net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
Subsystems (4)
PATCH 1/1 net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations.
Fix this by masking the PHY address with 0x1f (31 decimal) to ensure it stays within the valid range.
--- drivers/net/usb/asix_devices.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/usb/asix_devices.c +1 -1
@@ -676,7 +676,7 @@ static int ax88772_init_mdio(struct usbnet *dev) priv->mdio->read = &asix_mdio_bus_read; priv->mdio->write = &asix_mdio_bus_write; priv->mdio->name ="Asix MDIO Bus" ; - priv->mdio->phy_mask = ~(BIT (priv->phy_addr) |BIT (AX_EMBD_PHY_ADDR )); + priv->mdio->phy_mask = ~(BIT (priv->phy_addr &0x1f ) |BIT (AX_EMBD_PHY_ADDR ));/* mii bus name is usb-<usb bus number>-<usb device number> */ snprintf (priv->mdio->id,MII_BUS_ID_SIZE ,"usb-%03d:%03d" , dev->udev->bus->busnum, dev->udev->devnum);
Signature · 1 line
2.43.5
Quoted 6 lines · Yuichiro Tsuji
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations.
Quoted 8 lines
Fix this by masking the PHY address with
0x1f(31 decimal) to ensure it stays within the valid range.Fixes 4faff70959d5 ("net: usb: asix_devices: add phy_mask for ax88772 mdio bus")Reported-by [email protected]Tested-by [email protected]Signed-off-by Yuichiro Tsuji <[email protected]>
Andrew
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:
Hello:
This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:
Quoted 10 lines · On Mon, 18 Aug 2025 17:45:07 +0900 you wrote:
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this mask, invalid PHY addresses could be used, potentially causing issues with MDIO bus operations.
Fix this by masking the PHY address with
0x1f(31 decimal) to ensure it stays within the valid range.[...]
Here is the summary with links:
- net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
https://git.kernel.org/netdev/net/c/24ef2f53c07f
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html