net: ftgmac100: Add SoC reset support for RMII mode
Subsystems (5)
v4 cover net: ftgmac100: Add SoC reset support for RMII mode
This patch series adds support for an optional reset line to the ftgmac100 ethernet controller, as used on Aspeed SoCs. On these SoCs, the internal MAC reset is not sufficient to reset the RMII interface. By providing a SoC-level reset via the device tree "resets" property, the driver can properly reset both the MAC and RMII logic, ensuring correct operation in RMII mode.
The series includes:
- Device tree binding update to document the new "resets" property.
- Addition of MAC1/2/3/4 reset definitions for AST2600.
- Device tree changes for AST2600 to use the new reset properties.
- Driver changes to assert/deassert the reset line as needed.
This improves reliability and initialization of the MAC in RMII mode on Aspeed platforms.
Jacky Chou (4):
dt-bindings: net: ftgmac100: Add resets property
dt-bindings: clock: ast2600: Add reset definitions for MAC1 and MAC2
ARM: dts: aspeed-g6: Add resets property for MAC controllers
net: ftgmac100: Add optional reset control for RMII mode on Aspeed
SoCs
.../bindings/net/faraday,ftgmac100.yaml | 21 ++++++++++++--- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 +++ drivers/net/ethernet/faraday/ftgmac100.c | 26 +++++++++++++++++++ include/dt-bindings/clock/ast2600-clock.h | 2 ++ 4 files changed, 50 insertions(+), 3 deletions(-)
---
v4:
- Added more useful commit messages to faraday,ftgmac100.yaml.
v3:
- Fixed allOf in faraday,ftgmac100.yaml.
v2:
- Added restriction on resets property in faraday,ftgmac100.yaml.
---
Signature · 1 line
2.34.1
PATCH v4 1/4 dt-bindings: net: ftgmac100: Add resets property
In Aspeed AST2600 design, the MAC internal delay on MAC register cannot fully reset the RMII interfaces, it may cause the RMII incompletely. Therefore, we need to add resets property to do SoC-level reset line to reset the whole MAC function that includes ftgmac, RGMII and RMII.
--- .../bindings/net/faraday,ftgmac100.yaml | 21 ++++++++++++++++--- 1 file changed, 18 insertions(+), 3 deletions(-)
Documentation/devicetree/bindings/net/faraday,ftgmac100.yaml +18 -3
@@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Faraday Technology FTGMAC100 gigabit ethernet controller -allOf: - - $ref: ethernet-controller.yaml# - maintainers: - Po-Yu Chuang <[email protected]>
@@ -35,6 +32,9 @@ properties: - description: MAC IP clock - description: RMII RCLK gate for AST2500/2600 + resets: + maxItems: 1 + clock-names: minItems: 1 items:
@@ -74,6 +74,21 @@ required: - reg - interrupts +allOf: + - $ref: ethernet-controller.yaml# + - if: + properties: + compatible: + contains: + enum: + - aspeed,ast2600-mac + then: + properties: + resets: true + else: + properties: + resets: false + unevaluatedProperties: false examples:
Signature · 1 line
2.34.1
Re: [net-next v4 1/4] dt-bindings: net: ftgmac100: Add resets property
Quoted 8 lines · Jacky Chou
In Aspeed AST2600 design, the MAC internal delay on MAC register cannot fully reset the RMII interfaces, it may cause the RMII incompletely. Therefore, we need to add resets property to do SoC-level reset line to reset the whole MAC function that includes ftgmac, RGMII and RMII.
Signed-off-by Jacky Chou <[email protected]>--- .../bindings/net/faraday,ftgmac100.yaml | 21 ++++++++++++++++---
Best regards,
Krzysztof
PATCH v4 2/4 dt-bindings: clock: ast2600: Add reset definitions for MAC1 and MAC2
In reply to Jacky ChouAdd ASPEED_RESET_MAC1 and ASPEED_RESET_MAC2 reset definitions to the ast2600-clock binding header. These are required for proper reset control of the MAC1 and MAC2 ethernet controllers on the AST2600 SoC.
--- include/dt-bindings/clock/ast2600-clock.h | 2 ++ 1 file changed, 2 insertions(+)
include/dt-bindings/clock/ast2600-clock.h +2 -0
@@ -122,6 +122,8 @@#define ASPEED_RESET_PCIE_DEV_OEN 20#define ASPEED_RESET_PCIE_RC_O 19#define ASPEED_RESET_PCIE_RC_OEN 18 +#define ASPEED_RESET_MAC2 12 +#define ASPEED_RESET_MAC1 11#define ASPEED_RESET_PCI_DP 5#define ASPEED_RESET_HACE 4#define ASPEED_RESET_AHB 1
Signature · 1 line
2.34.1
PATCH v4 3/4 ARM: dts: aspeed-g6: Add resets property for MAC controllers
In reply to Jacky ChouAdd the "resets" property to the MAC nodes in the AST2600 device tree, using the appropriate ASPEED_RESET_MACx definitions.
--- arch/arm/boot/dts/aspeed/aspeed-g6.dtsi | 4 ++++ 1 file changed, 4 insertions(+)
arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +4 -0
@@ -236,6 +236,7 @@ mac0: ethernet@1e660000 { reg = <0x1e660000 0x180>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>; + resets = <&syscon ASPEED_RESET_MAC1>; status = "disabled"; };
@@ -244,6 +245,7 @@ mac1: ethernet@1e680000 { reg = <0x1e680000 0x180>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC2CLK>; + resets = <&syscon ASPEED_RESET_MAC2>; status = "disabled"; };
@@ -252,6 +254,7 @@ mac2: ethernet@1e670000 { reg = <0x1e670000 0x180>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC3CLK>; + resets = <&syscon ASPEED_RESET_MAC3>; status = "disabled"; };
@@ -260,6 +263,7 @@ mac3: ethernet@1e690000 { reg = <0x1e690000 0x180>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; clocks = <&syscon ASPEED_CLK_GATE_MAC4CLK>; + resets = <&syscon ASPEED_RESET_MAC4>; status = "disabled"; };
Signature · 1 line
2.34.1
PATCH v4 4/4 net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs
In reply to Jacky ChouOn Aspeed SoCs, the internal MAC reset is insufficient to fully reset the RMII interface; only the SoC-level reset line can properly reset the RMII logic. This patch adds support for an optional "resets" property in the device tree, allowing the driver to assert and deassert the SoC reset line when operating in RMII mode. This ensures the MAC and RMII interface are correctly reset and initialized.
--- drivers/net/ethernet/faraday/ftgmac100.c | 26 ++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
drivers/net/ethernet/faraday/ftgmac100.c +26 -0
@@ -9,6 +9,7 @@#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt#include <linux/clk.h> +#include <linux/reset.h> #include <linux/dma-mapping.h> #include <linux/etherdevice.h> #include <linux/ethtool.h>
@@ -101,6 +102,8 @@ struct ftgmac100 {/* AST2500/AST2600 RMII ref clock gate */ struct clk *rclk; +/* Aspeed reset control */ +struct reset_control *rst;/* Link management */ int cur_speed;
@@ -148,6 +151,23 @@ static int ftgmac100_reset_and_config_mac(struct ftgmac100 *priv) {u32 maccr =0 ; +/* Aspeed RMII needs SCU reset to clear status */ +if (priv->is_aspeed && priv->netdev->phydev->interface ==PHY_INTERFACE_MODE_RMII ) { +int err; + + err =reset_control_assert (priv->rst); +if (err) { +dev_err (priv->dev,"Failed to reset mac (%d)\n" , err); +return err; + } +usleep_range (10000 ,20000 ); + err =reset_control_deassert (priv->rst); +if (err) { +dev_err (priv->dev,"Failed to deassert mac reset (%d)\n" , err); +return err; + } + } +switch (priv->cur_speed) {case SPEED_10 :case 0 :/* no link */
@@ -1968,6 +1988,12 @@ static int ftgmac100_probe(struct platform_device *pdev) } + priv->rst =devm_reset_control_get_optional_exclusive (priv->dev,NULL ); +if (IS_ERR (priv->rst)) { + err =PTR_ERR (priv->rst); + goto err_phy_connect; + } +if (priv->is_aspeed) { err =ftgmac100_setup_clk (priv);if (err)
Signature · 1 line
2.34.1
Re: [net-next v4 4/4] net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs
Quoted 8 lines · Jacky Chou
On Aspeed SoCs, the internal MAC reset is insufficient to fully reset the RMII interface; only the SoC-level reset line can properly reset the RMII logic. This patch adds support for an optional "resets" property in the device tree, allowing the driver to assert and deassert the SoC reset line when operating in RMII mode. This ensures the MAC and RMII interface are correctly reset and initialized.
Signed-off-by Jacky Chou <[email protected]>
Andrew
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:
Quoted 8 lines · On Wed, 9 Jul 2025 15:08:05 +0800 you wrote:
This patch series adds support for an optional reset line to the ftgmac100 ethernet controller, as used on Aspeed SoCs. On these SoCs, the internal MAC reset is not sufficient to reset the RMII interface. By providing a SoC-level reset via the device tree "resets" property, the driver can properly reset both the MAC and RMII logic, ensuring correct operation in RMII mode.
[...]
Here is the summary with links:
- [net-next,v4,1/4] dt-bindings: net: ftgmac100: Add resets property
https://git.kernel.org/netdev/net-next/c/fc6c8af6d784 - [net-next,v4,2/4] dt-bindings: clock: ast2600: Add reset definitions for MAC1 and MAC2 https://git.kernel.org/netdev/net-next/c/4dc5f7b2c0cc - [net-next,v4,3/4] ARM: dts: aspeed-g6: Add resets property for MAC controllers (no matching commit) - [net-next,v4,4/4] net: ftgmac100: Add optional reset control for RMII mode on Aspeed SoCs https://git.kernel.org/netdev/net-next/c/af350ee72e9d
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html