fd' is never read
                fd = -1;
                ^    ~~
tools/create-image.c:92:3: warning: Value stored to 'fd' is never read
                fd = -1;
                ^    ~~
tools/create-image.c:105:2: warning: Value stored to 'fd' is never read
        fd = -1;
        ^    ~~
4 warnings generated.
tools/check-selftest.c:42:3: warning: Value stored to 'ptr' is never read
                ptr = fgets(result, sizeof(result), fp);
                ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
tools/gatt-service.c:294:2: warning: 2nd function call argument is an uninitialized value
        chr_write(chr, value, len);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
tools/btgatt-client.c:1824:2: warning: Value stored to 'argv' is never read
        argv += optind;
        ^       ~~~~~~
1 warning generated.
tools/btgatt-server.c:1212:2: warning: Value stored to 'argv' is never read
        argv -= optind;
        ^       ~~~~~~
1 warning generated.
tools/obex-server-tool.c:133:13: warning: Null pointer passed to 1st parameter expecting 'nonnull'
        data->fd = open(name, O_WRONLY | O_CREAT | O_NOCTTY, 0600);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/obex-server-tool.c:192:13: warning: Null pointer passed to 1st parameter expecting 'nonnull'
        data->fd = open(name, O_RDONLY | O_NOCTTY, 0);
                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
tools/btpclientctl.c:402:3: warning: Value stored to 'bit' is never read
                bit = 0;
                ^     ~
tools/btpclientctl.c:1655:2: warning: Null pointer passed to 2nd parameter expecting 'nonnull'
        memcpy(cp->data, ad_data, ad_len);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
src/sdpd-request.c:211:13: warning: Result of 'malloc' is converted to a pointer of type 'char', which is incompatible with sizeof operand type 'uint16_t'
                                pElem = malloc(sizeof(uint16_t));
                                        ^~~~~~ ~~~~~~~~~~~~~~~~
src/sdpd-request.c:239:13: warning: Result of 'malloc' is converted to a pointer of type 'char', which is incompatible with sizeof operand type 'uint32_t'
                                pElem = malloc(sizeof(uint32_t));
                                        ^~~~~~ ~~~~~~~~~~~~~~~~
2 warnings generated.
android/avrcp-lib.c:1968:3: warning: 1st function call argument is an uninitialized value
                g_free(text[i]);
                ^~~~~~~~~~~~~~~
1 warning generated.
profiles/audio/avdtp.c:896:25: warning: Use of memory after it is freed
                session->prio_queue = g_slist_remove(session->prio_queue, req);
                                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
profiles/audio/avdtp.c:903:24: warning: Use of memory after it is freed
                session->req_queue = g_slist_remove(session->req_queue, req);
                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
profiles/audio/a2dp.c:371:8: warning: Use of memory after it is freed
                if (!cb->resume_cb)
                     ^~~~~~~~~~~~~
1 warning generated.
profiles/audio/avrcp.c:1961:2: warning: Value stored to 'operands' is never read
        operands += sizeof(*pdu);
        ^           ~~~~~~~~~~~~
1 warning generated.
profiles/health/hdp.c:644:3: warning: Use of memory after it is freed
                hdp_tmp_dc_data_unref(dc_data);
                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
profiles/health/hdp.c:800:19: warning: Use of memory after it is freed
                path = g_strdup(chan->path);
                                ^~~~~~~~~~
profiles/health/hdp.c:1779:6: warning: Use of memory after it is freed
                                        hdp_tmp_dc_data_ref(hdp_conn),
                                        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
profiles/health/hdp.c:1836:30: warning: Use of memory after it is freed
        reply = g_dbus_create_error(data->msg, ERROR_INTERFACE ".HealthError",
                                    ^~~~~~~~~
4 warnings generated.
profiles/health/hdp_util.c:1052:2: warning: Use of memory after it is freed
        conn_data->func(conn_data->data, gerr);
        ^~~~~~~~~~~~~~~
1 warning generated.
attrib/gatt.c:970:2: warning: Potential leak of memory pointed to by 'long_write'
        return prepare_write(long_write);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
src/sdpd-request.c:211:13: warning: Result of 'malloc' is converted to a pointer of type 'char', which is incompatible with sizeof operand type 'uint16_t'
                                pElem = malloc(sizeof(uint16_t));
                                        ^~~~~~ ~~~~~~~~~~~~~~~~
src/sdpd-request.c:239:13: warning: Result of 'malloc' is converted to a pointer of type 'char', which is incompatible with sizeof operand type 'uint32_t'
                                pElem = malloc(sizeof(uint32_t));
                                        ^~~~~~ ~~~~~~~~~~~~~~~~
2 warnings generated.
src/sdp-client.c:353:14: warning: Access to field 'cb' results in a dereference of a null pointer
        (*ctxt)->cb = cb;
        ~~~~~~~~~~~~^~~~
1 warning generated.
src/sdp-xml.c:126:10: warning: Assigned value is garbage or undefined
                buf[1] = data[i + 1];
                       ^ ~~~~~~~~~~~
src/sdp-xml.c:300:11: warning: Assigned value is garbage or undefined
                        buf[1] = data[i + 1];
                               ^ ~~~~~~~~~~~
src/sdp-xml.c:338:11: warning: Assigned value is garbage or undefined
                        buf[1] = data[i + 1];
                               ^ ~~~~~~~~~~~
3 warnings generated.
src/gatt-database.c:1173:10: warning: Value stored to 'bits' during its initialization is never read
        uint8_t bits[] = { BT_GATT_CHRC_CLI_FEAT_ROBUST_CACHING,
                ^~~~     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
gobex/gobex-header.c:95:2: warning: Null pointer passed to 2nd parameter expecting 'nonnull'
        memcpy(to, from, count);
        ^~~~~~~~~~~~~~~~~~~~~~~

1 warning generated.
gobex/gobex-transfer.c:423:7: warning: Use of memory after it is freed
if (!g_slist_find(transfers, transfer))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
mesh/main.c:162:3: warning: Value stored to 'optarg' is never read

                optarg += strlen("auto");
                ^         ~~~~~~~~~~~~~~
1 warning generated.
lib/hci.c:97:4: warning: Value stored to 'ptr' is never read
                        ptr += sprintf(ptr, "%s", m->str);
                        ^      ~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
client/player.c:2219:8: warning: Null pointer passed to 2nd parameter expecting 'nonnull'
                if (!strcmp(ep->path, pattern))
                     ^~~~~~~~~~~~~~~~~~~~~~~~~
client/player.c:3489:16: warning: Null pointer passed to 1st parameter expecting 'nonnull'
        codec->name = strdup(name);
                      ^~~~~~~~~~~~
2 warnings generated.
gdbus/watch.c:226:3: warning: Attempt to free released memory
                g_free(l->data);
                ^~~~~~~~~~~~~~~
1 warning generated.
lib/sdp.c:509:17: warning: Dereference of undefined pointer value
                uint8_t dtd = *(uint8_t *) dtds[i];
                              ^~~~~~~~~~~~~~~~~~~~
lib/sdp.c:539:17: warning: Dereference of undefined pointer value
                uint8_t dtd = *(uint8_t *) dtds[i];
                              ^~~~~~~~~~~~~~~~~~~~
lib/sdp.c:1885:26: warning: Potential leak of memory pointed to by 'ap'
        for (; pdlist; pdlist = pdlist->next) {
                                ^~~~~~
lib/sdp.c:1899:6: warning: Potential leak of memory pointed to by 'pds'
                ap = sdp_list_append(ap, pds);
                ~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
lib/sdp.c:1944:10: warning: Potential leak of memory pointed to by 'u'
                        *seqp = sdp_list_append(*seqp, u);
                        ~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/sdp.c:2049:4: warning: Potential leak of memory pointed to by 'lang'
                        sdp_list_free(*langSeq, free);
                        ^~~~~~~~~~~~~
lib/sdp.c:2138:9: warning: Potential leak of memory pointed to by 'profDesc'
        return 0;
               ^
lib/sdp.c:3270:8: warning: Potential leak of memory pointed to by 'pSvcRec'
                pSeq = sdp_list_append(pSeq, pSvcRec);
                ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lib/sdp.c:3271:9: warning: Potential leak of memory pointed to by 'pSeq'
                pdata += sizeof(uint32_t);
                ~~~~~~^~~~~~~~~~~~~~~~~~~
lib/sdp.c:4607:13: warning: Potential leak of memory pointed to by 'rec_list'
                        } while (scanned < attr_list_len && pdata_len > 0);
                                 ^~~~~~~
lib/sdp.c:4903:40: warning: Potential leak of memory pointed to by 'tseq'
        for (d = sdpdata->val.dataseq; d; d = d->next) {
                                              ^
lib/sdp.c:4939:8: warning: Potential leak of memory pointed to by 'subseq'
                tseq = sdp_list_append(tseq, subseq);
                ~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
12 warnings generated.
src/shared/gatt-client.c:451:21: warning: Use of memory after it is freed
        gatt_db_unregister(op->client->db, op->db_id);
                           ^~~~~~~~~~
src/shared/gatt-client.c:696:2: warning: Use of memory after it is freed
        discovery_op_complete(op, false, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:996:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1102:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1296:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1361:2: warning: Use of memory after it is freed
        discovery_op_complete(op, success, att_ecode);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1636:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:1641:2: warning: Use of memory after it is freed
        discover_all(op);
        ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2147:6: warning: Use of memory after it is freed
        if (read_db_hash(op)) {
            ^~~~~~~~~~~~~~~~
src/shared/gatt-client.c:2155:8: warning: Use of memory after it is freed
                                                        discovery_op_ref(op),
                                                        ^~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3244:2: warning: Use of memory after it is freed
        complete_write_long_op(req, success, 0, false);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
src/shared/gatt-client.c:3266:2: warning: Use of memory after it is freed
        request_unref(req);
        ^~~~~~~~~~~~~~~~~~
12 warnings generated.
src/shared/bap.c:1495:8: warning: Use of memory after it is freed
        bap = bt_bap_ref_safe(bap);
              ^~~~~~~~~~~~~~~~~~~~
src/shared/bap.c:2245:20: warning: Use of memory after it is freed
        return queue_find(stream->bap->streams, NULL, stream);
                          ^~~~~~~~~~~~~~~~~~~~
2 warnings generated.
monitor/l2cap.c:1638:4: warning: Value stored to 'data' is never read
                        data += len;
                        ^       ~~~
monitor/l2cap.c:1639:4: warning: Value stored to 'size' is never read
                        size -= len;
                        ^       ~~~
2 warnings generated.
monitor/hwdb.c:59:2: warning: Value stored to 'hwdb' is never read
        hwdb = udev_hwdb_unref(hwdb);
        ^      ~~~~~~~~~~~~~~~~~~~~~
monitor/hwdb.c:64:2: warning: Value stored to 'udev' is never read
        udev = udev_unref(udev);
        ^      ~~~~~~~~~~~~~~~~
monitor/hwdb.c:106:2: warning: Value stored to 'hwdb' is never read
        hwdb = udev_hwdb_unref(hwdb);
        ^      ~~~~~~~~~~~~~~~~~~~~~
monitor/hwdb.c:111:2: warning: Value stored to 'udev' is never read
        udev = udev_unref(udev);
        ^      ~~~~~~~~~~~~~~~~
4 warnings generated.
tools/bluemoon.c:1102:8: warning: Null pointer passed to 1st parameter expecting 'nonnull'
                        if (strlen(optarg) > 3 && !strncmp(optarg, "hci", 3))
                            ^~~~~~~~~~~~~~
1 warning generated.
tools/meshctl.c:326:19: warning: Access to field 'mesh_devices' results in a dereference of a null pointer (loaded from variable 'default_ctrl')
        g_list_free_full(default_ctrl->mesh_devices, g_free);
                         ^~~~~~~~~~~~~~~~~~~~~~~~~~
tools/meshctl.c:762:2: warning: 2nd function call argument is an uninitialized value
        bt_shell_printf("Attempting to disconnect from %s\n", addr);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/meshctl.c:1957:2: warning: Value stored to 'len' is never read
        len = len + extra + strlen("local_node.json");
        ^     ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
3 warnings generated.
In file included from tools/mesh-gatt/crypto.c:32:
./src/shared/util.h:241:9: warning: 1st function call argument is an uninitialized value
        return be32_to_cpu(get_unaligned((const uint32_t *) ptr));
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./src/shared/util.h:33:26: note: expanded from macro 'be32_to_cpu'
#define be32_to_cpu(val) bswap_32(val)
                         ^~~~~~~~~~~~~
/usr/include/byteswap.h:34:21: note: expanded from macro 'bswap_32'
#define bswap_32(x) __bswap_32 (x)
                    ^~~~~~~~~~~~~~
In file included from tools/mesh-gatt/crypto.c:32:
./src/shared/util.h:251:9: warning: 1st function call argument is an uninitialized value
        return be64_to_cpu(get_unaligned((const uint64_t *) ptr));
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./src/shared/util.h:34:26: note: expanded from macro 'be64_to_cpu'
#define be64_to_cpu(val) bswap_64(val)
                         ^~~~~~~~~~~~~
/usr/include/byteswap.h:37:21: note: expanded from macro 'bswap_64'
#define bswap_64(x) __bswap_64 (x)
                    ^~~~~~~~~~~~~~
2 warnings generated.
ell/util.c:853:8: warning: The left operand of '>' is a garbage value
        if (x > UINT8_MAX)
            ~ ^
ell/util.c:871:8: warning: The left operand of '>' is a garbage value
        if (x > UINT16_MAX)
            ~ ^
2 warnings generated.
ell/pem.c:131:8: warning: Dereference of null pointer (loaded from variable 'eol')
                        if (*eol == '\r' || *eol == '\n')
                            ^~~~
ell/pem.c:166:18: warning: Dereference of null pointer (loaded from variable 'eol')
                if (buf_len && *eol == '\r' && *buf_ptr == '\n') {
                               ^~~~
ell/pem.c:166:34: warning: Dereference of null pointer (loaded from variable 'buf_ptr')
                if (buf_len && *eol == '\r' && *buf_ptr == '\n') {
                                               ^~~~~~~~

ell/pem.c:304:11: warning: 1st function call argument is an uninitialized value
result = pem_load_buffer(file.data, file.st.st_size,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ell/pem.c:469:9: warning: 1st function call argument is an uninitialized value
list = l_pem_load_certificate_list_from_data(file.data,
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
5 warnings generated.
ell/cert.c:644:41: warning: Access to field 'asn1_len' results in a dereference of a null pointer (loaded from variable 'cert')

        key = l_key_new(L_KEY_RSA, cert->asn1, cert->asn1_len);
                                               ^~~~~~~~~~~~~~

1 warning generated.
ell/gvariant-util.c:143:18: warning: The left operand of '>' is a garbage value
if (alignment > max_alignment)
~~~~~~~~~ ^
ell/gvariant-util.c:456:5: warning: Dereference of null pointer

                        !children[0].fixed_size) {
                         ^~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
ell/ecc-external.c:77:11: warning: Assigned value is garbage or undefined
                dest[i] = src[i];
                        ^ ~~~~~~
ell/ecc-external.c:160:18: warning: The right operand of '-' is a garbage value
                diff = left[i] - right[i] - borrow;
                               ^ ~~~~~~~~
ell/ecc-external.c:227:14: warning: 2nd function call argument is an uninitialized value
                        product = mul_64_64(left[i], right[k - i]);
                                  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
ell/ecc-external.c:408:9: warning: Assigned value is garbage or undefined
        tmp[1] = product[3];
               ^ ~~~~~~~~~~
ell/ecc-external.c:435:22: warning: The left operand of '&' is a garbage value
        tmp[1] = product[3] & 0xffffffff00000000ull;
                 ~~~~~~~~~~ ^
ell/ecc-external.c:483:22: warning: The left operand of '&' is a garbage value
        tmp[1] = product[5] & 0xffffffff00000000ull;
                 ~~~~~~~~~~ ^
ell/ecc-external.c:688:28: warning: The left operand of '>>' is a garbage value
                tmp[i] = (product[8 + i] >> 9) | (product[9 + i] << 55);
                          ~~~~~~~~~~~~~~ ^
7 warnings generated.
In file included from tools/parser/l2cap.c:24:
tools/parser/parser.h:121:16: warning: Dereference of null pointer
                                time_t t = f->ts.tv_sec;
                                           ^~~~~~~~~~~~
tools/parser/parser.h:127:27: warning: Dereference of null pointer
                                printf("%8lu.%06lu ", f->ts.tv_sec, f->ts.tv_usec);
                                                      ^~~~~~~~~~~~
/usr/include/x86_64-linux-gnu/bits/stdio2.h:111:42: note: expanded from macro 'printf'
  __printf_chk (__USE_FORTIFY_LEVEL - 1, __VA_ARGS__)
                                         ^~~~~~~~~~~
In file included from tools/parser/l2cap.c:24:
tools/parser/parser.h:129:18: warning: Access to field 'in' results in a dereference of a null pointer (loaded from variable 'f')
                printf("%c ", (f->in ? '>' : '<'));
                               ^~~~~
/usr/include/x86_64-linux-gnu/bits/stdio2.h:111:42: note: expanded from macro 'printf'
  __printf_chk (__USE_FORTIFY_LEVEL - 1, __VA_ARGS__)
                                         ^~~~~~~~~~~
3 warnings generated.
In file included from tools/parser/sdp.c:24:
tools/parser/parser.h:121:16: warning: Dereference of null pointer
                                time_t t = f->ts.tv_sec;
                                           ^~~~~~~~~~~~
tools/parser/parser.h:127:27: warning: Dereference of null pointer
                                printf("%8lu.%06lu ", f->ts.tv_sec, f->ts.tv_usec);
                                                      ^~~~~~~~~~~~
/usr/include/x86_64-linux-gnu/bits/stdio2.h:111:42: note: expanded from macro 'printf'
  __printf_chk (__USE_FORTIFY_LEVEL - 1, __VA_ARGS__)
                                         ^~~~~~~~~~~
In file included from tools/parser/sdp.c:24:
tools/parser/parser.h:129:18: warning: Access to field 'in' results in a dereference of a null pointer (loaded from variable 'f')
                printf("%c ", (f->in ? '>' : '<'));
                               ^~~~~
/usr/include/x86_64-linux-gnu/bits/stdio2.h:111:42: note: expanded from macro 'printf'
  __printf_chk (__USE_FORTIFY_LEVEL - 1, __VA_ARGS__)
                                         ^~~~~~~~~~~
3 warnings generated.
In file included from tools/parser/ppp.c:22:
tools/parser/parser.h:156:2: warning: Undefined or garbage value returned to caller
        return *u8_ptr;
        ^~~~~~~~~~~~~~
tools/parser/ppp.c:108:30: warning: The left operand of '&' is a garbage value
        if (*((uint8_t *) frm->ptr) & 0x80)
            ~~~~~~~~~~~~~~~~~~~~~~~ ^
2 warnings generated.
emulator/serial.c:150:2: warning: Assigned value is garbage or undefined
        enum btdev_type uninitialized_var(type);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
emulator/serial.c:150:36: warning: Value stored to 'type' during its initialization is never read
        enum btdev_type uninitialized_var(type);
                                          ^~~~
emulator/serial.c:36:30: note: expanded from macro 'uninitialized_var'
#define uninitialized_var(x) x = x
                             ^   ~
emulator/serial.c:213:2: warning: Assigned value is garbage or undefined
        enum btdev_type uninitialized_var(dev_type);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
emulator/serial.c:213:36: warning: Value stored to 'dev_type' during its initialization is never read
        enum btdev_type uninitialized_var(dev_type);
                                          ^~~~~~~~
emulator/serial.c:36:30: note: expanded from macro 'uninitialized_var'
#define uninitialized_var(x) x = x
                             ^   ~
4 warnings generated.
emulator/server.c:200:2: warning: Assigned value is garbage or undefined
        enum btdev_type uninitialized_var(type);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
emulator/server.c:200:36: warning: Value stored to 'type' during its initialization is never read
        enum btdev_type uninitialized_var(type);
                                          ^~~~
emulator/server.c:36:30: note: expanded from macro 'uninitialized_var'
#define uninitialized_var(x) x = x
                             ^   ~
2 warnings generated.
emulator/b1ee.c:258:3: warning: Potential leak of memory pointed to by 'server_port'
                int opt;
                ^~~~~~~
emulator/b1ee.c:258:3: warning: Potential leak of memory pointed to by 'sniffer_port'
                int opt;
                ^~~~~~~
emulator/b1ee.c:289:2: warning: Value stored to 'argc' is never read
        argc = argc - optind;
        ^      ~~~~~~~~~~~~~
3 warnings generated.
gobex/gobex-header.c:95:2: warning: Null pointer passed to 2nd parameter expecting 'nonnull'
        memcpy(to, from, count);
        ^~~~~~~~~~~~~~~~~~~~~~~

1 warning generated.
gobex/gobex-transfer.c:423:7: warning: Use of memory after it is freed
if (!g_slist_find(transfers, transfer))
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
attrib/gatt.c:970:2: warning: Potential leak of memory pointed to by 'long_write'

        return prepare_write(long_write);
        ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
emulator/btdev.c:5448:23: warning: Access to field 'le_ext_adv' results in a dereference of a null pointer (loaded from variable 'remote')
        ext_adv = queue_find(remote->le_ext_adv, match_sid,
                             ^~~~~~~~~~~~~~~~~~

1 warning generated.
tools/btpclient.c:2495:3: warning: Value stored to 'reply' is never read
reply = l_dbus_message_new_error(ag.pending_req,
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1 warning generated.
android/avdtp.c:756:25: warning: Use of memory after it is freed

                session->prio_queue = g_slist_remove(session->prio_queue, req);
                                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
android/avdtp.c:763:24: warning: Use of memory after it is freed
                session->req_queue = g_slist_remove(session->req_queue, req);
                                     ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2 warnings generated.
profiles/audio/media.c:1057:7: warning: Use of memory after it is freed
                if (req->cb != pac_select_cb) {
                    ^~~~~~~
1 warning generated.
obexd/src/main.c:308:6: warning: Array access (from variable 'option_root') results in a null pointer dereference
        if (option_root[0] != '/') {
            ^~~~~~~~~~~~~~

1 warning generated.
obexd/plugins/vcard.c:701:6: warning: 2nd function call argument is an uninitialized value
if (select_qp_encoding(format, address_fields[0], address_fields[1],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
obexd/plugins/vcard.c:701:6: warning: 3rd function call argument is an uninitialized value
if (select_qp_encoding(format, address_fields[0], address_fields[1],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
obexd/plugins/vcard.c:701:6: warning: 4th function call argument is an uninitialized value
if (select_qp_encoding(format, address_fields[0], address_fields[1],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
obexd/plugins/vcard.c:701:6: warning: 5th function call argument is an uninitialized value
if (select_qp_encoding(format, address_fields[0], address_fields[1],
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
4 warnings generated.
obexd/src/logind.c: In function ‘logind_init’:
obexd/src/logind.c:126:8: error: variable ‘source’ set but not used [-Werror=unused-but-set-variable]

  126 |  guint source;
      |        ^~~~~~
obexd/src/logind.c: In function ‘logind_register’:
obexd/src/logind.c:203:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  203 |  struct callback_pair *cbs = g_new(struct callback_pair, 1);
      |  ^~~~~~
obexd/src/logind.c: In function ‘logind_unregister’:
obexd/src/logind.c:215:2: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
  215 |  GSList *cb_node = g_slist_find_custom(callbacks, init_cb, find_cb);
      |  ^~~~~~

cc1: all warnings being treated as errors
make[1]: *** [Makefile:9776: obexd/src/obexd-logind.o] Error 1
make[1]: *** Waiting for unfinished jobs....
obexd/plugins/messages-dummy.c:165:9: warning: Access to field 'next' results in a dereference of a null pointer (loaded from variable 'cur')

                cur = cur->next;
                      ^~~~~~~~~

1 warning generated.
make: *** [Makefile:4690: all] Error 2

---
Regards,
Linux Bluetooth

#4 lore raw

PATCH 2/4 obexd/bluetooth: Support calling bluetooth_init() after bluetooth_exit()

In reply to Andrew Sayers

bluetooth_exit() didn't previously unregister itself thoroughly. That was fine if it was only called when the service was about to exit, because everything was implicitly unregistered when the process ended. But we need to be more scrupulous if this can be called throughout the program's lifecycle.

Send UnregisterProfile messages directly from bluetooth_exit(), then call unregister_profile(profile).

The UnregisterProfile message can't be sent directly from unregister_profile(), because that also needs to be called when register_profile() fails halfway through.

Do not free profiles in bluetooth_exit() - profiles are needed by a future call to bluetooth_init(), or will be freed by bluetooth_stop() if necessary.

---
 obexd/plugins/bluetooth.c | 30 ++++++++++++++++++++++++++++--
 1 file changed, 28 insertions(+), 2 deletions(-)
obexd/plugins/bluetooth.c +28 -2
index afb2215bd..bcaf19bae 100644
@@ -440,12 +440,38 @@ static int bluetooth_init(void)
 
 static void bluetooth_exit(void)
 {
+	DBusMessage *msg;
+	DBusMessageIter iter;
+	GSList *l;
+
 	g_dbus_remove_watch(connection, listener_id);
 
-	g_slist_free_full(profiles, profile_free);
+	for (l = profiles; l; l = l->next) {
+		struct bluetooth_profile *profile = l->data;
+
+		if (profile->path == NULL)
+			continue;
 
-	if (connection)
+		msg = dbus_message_new_method_call(
+					"org.bluez", "/org/bluez",
+					"org.bluez.ProfileManager1",
+					"UnregisterProfile");
+
+		dbus_message_iter_init_append(msg, &iter);
+
+		dbus_message_iter_append_basic(&iter,
+						DBUS_TYPE_OBJECT_PATH,
+						&profile->path);
+
+		g_dbus_send_message(connection, msg);
+
+		unregister_profile(profile);
+	}
+
+	if (connection) {
 		dbus_connection_unref(connection);
+		connection = NULL;
+	}
 
 	obex_transport_driver_unregister(&driver);
 }
Signature · 1 line
2.49.0
#5 lore raw

PATCH 3/4 obex: unregster profiles when the user is inactive

In reply to Andrew Sayers

Obexd is usually run as a user service, and can exhibit surprising behaviour if two users are logged in at the same time.

Unregister profiles when the user is detected to be off-seat.

It may be impossible to detect whether a user is on-seat in some cases. For example, a version of obexd compiled with systemd support might be run outside of a systemd environment. Warn and leave services registered if that happens.

Obexd can be run as a system service, in which case this check makes no sense. Disable this check when called with --system-bus.

Obexd can also be run by a user that does not have an active session. For example, someone could use ssh to access the system. There might be a use case where someone needs Bluetooth access but can't log in with a keyboard, or there might be a security issue with doing so. This isn't handled explicitly by this patch, but a future patch could add support by calling logind_set(FALSE) in the same way as is currently done with --system-bus.

Based in large part on the wireplumber code mentioned by Pauli Virtanen:
https://gitlab.freedesktop.org/pipewire/wireplumber/-/blob/master/modules/module-logind.c#L52

Other services are likely to need similar functionality, so I have created a gist to demonstrate the basic technique:
https://gist.github.com/andrew-sayers/1c4a24f86a9a4c1b1e38d109f1bd1d1e

---
 Makefile.obexd            |  10 ++
 obexd/client/pbap.c       |  14 ++-
 obexd/plugins/bluetooth.c |  14 ++-
 obexd/src/logind.c        | 238 ++++++++++++++++++++++++++++++++++++++
 obexd/src/logind.h        |  26 +++++
 obexd/src/main.c          |   4 +
 6 files changed, 302 insertions(+), 4 deletions(-)
 create mode 100644 obexd/src/logind.c
 create mode 100644 obexd/src/logind.h
Makefile.obexd +10 -0
index 74dd977a0..b59cfaf8f 100644
@@ -67,6 +67,7 @@ obexd_src_obexd_SOURCES = $(btio_sources) $(gobex_sources) \
 			obexd/src/main.c obexd/src/obexd.h \
 			obexd/src/plugin.h obexd/src/plugin.c \
 			obexd/src/log.h obexd/src/log.c \
+			obexd/src/logind.h obexd/src/logind.c \
 			obexd/src/manager.h obexd/src/manager.c \
 			obexd/src/obex.h obexd/src/obex.c obexd/src/obex-priv.h \
 			obexd/src/mimetype.h obexd/src/mimetype.c \
@@ -96,6 +97,8 @@ obexd_src_obexd_LDADD = lib/libbluetooth-internal.la \
 
 if EXTERNAL_PLUGINS
 obexd_src_obexd_LDFLAGS = $(AM_LDFLAGS) -Wl,--export-dynamic
+else
+obexd_src_obexd_LDFLAGS =
 endif
 
 obexd_src_obexd_CPPFLAGS = $(AM_CPPFLAGS) $(GLIB_CFLAGS) $(DBUS_CFLAGS) \
@@ -109,6 +112,13 @@ obexd-add-service-symlink:
 obexd-remove-service-symlink:
 endif
 
+if OBEX
+if SYSTEMD
+obexd_src_obexd_CPPFLAGS += -DSYSTEMD
+obexd_src_obexd_LDFLAGS += -lsystemd
+endif
+endif
+
 obexd_src_obexd_SHORTNAME = obexd
 
 obexd_builtin_files = obexd/src/builtin.h $(obexd_builtin_nodist)
obexd/client/pbap.c +12 -2
index e2a3c1b90..228f12025 100644
@@ -27,6 +27,7 @@
 #include "gdbus/gdbus.h"
 
 #include "obexd/src/log.h"
+#include "obexd/src/logind.h"
 #include "obexd/src/obexd.h"
 
 #include "transfer.h"
@@ -1454,7 +1455,7 @@ static struct obc_driver pbap = {
 	.remove = pbap_remove
 };
 
-int pbap_init(void)
+static int pbap_init_cb(void)
 {
 	int err;
 
@@ -1481,7 +1482,7 @@ int pbap_init(void)
 	return 0;
 }
 
-void pbap_exit(void)
+static void pbap_exit_cb(void)
 {
 	DBusMessage *msg;
 	DBusMessageIter iter;
@@ -1510,3 +1511,12 @@ void pbap_exit(void)
 
 	obc_driver_unregister(&pbap);
 }
+
+int pbap_init(void)
+{
+	return logind_register(pbap_init_cb, pbap_exit_cb);
+}
+void pbap_exit(void)
+{
+	return logind_unregister(pbap_init_cb, pbap_exit_cb);
+}
obexd/plugins/bluetooth.c +12 -2
index bcaf19bae..18d3b986c 100644
@@ -35,6 +35,7 @@
 #include "obexd/src/transport.h"
 #include "obexd/src/service.h"
 #include "obexd/src/log.h"
+#include "obexd/src/logind.h"
 
 #define BT_RX_MTU 32767
 #define BT_TX_MTU 32767
@@ -426,7 +427,7 @@ static const struct obex_transport_driver driver = {
 
 static unsigned int listener_id = 0;
 
-static int bluetooth_init(void)
+static int bluetooth_init_cb(void)
 {
 	connection = g_dbus_setup_private(DBUS_BUS_SYSTEM, NULL, NULL);
 	if (connection == NULL)
@@ -438,7 +439,7 @@ static int bluetooth_init(void)
 	return obex_transport_driver_register(&driver);
 }
 
-static void bluetooth_exit(void)
+static void bluetooth_exit_cb(void)
 {
 	DBusMessage *msg;
 	DBusMessageIter iter;
@@ -476,4 +477,13 @@ static void bluetooth_exit(void)
 	obex_transport_driver_unregister(&driver);
 }
 
+static int bluetooth_init(void)
+{
+	return logind_register(bluetooth_init_cb, bluetooth_exit_cb);
+}
+static void bluetooth_exit(void)
+{
+	return logind_unregister(bluetooth_init_cb, bluetooth_exit_cb);
+}
+
 OBEX_PLUGIN_DEFINE(bluetooth, bluetooth_init, bluetooth_exit)
obexd/src/logind.c new file +238 -0

238 lines not on this page · raw message

obexd/src/logind.h new file +26 -0
new file mode 100644
index 000000000..2d0f07a67
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ *
+ *  Enable functionality only when the user is active
+ *
+ *  Copyright (C) 2007-2010  Marcel Holtmann <[email protected]>
+ *
+ *
+ */
+
+#ifdef SYSTEMD
+
+typedef int (*login_init_cb)(void);
+typedef void (*login_exit_cb)(void);
+
+int logind_register(login_init_cb init_cb, login_exit_cb exit_cb);
+void logind_unregister(login_init_cb init_cb, login_exit_cb exit_cb);
+int logind_set(gboolean enabled);
+
+#else
+
+#define logind_register(init_cb, exit_cb) init_cb()
+#define logind_unregister(init_cb, exit_cb) exit_cb()
+#define logind_set(enabled) 0
+
+#endif
obexd/src/main.c +4 -0
index 703173662..6837f0d73 100644
@@ -35,6 +35,7 @@
 #include "../client/manager.h"
 
 #include "log.h"
+#include "logind.h"
 #include "obexd.h"
 #include "server.h"
 
@@ -275,6 +276,9 @@ int main(int argc, char *argv[])
 
 	__obex_log_init(option_debug, option_detach);
 
+	if (option_system_bus)
+		logind_set(FALSE);
+
 	DBG("Entering main loop");
 
 	main_loop = g_main_loop_new(NULL, FALSE);
Signature · 1 line
2.49.0
#6 lore raw

PATCH 4/4 Revert "obexd: only run one instance at once"

In reply to Andrew Sayers

No longer needed now services can share resources.

This reverts commit 8d472b8758dcdd89bf13cf2fb06a8846e1f483a0.

---
 obexd/src/obex.service.in | 9 ---------
 1 file changed, 9 deletions(-)
obexd/src/obex.service.in +0 -9
index f269bc513..cf4d8c985 100644
@@ -1,19 +1,10 @@
 [Unit]
 Description=Bluetooth OBEX service
-# This is a user-specific service, but bluetooth is a device-specific protocol.
-# Only run one instance at a time, even if multiple users log in at once:
-ConditionPathExists=!/run/lock/bluez/obexd.lock
-ConditionUser=!@system
 
 [Service]
 Type=dbus
 BusName=org.bluez.obex
 ExecStart=@PKGLIBEXECDIR@/obexd
 
-# If the service fails on the following line, please ensure
-# the bluez tmpfile has been installed in /usr/lib/tmpfiles.d/
-ExecStartPre=touch /run/lock/bluez/obexd.lock
-ExecStopPost=rm -f /run/lock/bluez/obexd.lock
-
 [Install]
 Alias=dbus-org.bluez.obex.service
Signature · 1 line
2.49.0
#7 lore raw
In reply to Andrew Sayers
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 6 lines · On Wed, 23 Apr 2025 17:33:22 +0100 you wrote:

This is a follow-up to "obexd: only run one instance at once". Instead of refusing to run parallel services, it unregisters profiles when the user is inactive. This avoids the need for tmpfiles, and avoids issues where the user with the obex service logs out, leaving obex disabled altogether.

Quoted 6 lines

Luiz previously suggested moving this to systemd, but I haven't had much luck getting the systemd devs to accept changes, and Pauli's mention of elogind (i.e. logind without systemd) suggests it's probably better to avoid the dependency anyway.

[...]

Here is the summary with links:
- [BlueZ,1/4] pbap: Support calling pbap_init() after pbap_exit()
(no matching commit)
- [BlueZ,2/4] obexd/bluetooth: Support calling bluetooth_init() after bluetooth_exit() (no matching commit)
- [BlueZ,3/4] obex: unregster profiles when the user is inactive
(no matching commit)
- [BlueZ,4/4] Revert "obexd: only run one instance at once"

    https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=f8d0dc114036

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html