arm64: dts: qcom: qcs6490-rb3gen2: Add missing clkreq pinctrl property
PATCH 1/1 arm64: dts: qcom: qcs6490-rb3gen2: Add missing clkreq pinctrl property
Add the missing clkreq pinctrl entry to the PCIe1 node. This ensures proper configuration of the CLKREQ# signal, which is needed for proper functioning of PCIe ASPM.
--- arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts +1 -1
@@ -811,7 +811,7 @@ &mdss_edp_phy { &pcie1 { perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; - pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>; + pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>; pinctrl-names = "default"; iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
---
base-commit: e2291551827fe5d2d3758c435c191d32b6d1350e
change-id: 20250717-clkreq-92379d031869
Best regards,
Signature · 1 line
Krishna Chaitanya Chundru <[email protected]>
Quoted 6 lines · Krishna Chaitanya Chundru
Add the missing clkreq pinctrl entry to the PCIe1 node. This ensures proper configuration of the CLKREQ# signal, which is needed for proper functioning of PCIe ASPM.
Signed-off-by Krishna Chaitanya Chundru <[email protected]>---
Konrad
Quoted 5 lines · Krishna Chaitanya Chundru
Add the missing clkreq pinctrl entry to the PCIe1 node. This ensures proper configuration of the CLKREQ# signal, which is needed for proper functioning of PCIe ASPM.
Applied, thanks!
[1/1] arm64: dts: qcom: qcs6490-rb3gen2: Add missing clkreq pinctrl property
commit: 84f3849d0526b22589dd5b4a5634ed4235a6ccf9
Best regards,
Signature · 1 line
Bjorn Andersson <[email protected]>