Skip to contentSkip to conversation

Netfilter fixes for net

PATCH Applied Pablo Neira Ayuso 2 participants 7 messages Jun 5, 2025

Subsystems (4)
lore
Share & tools
lore

Pablo Neira Ayuso

author maintainer
#0 lore raw

cover Netfilter fixes for net

Hi,

The following patchset contains Netfilter fixes for net:

1) Zero out the remainder in nft_pipapo AVX2 implementation, otherwise next lookup could bogusly report a mismatch. This is followed by two patches to update nft_pipapo selftests to cover for the previous bug. From Florian Westphal.

2) Check for reverse tuple too in case of esoteric NAT collisions for UDP traffic and extend selftest coverage. Also from Florian.

Please, pull these changes from:

git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf.git nf-25-06-05

Thanks.

----------------------------------------------------------------

The following changes since commit 12c331b29c7397ac3b03584e12902990693bc248:

gve: add missing NULL check for gve_alloc_pending_packet() in TX DQO (2025-06-04 12:06:13 +0100)

are available in the Git repository at:

git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf.git tags/nf-25-06-05

for you to fetch changes up to 3c3c3248496a3a1848ec5d923f2eee0edf60226e:

selftests: netfilter: nft_nat.sh: add test for reverse clash with nat (2025-06-05 10:50:05 +0200)

----------------------------------------------------------------
netfilter pull request 25-06-05

----------------------------------------------------------------
Florian Westphal (5):
netfilter: nf_set_pipapo_avx2: fix initial map fill
selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
netfilter: nf_nat: also check reverse tuple to obtain clashing entry
selftests: netfilter: nft_nat.sh: add test for reverse clash with nat

 net/netfilter/nf_nat_core.c                        |  12 ++-
 net/netfilter/nft_set_pipapo_avx2.c                |  21 ++++-
 .../selftests/net/netfilter/nft_concat_range.sh    | 102 ++++++++++++++++++---
 tools/testing/selftests/net/netfilter/nft_nat.sh   |  81 +++++++++++++++-
 4 files changed, 193 insertions(+), 23 deletions(-)
author maintainer
#1 lore raw

PATCH 1/5 netfilter: nf_set_pipapo_avx2: fix initial map fill

From: Florian Westphal <[email protected]>

If the first field doesn't cover the entire start map, then we must zero out the remainder, else we leak those bits into the next match round map.

The early fix was incomplete and did only fix up the generic C implementation.

A followup patch adds a test case to nft_concat_range.sh.

Fixes 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill")
---
 net/netfilter/nft_set_pipapo_avx2.c | 21 ++++++++++++++++++++-
 1 file changed, 20 insertions(+), 1 deletion(-)
net/netfilter/nft_set_pipapo_avx2.c +20 -1
index c15db28c5ebc..be7c16c79f71 100644
@@ -1113,6 +1113,25 @@ bool nft_pipapo_avx2_estimate(const struct nft_set_desc *desc, u32 features,
 	return true;
 }
 
+/**
+ * pipapo_resmap_init_avx2() - Initialise result map before first use
+ * @m:		Matching data, including mapping table
+ * @res_map:	Result map
+ *
+ * Like pipapo_resmap_init() but do not set start map bits covered by the first field.
+ */
+static inline void pipapo_resmap_init_avx2(const struct nft_pipapo_match *m, unsigned long *res_map)
+{
+	const struct nft_pipapo_field *f = m->f;
+	int i;
+
+	/* Starting map doesn't need to be set to all-ones for this implementation,
+	 * but we do need to zero the remaining bits, if any.
+	 */
+	for (i = f->bsize; i < m->bsize_max; i++)
+		res_map[i] = 0ul;
+}
+
 /**
  * nft_pipapo_avx2_lookup() - Lookup function for AVX2 implementation
  * @net:	Network namespace
@@ -1171,7 +1190,7 @@ bool nft_pipapo_avx2_lookup(const struct net *net, const struct nft_set *set,
 	res  = scratch->map + (map_index ? m->bsize_max : 0);
 	fill = scratch->map + (map_index ? 0 : m->bsize_max);
 
-	/* Starting map doesn't need to be set for this implementation */
+	pipapo_resmap_init_avx2(m, res);
 
 	nft_pipapo_avx2_prepare();
 
Signature · 1 line
2.30.2
#2 lore raw

Re: [PATCH net 1/5] netfilter: nf_set_pipapo_avx2: fix initial map fill

This series was applied to netdev/net.git (main) by Pablo Neira Ayuso <[email protected]>:

Hello:

This series was applied to netdev/net.git (main)
by Pablo Neira Ayuso <[email protected]>:

Quoted 9 lines · On Thu, 5 Jun 2025 10:57:31 +0200 you wrote:

From: Florian Westphal <[email protected]>

If the first field doesn't cover the entire start map, then we must zero out the remainder, else we leak those bits into the next match round map.

The early fix was incomplete and did only fix up the generic C implementation.

[...]

Here is the summary with links:
- [net,1/5] netfilter: nf_set_pipapo_avx2: fix initial map fill

    https://git.kernel.org/netdev/net/c/ea77c397bff8
  - [net,2/5] selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing
    https://git.kernel.org/netdev/net/c/febe7eda74d1
  - [net,3/5] selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug
    https://git.kernel.org/netdev/net/c/38399f2b0fe4
  - [net,4/5] netfilter: nf_nat: also check reverse tuple to obtain clashing entry
    https://git.kernel.org/netdev/net/c/50d9ce9679dd
  - [net,5/5] selftests: netfilter: nft_nat.sh: add test for reverse clash with nat
    https://git.kernel.org/netdev/net/c/3c3c3248496a

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
author maintainer
#3 lore raw

PATCH 2/5 selftests: netfilter: nft_concat_range.sh: prefer per element counters for testing

In reply to Pablo Neira Ayuso

From: Florian Westphal <[email protected]>

The selftest uses following rule:
... @test counter name "test"

Then sends a packet, then checks if the named counter did increment or not.

This is fine for the 'no-match' test case: If anything matches the counter increments and the test fails as expected.

But for the 'should match' test cases this isn't optimal. Consider buggy matching, where the packet matches entry x, but it should have matched entry y.

In that case the test would erronously pass.

Rework the selftest to use per-element counters to avoid this.

After sending packet that should have matched entry x, query the relevant element via 'nft reset element' and check that its counter had incremented.

The 'nomatch' case isn't altered, no entry should match so the named counter must be 0, changing it to the per-element counter would then pass if another entry matches.

The downside of this change is a slight increase in test run-time by a few seconds.

---
 .../net/netfilter/nft_concat_range.sh         | 40 ++++++++++++++-----
 1 file changed, 30 insertions(+), 10 deletions(-)
tools/testing/selftests/net/netfilter/nft_concat_range.sh +30 -10
index efea93cf23d4..86b8ce742700 100755
@@ -419,6 +419,7 @@ table inet filter {
 
 	set test {
 		type ${type_spec}
+		counter
 		flags interval,timeout
 	}
 
@@ -1158,8 +1159,17 @@ del() {
 	fi
 }
 
-# Return packet count from 'test' counter in 'inet filter' table
+# Return packet count for elem $1 from 'test' counter in 'inet filter' table
 count_packets() {
+	found=0
+	for token in $(nft reset element inet filter test "${1}" ); do
+		[ ${found} -eq 1 ] && echo "${token}" && return
+		[ "${token}" = "packets" ] && found=1
+	done
+}
+
+# Return packet count from 'test' counter in 'inet filter' table
+count_packets_nomatch() {
 	found=0
 	for token in $(nft list counter inet filter test); do
 		[ ${found} -eq 1 ] && echo "${token}" && return
@@ -1206,6 +1216,10 @@ perf() {
 
 # Set MAC addresses, send single packet, check that it matches, reset counter
 send_match() {
+	local elem="$1"
+
+	shift
+
 	ip link set veth_a address "$(format_mac "${1}")"
 	ip -n B link set veth_b address "$(format_mac "${2}")"
 
@@ -1216,7 +1230,7 @@ send_match() {
 		eval src_"$f"=\$\(format_\$f "${2}"\)
 	done
 	eval send_\$proto
-	if [ "$(count_packets)" != "1" ]; then
+	if [ "$(count_packets "$elem")" != "1" ]; then
 		err "${proto} packet to:"
 		err "  $(for f in ${dst}; do
 			 eval format_\$f "${1}"; printf ' '; done)"
@@ -1242,7 +1256,7 @@ send_nomatch() {
 		eval src_"$f"=\$\(format_\$f "${2}"\)
 	done
 	eval send_\$proto
-	if [ "$(count_packets)" != "0" ]; then
+	if [ "$(count_packets_nomatch)" != "0" ]; then
 		err "${proto} packet to:"
 		err "  $(for f in ${dst}; do
 			 eval format_\$f "${1}"; printf ' '; done)"
@@ -1262,6 +1276,8 @@ send_nomatch() {
 test_correctness_main() {
 	range_size=1
 	for i in $(seq "${start}" $((start + count))); do
+		local elem=""
+
 		end=$((start + range_size))
 
 		# Avoid negative or zero-sized port ranges
@@ -1272,15 +1288,16 @@ test_correctness_main() {
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
 
-		add "$(format)" || return 1
+		elem="$(format)"
+		add "$elem" || return 1
 		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
-			send_match "${j}" $((j + src_delta)) || return 1
+			send_match "$elem" "${j}" $((j + src_delta)) || return 1
 		done
 		send_nomatch $((end + 1)) $((end + 1 + src_delta)) || return 1
 
 		# Delete elements now and then
 		if [ $((i % 3)) -eq 0 ]; then
-			del "$(format)" || return 1
+			del "$elem" || return 1
 			for j in $(seq "$start" \
 				   $((range_size / 2 + 1)) ${end}); do
 				send_nomatch "${j}" $((j + src_delta)) \
@@ -1572,14 +1589,17 @@ test_timeout() {
 
 	range_size=1
 	for i in $(seq "$start" $((start + count))); do
+		local elem=""
+
 		end=$((start + range_size))
 		srcstart=$((start + src_delta))
 		srcend=$((end + src_delta))
 
-		add "$(format)" || return 1
+		elem="$(format)"
+		add "$elem" || return 1
 
 		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
-			send_match "${j}" $((j + src_delta)) || return 1
+			send_match "$elem" "${j}" $((j + src_delta)) || return 1
 		done
 
 		range_size=$((range_size + 1))
@@ -1737,7 +1757,7 @@ test_bug_reload() {
 		srcend=$((end + src_delta))
 
 		for j in $(seq "$start" $((range_size / 2 + 1)) ${end}); do
-			send_match "${j}" $((j + src_delta)) || return 1
+			send_match "$(format)" "${j}" $((j + src_delta)) || return 1
 		done
 
 		range_size=$((range_size + 1))
@@ -1817,7 +1837,7 @@ test_bug_avx2_mismatch()
 	dst_addr6="$a2"
 	send_icmp6
 
-	if [ "$(count_packets)" -gt "0" ]; then
+	if [ "$(count_packets "{ icmpv6 . $a1 }")" -gt "0" ]; then
 		err "False match for $a2"
 		return 1
 	fi
Signature · 1 line
2.30.2
author maintainer
#4 lore raw

PATCH 3/5 selftests: netfilter: nft_concat_range.sh: add datapath check for map fill bug

In reply to Pablo Neira Ayuso

From: Florian Westphal <[email protected]>

commit 0935ee6032df ("selftests: netfilter: add test case for recent mismatch bug") added a regression check for incorrect initial fill of the result map that was fixed with 791a615b7ad2 ("netfilter: nf_set_pipapo: fix initial map fill").

The test used 'nft get element', i.e., control plane checks for match/nomatch results.

The control plane however doesn't use avx2 version, so we need to send+match packets.

As the additional packet match/nomatch is slow, don't do this for every element added/removed: add and use maybe_send_(no)match helpers and use them.

---
 .../net/netfilter/nft_concat_range.sh         | 62 +++++++++++++++++--
 1 file changed, 58 insertions(+), 4 deletions(-)
tools/testing/selftests/net/netfilter/nft_concat_range.sh +58 -4
index 86b8ce742700..cd12b8b5ac0e 100755
@@ -378,7 +378,7 @@ display		net,port,proto
 type_spec	ipv4_addr . inet_service . inet_proto
 chain_spec	ip daddr . udp dport . meta l4proto
 dst		addr4 port proto
-src
+src		 
 start		1
 count		9
 src_delta	9
@@ -1269,6 +1269,42 @@ send_nomatch() {
 	fi
 }
 
+maybe_send_nomatch() {
+	local elem="$1"
+	local what="$4"
+
+	[ $((RANDOM%20)) -gt 0 ] && return
+
+	dst_addr4="$2"
+	dst_port="$3"
+	send_udp
+
+	if [ "$(count_packets_nomatch)" != "0" ]; then
+		err "Packet to $dst_addr4:$dst_port did match $what"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+}
+
+maybe_send_match() {
+	local elem="$1"
+	local what="$4"
+
+	[ $((RANDOM%20)) -gt 0 ] && return
+
+	dst_addr4="$2"
+	dst_port="$3"
+	send_udp
+
+	if [ "$(count_packets "{ $elem }")" != "1" ]; then
+		err "Packet to $dst_addr4:$dst_port did not match $what"
+		err "$(nft -a list ruleset)"
+		return 1
+	fi
+	nft reset counter inet filter test >/dev/null
+	nft reset element inet filter test "{ $elem }" >/dev/null
+}
+
 # Correctness test template:
 # - add ranged element, check that packets match it
 # - check that packets outside range don't match it
@@ -1776,22 +1812,34 @@ test_bug_net_port_proto_match() {
 	range_size=1
 	for i in $(seq 1 10); do
 		for j in $(seq 1 20) ; do
-			elem=$(printf "10.%d.%d.0/24 . %d1-%d0 . 6-17 " ${i} ${j} ${i} "$((i+1))")
+			local dport=$j
+
+			elem=$(printf "10.%d.%d.0/24 . %d-%d0 . 6-17 " ${i} ${j} ${dport} "$((dport+1))")
+
+			# too slow, do not test all addresses
+			maybe_send_nomatch "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d1" $((dport+1))) "before add" || return 1
 
 			nft "add element inet filter test { $elem }" || return 1
+
+			maybe_send_match "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d" $dport) "after add" || return 1
+
 			nft "get element inet filter test { $elem }" | grep -q "$elem"
 			if [ $? -ne 0 ];then
 				local got=$(nft "get element inet filter test { $elem }")
 				err "post-add: should have returned $elem but got $got"
 				return 1
 			fi
+
+			maybe_send_nomatch "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d1" $((dport+1))) "out-of-range" || return 1
 		done
 	done
 
 	# recheck after set was filled
 	for i in $(seq 1 10); do
 		for j in $(seq 1 20) ; do
-			elem=$(printf "10.%d.%d.0/24 . %d1-%d0 . 6-17 " ${i} ${j} ${i} "$((i+1))")
+			local dport=$j
+
+			elem=$(printf "10.%d.%d.0/24 . %d-%d0 . 6-17 " ${i} ${j} ${dport} "$((dport+1))")
 
 			nft "get element inet filter test { $elem }" | grep -q "$elem"
 			if [ $? -ne 0 ];then
@@ -1799,6 +1847,9 @@ test_bug_net_port_proto_match() {
 				err "post-fill: should have returned $elem but got $got"
 				return 1
 			fi
+
+			maybe_send_match "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d" $dport) "recheck" || return 1
+			maybe_send_nomatch "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d1" $((dport+1))) "recheck out-of-range" || return 1
 		done
 	done
 
@@ -1806,9 +1857,10 @@ test_bug_net_port_proto_match() {
 	for i in $(seq 1 10); do
 		for j in $(seq 1 20) ; do
 			local rnd=$((RANDOM%10))
+			local dport=$j
 			local got=""
 
-			elem=$(printf "10.%d.%d.0/24 . %d1-%d0 . 6-17 " ${i} ${j} ${i} "$((i+1))")
+			elem=$(printf "10.%d.%d.0/24 . %d-%d0 . 6-17 " ${i} ${j} ${dport} "$((dport+1))")
 			if [ $rnd -gt 0 ];then
 				continue
 			fi
@@ -1819,6 +1871,8 @@ test_bug_net_port_proto_match() {
 				err "post-delete: query for $elem returned $got instead of error."
 				return 1
 			fi
+
+			maybe_send_nomatch "$elem" $(printf "10.%d.%d.1" $i $j) $(printf "%d" $dport) "match after deletion" || return 1
 		done
 	done
 
Signature · 1 line
2.30.2
author maintainer
#5 lore raw

PATCH 4/5 netfilter: nf_nat: also check reverse tuple to obtain clashing entry

In reply to Pablo Neira Ayuso

From: Florian Westphal <[email protected]>

The logic added in the blamed commit was supposed to only omit nat source port allocation if neither the existing nor the new entry are subject to NAT.

However, its not enough to lookup the conntrack based on the proposed tuple, we must also check the reverse direction.

Otherwise there are esoteric cases where the collision is in the reverse direction because that colliding connection has a port rewrite, but the new entry doesn't. In this case, we only check the new entry and then erronously conclude that no clash exists anymore.

The existing (udp) tuple is:
a:p -> b:P, with nat translation to s:P, i.e. pure daddr rewrite, reverse tuple in conntrack table is s:P -> a:p.

When another UDP packet is sent directly to s, i.e. a:p->s:P, this is correctly detected as a colliding entry: tuple is taken by existing reply tuple in reverse direction.

But the colliding conntrack is only searched for with unreversed direction, and we can't find such entry matching a:p->s:P.

The incorrect conclusion is that the clashing entry has timed out and that no port address translation is required.

Such conntrack will then be discarded at nf_confirm time because the proposed reverse direction clashes with an existing mapping in the conntrack table.

Search for the reverse tuple too, this will then check the NAT bits of the colliding entry and triggers port reallocation.

Followp patch extends nft_nat.sh selftest to cover this scenario.

The IPS_SEQ_ADJUST change is also a bug fix:
Instead of checking for SEQ_ADJ this tested for SEEN_REPLY and ASSURED by accident -- _BIT is only for use with the test_bit() API.

This bug has little consequence in practice, because the sequence number adjustments are only useful for TCP which doesn't support clash resolution.

The existing test case (conntrack_reverse_clash.sh) exercise a race condition path (parallel conntrack creation on different CPUs), so the colliding entries have neither SEEN_REPLY nor ASSURED set.

Thanks to Yafang Shao and Shaun Brady for an initial investigation of this bug.

Fixes d8f84a9bc7c4 ("netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash")
---
 net/netfilter/nf_nat_core.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)
net/netfilter/nf_nat_core.c +9 -3
index aad84aabd7f1..f391cd267922 100644
@@ -248,7 +248,7 @@ static noinline bool
 nf_nat_used_tuple_new(const struct nf_conntrack_tuple *tuple,
 		      const struct nf_conn *ignored_ct)
 {
-	static const unsigned long uses_nat = IPS_NAT_MASK | IPS_SEQ_ADJUST_BIT;
+	static const unsigned long uses_nat = IPS_NAT_MASK | IPS_SEQ_ADJUST;
 	const struct nf_conntrack_tuple_hash *thash;
 	const struct nf_conntrack_zone *zone;
 	struct nf_conn *ct;
@@ -287,8 +287,14 @@ nf_nat_used_tuple_new(const struct nf_conntrack_tuple *tuple,
 	zone = nf_ct_zone(ignored_ct);
 
 	thash = nf_conntrack_find_get(net, zone, tuple);
-	if (unlikely(!thash)) /* clashing entry went away */
-		return false;
+	if (unlikely(!thash)) {
+		struct nf_conntrack_tuple reply;
+
+		nf_ct_invert_tuple(&reply, tuple);
+		thash = nf_conntrack_find_get(net, zone, &reply);
+		if (!thash) /* clashing entry went away */
+			return false;
+	}
 
 	ct = nf_ct_tuplehash_to_ctrack(thash);
 
Signature · 1 line
2.30.2
author maintainer
#6 lore raw

PATCH 5/5 selftests: netfilter: nft_nat.sh: add test for reverse clash with nat

In reply to Pablo Neira Ayuso

From: Florian Westphal <[email protected]>

This will fail without the previous bug fix because we erronously believe that the clashing entry went way.

However, the clash exists in the opposite direction due to an
existing nat mapping:
PASS: IP statless for ns2-LgTIuS
ERROR: failed to test udp ns1-x4iyOW to ns2-LgTIuS with dnat rule step 2, result: ""

This is partially adapted from test instructions from the below ubuntu tracker.

---
 .../selftests/net/netfilter/nft_nat.sh        | 81 +++++++++++++++++--
 1 file changed, 76 insertions(+), 5 deletions(-)
tools/testing/selftests/net/netfilter/nft_nat.sh +76 -5
index 9e39de26455f..a954754b99b3 100755
@@ -866,6 +866,24 @@ EOF
 	ip netns exec "$ns0" nft delete table $family nat
 }
 
+file_cmp()
+{
+	local infile="$1"
+	local outfile="$2"
+
+	if ! cmp "$infile" "$outfile";then
+		echo -n "Infile "
+		ls -l "$infile"
+		echo -n "Outfile "
+		ls -l "$outfile"
+		echo "ERROR: in and output file mismatch when checking $msg" 1>&1
+		ret=1
+		return 1
+	fi
+
+	return 0
+}
+
 test_stateless_nat_ip()
 {
 	local lret=0
@@ -966,11 +984,7 @@ EOF
 
 	wait
 
-	if ! cmp "$INFILE" "$OUTFILE";then
-		ls -l "$INFILE" "$OUTFILE"
-		echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2
-		lret=1
-	fi
+	file_cmp "$INFILE" "$OUTFILE" "udp with stateless nat" || lret=1
 
 	:> "$OUTFILE"
 
@@ -991,6 +1005,62 @@ EOF
 	return $lret
 }
 
+test_dnat_clash()
+{
+	local lret=0
+
+	if ! socat -h > /dev/null 2>&1;then
+		echo "SKIP: Could not run dnat clash test without socat tool"
+		[ $ret -eq 0 ] && ret=$ksft_skip
+		return $ksft_skip
+	fi
+
+ip netns exec "$ns0" nft -f /dev/stdin <<EOF
+flush ruleset
+table ip dnat-test {
+ chain prerouting {
+  type nat hook prerouting priority dstnat; policy accept;
+  ip daddr 10.0.2.1 udp dport 1234 counter dnat to 10.0.1.1:1234
+ }
+}
+EOF
+	if [ $? -ne 0 ]; then
+		echo "SKIP: Could not add dnat rules"
+		[ $ret -eq 0 ] && ret=$ksft_skip
+		return $ksft_skip
+	fi
+
+	local udpdaddr="10.0.2.1"
+	for i in 1 2;do
+		echo "PING $udpdaddr" > "$INFILE"
+		echo "PONG 10.0.1.1 step $i" | ip netns exec "$ns0" timeout 3 socat STDIO UDP4-LISTEN:1234,bind=10.0.1.1 > "$OUTFILE" 2>/dev/null &
+		local lpid=$!
+
+		busywait $BUSYWAIT_TIMEOUT listener_ready "$ns0" 1234 "-u"
+
+		result=$(ip netns exec "$ns1" timeout 3 socat STDIO UDP4-SENDTO:"$udpdaddr:1234,sourceport=4321" < "$INFILE")
+		udpdaddr="10.0.1.1"
+
+		if [ "$result" != "PONG 10.0.1.1 step $i" ] ; then
+			echo "ERROR: failed to test udp $ns1 to $ns2 with dnat rule step $i, result: \"$result\"" 1>&2
+			lret=1
+			ret=1
+		fi
+
+		wait
+
+		file_cmp "$INFILE" "$OUTFILE" "udp dnat step $i" || lret=1
+
+		:> "$OUTFILE"
+	done
+
+	test $lret -eq 0 && echo "PASS: IP dnat clash $ns1:$ns2"
+
+	ip netns exec "$ns0" nft flush ruleset
+
+	return $lret
+}
+
 # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99
 for i in "$ns0" "$ns1" "$ns2" ;do
 ip netns exec "$i" nft -f /dev/stdin <<EOF
@@ -1147,6 +1217,7 @@ $test_inet_nat && test_redirect6 inet
 
 test_port_shadowing
 test_stateless_nat_ip
+test_dnat_clash
 
 if [ $ret -ne 0 ];then
 	echo -n "FAIL: "
Signature · 1 line
2.30.2