ARM: mach-hpe: Rework support and directory structure
Subsystems (2)
PATCH 1/1 ARM: mach-hpe: Rework support and directory structure
Having a platform need a mach-* directory should be seen as a negative, it means the platform needs special non-standard handling. ARM64 support does not allow mach-* directories at all. While we may not get to that given all the non-standard architectures we support, we should still try to get as close as we can and reduce the number of mach directories.
The mach-hpe/ directory and files, provides just one "feature":
having the kernel print the machine name if the DTB does not also contain a "model" string (which they always do). To reduce the number of mach-* directories let's do without that feature and remove this directory.
Note, we drop the l2c_aux_mask = ~0 line, but this is safe as the fallback GENERIC_DT machine has that as the default.
---
Changes for v3:
- Rebased on v6.17-rc1
Changes for v2:
- Rebased on v6.13-rc1
MAINTAINERS | 1 - arch/arm/Kconfig | 2 -- arch/arm/Kconfig.platforms | 25 +++++++++++++++++++++++++ arch/arm/Makefile | 1 - arch/arm/mach-hpe/Kconfig | 23 ----------------------- arch/arm/mach-hpe/Makefile | 1 - arch/arm/mach-hpe/gxp.c | 15 --------------- 7 files changed, 25 insertions(+), 43 deletions(-) delete mode 100644 arch/arm/mach-hpe/Kconfig delete mode 100644 arch/arm/mach-hpe/Makefile delete mode 100644 arch/arm/mach-hpe/gxp.c
MAINTAINERS +0 -1
@@ -2728,7 +2728,6 @@ F: Documentation/devicetree/bindings/spi/hpe,gxp-spifi.yaml F: Documentation/devicetree/bindings/timer/hpe,gxp-timer.yaml F: Documentation/hwmon/gxp-fan-ctrl.rst F: arch/arm/boot/dts/hpe/ -F: arch/arm/mach-hpe/ F: drivers/clocksource/timer-gxp.c F: drivers/hwmon/gxp-fan-ctrl.c F: drivers/i2c/busses/i2c-gxp.c
arch/arm/Kconfig +0 -2
@@ -393,8 +393,6 @@ source "arch/arm/mach-highbank/Kconfig" source "arch/arm/mach-hisi/Kconfig" -source "arch/arm/mach-hpe/Kconfig" - source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-ixp4xx/Kconfig"
arch/arm/Kconfig.platforms +25 -0
@@ -87,6 +87,31 @@ config MACH_ASM9260 help Support for Alphascale ASM9260 based platform. +menuconfig ARCH_HPE + bool "HPE SoC support" + depends on ARCH_MULTI_V7 + help + This enables support for HPE ARM based BMC chips. + +if ARCH_HPE + +config ARCH_HPE_GXP + bool "HPE GXP SoC" + depends on ARCH_MULTI_V7 + select ARM_VIC + select GENERIC_IRQ_CHIP + select CLKSRC_MMIO + help + HPE GXP is the name of the HPE Soc. This SoC is used to implement many + BMC features at HPE. It supports ARMv7 architecture based on the Cortex + A9 core. It is capable of using an AXI bus to which a memory controller + is attached. It has multiple SPI interfaces to connect boot flash and + BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It + has multiple i2c engines to drive connectivity with a host + infrastructure. + +endif + menuconfig ARCH_MOXART bool "MOXA ART SoC" depends on ARCH_MULTI_V4
arch/arm/Makefile +0 -1
@@ -189,7 +189,6 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE) += footbridge machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_HISI) += hisi -machine-$(CONFIG_ARCH_HPE) += hpe machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone machine-$(CONFIG_ARCH_LPC18XX) += lpc18xx
arch/arm/mach-hpe/Kconfig deleted +0 -23
@@ -1,23 +0,0 @@ -menuconfig ARCH_HPE - bool "HPE SoC support" - depends on ARCH_MULTI_V7 - help - This enables support for HPE ARM based BMC chips. -if ARCH_HPE - -config ARCH_HPE_GXP - bool "HPE GXP SoC" - depends on ARCH_MULTI_V7 - select ARM_VIC - select GENERIC_IRQ_CHIP - select CLKSRC_MMIO - help - HPE GXP is the name of the HPE Soc. This SoC is used to implement many - BMC features at HPE. It supports ARMv7 architecture based on the Cortex - A9 core. It is capable of using an AXI bus to which a memory controller - is attached. It has multiple SPI interfaces to connect boot flash and - BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It - has multiple i2c engines to drive connectivity with a host - infrastructure. - -endif
arch/arm/mach-hpe/Makefile deleted +0 -1
@@ -1 +0,0 @@ -obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
arch/arm/mach-hpe/gxp.c deleted +0 -15
@@ -1,15 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */ - -#include <asm/mach/arch.h> - -static const char *const gxp_board_dt_compat[] = { -"hpe,gxp" , -NULL , -}; - -DT_MACHINE_START (GXP_DT ,"HPE GXP" ) - .dt_compat = gxp_board_dt_compat, - .l2c_aux_val = 0, - .l2c_aux_mask = ~0 , -MACHINE_END
Signature · 1 line
2.39.2
This patch was applied to soc/soc.git (for-next) by Arnd Bergmann <[email protected]>:
Hello:
This patch was applied to soc/soc.git (for-next)
by Arnd Bergmann <[email protected]>:
Quoted 6 lines · On Wed, 13 Aug 2025 12:03:08 -0500 you wrote:
Having a platform need a mach-* directory should be seen as a negative, it means the platform needs special non-standard handling. ARM64 support does not allow mach-* directories at all. While we may not get to that given all the non-standard architectures we support, we should still try to get as close as we can and reduce the number of mach directories.
Quoted 6 lines
The mach-hpe/ directory and files, provides just one "feature":
having the kernel print the machine name if the DTB does not also contain a "model" string (which they always do). To reduce the number of mach-* directories let's do without that feature and remove this directory.[...]
Here is the summary with links:
- ARM: mach-hpe: Rework support and directory structure
https://git.kernel.org/soc/soc/c/9685b2975972
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html