Add support for the Renesas RZ/N1 ADC
Herve Codina (Schneider Electric)
maintainerv2 cover Add support for the Renesas RZ/N1 ADC
Hi,
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family.
It can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are handled through ADC controller virtual channels.
Best regards,
Herve Codina
Changes v1 -> v2:
v1: https://lore.kernel.org/lkml/[email protected]/
Rebase on top of v6.18-rc3 to have commit db82b8dbf5f0 ("PM: runtime:
Fix conditional guard definitions")
Patch 1:
- Remove unneeded 'dependencies' part.
- Rename "adc-clk" clock to "adc".
- Move 'additionalProperties: false' just before the example.
- Use const instead of enum for the "renesas,r9a06g032-adc" compatible string.
- Fix the ACD typo.
Patch 2:
- Fix the ACD typo.
- Rename "adc-clk" clock to "adc".
- Update included headers and sort them.
- Align register definitions at the same column.
- Inline the FIELD_GET() instead of having macros.
- Introduce RZN1_ADC_NO_CHANNEL
- Get Vref voltage value at probe().
- Remove the bitmap in rzn1_adc_set_iio_dev_channels().
- Use dev_err_probe() in rzn1_adc_set_iio_dev_channels().
- Use auto-cleanup variant for PM runtime "resume and get".
- Use scoped_guard() for mutex.
- Use devm_mutex_init().
- Use the fixed "rzn1-adc" string for indio_dev->name.
- Use DEFINE_RUNTIME_DEV_PM_OPS().
- Fix rzn1_adc_of_match table and remove of_match_ptr().
- Add a comment related to decoupling between IIO chans and ADC1 or ADC2 core chans
- Update and add several comments related to ADC core usage and the relationship with ADC core regulator presence.
- Remove clocks and regulators handling from PM runtime suspend()/remove().
- Simplify the driver removing the no more relevant struct rzn1_adc_core.
Patch 3:
- Rename "adc-clk" clock to "adc".
- Add 'Reviewed-by: Wolfram Sang'
Patch 4
- Removed the linux-iio list
Herve Codina (Schneider Electric) (4):
dt-bindings: iio: adc: Add the Renesas RZ/N1 ADC
iio: adc: Add support for the Renesas RZ/N1 ADC
ARM: dts: renesas: r9a06g032: Add the ADC device
MAINTAINERS: Add the Renesas RZ/N1 ADC driver entry
.../bindings/iio/adc/renesas,rzn1-adc.yaml | 111 ++++ MAINTAINERS | 7 + arch/arm/boot/dts/renesas/r9a06g032.dtsi | 10 + drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/rzn1-adc.c | 493 ++++++++++++++++++ 6 files changed, 632 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml create mode 100644 drivers/iio/adc/rzn1-adc.c
Signature · 1 line
2.51.0
Herve Codina (Schneider Electric)
maintainerPATCH v2 1/4 dt-bindings: iio: adc: Add the Renesas RZ/N1 ADC
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family.
--- .../bindings/iio/adc/renesas,rzn1-adc.yaml | 111 ++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml new file +111 -0
@@ -0,0 +1,111 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/renesas,rzn1-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas RZ/N1 Analog to Digital Converter (ADC) + +maintainers: + - Herve Codina <[email protected]> + +description: + The Renesas RZ/N1 ADC controller available in the Renesas RZ/N1 SoCs family + can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are + handled through ADC controller virtual channels. + +properties: + compatible: + items: + - const: renesas,r9a06g032-adc # RZ/N1D + - const: renesas,rzn1-adc + + reg: + maxItems: 1 + + clocks: + items: + - description: APB internal bus clock + - description: ADC clock + + clock-names: + items: + - const: pclk + - const: adc + + power-domains: + maxItems: 1 + + adc1-avdd-supply: + description: + ADC1 analog power supply. + + adc1-vref-supply: + description: + ADC1 reference voltage supply. + + adc2-avdd-supply: + description: + ADC2 analog power supply. + + adc2-vref-supply: + description: + ADC2 reference voltage supply. + + '#io-channel-cells': + const: 1 + description: | + Channels numbers available: + if ADC1 is used (i.e. adc1-{avdd,vref}-supply present): + - 0: ADC1 IN0 + - 1: ADC1 IN1 + - 2: ADC1 IN2 + - 3: ADC1 IN3 + - 4: ADC1 IN4 + - 5: ADC1 IN6 + - 6: ADC1 IN7 + - 7: ADC1 IN8 + if ADC2 is used (i.e. adc2-{avdd,vref}-supply present): + - 8: ADC2 IN0 + - 9: ADC2 IN1 + - 10: ADC2 IN2 + - 11: ADC2 IN3 + - 12: ADC2 IN4 + - 13: ADC2 IN6 + - 14: ADC2 IN7 + - 15: ADC2 IN8 + +required: + - compatible + - reg + - clocks + - clock-names + - power-domains + - '#io-channel-cells' + +# At least one of avvd/vref supplies +anyOf: + - required: + - adc1-vref-supply + - adc1-avdd-supply + - required: + - adc2-vref-supply + - adc2-avdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/r9a06g032-sysctrl.h> + + adc: adc@40065000 { + compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc"; + reg = <0x40065000 0x200>; + clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>; + clock-names = "pclk", "adc"; + power-domains = <&sysctrl>; + adc1-avdd-supply = <&adc1_avdd>; + adc1-vref-supply = <&adc1_vref>; + #io-channel-cells = <1>; + }; +...
Signature · 1 line
2.51.0
Re: [PATCH v2 1/4] dt-bindings: iio: adc: Add the Renesas RZ/N1 ADC
Quoted 9 lines · Herve Codina (Schneider Electric)
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family.
Signed-off-by Herve Codina (Schneider Electric) <[email protected]>--- .../bindings/iio/adc/renesas,rzn1-adc.yaml | 111 ++++++++++++++++++ 1 file changed, 111 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml
Herve Codina (Schneider Electric)
maintainerPATCH v2 2/4 iio: adc: Add support for the Renesas RZ/N1 ADC
In reply to Herve Codina (Schneider Electric)The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are not directly accessed but are handled through ADC controller virtual channels.
--- drivers/iio/adc/Kconfig | 10 + drivers/iio/adc/Makefile | 1 + drivers/iio/adc/rzn1-adc.c | 493 +++++++++++++++++++++++++++++++++++++ 3 files changed, 504 insertions(+) create mode 100644 drivers/iio/adc/rzn1-adc.c
drivers/iio/adc/Kconfig +10 -0
@@ -1403,6 +1403,16 @@ config RZG2L_ADC To compile this driver as a module, choose M here: the module will be called rzg2l_adc. +config RZN1_ADC + tristate "Renesas RZ/N1 ADC driver" + depends on ARCH_RZN1 || COMPILE_TEST + help + Say yes here to build support for the ADC found in Renesas + RZ/N1 family. + + To compile this driver as a module, choose M here: the + module will be called rzn1-adc. + config SC27XX_ADC tristate "Spreadtrum SC27xx series PMICs ADC" depends on MFD_SC27XX_PMIC || COMPILE_TEST
drivers/iio/adc/Makefile +1 -0
@@ -123,6 +123,7 @@ obj-$(CONFIG_ROHM_BD79112) += rohm-bd79112.o obj-$(CONFIG_ROHM_BD79124) += rohm-bd79124.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o +obj-$(CONFIG_RZN1_ADC) += rzn1-adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o obj-$(CONFIG_SOPHGO_CV1800B_ADC) += sophgo-cv1800b-adc.o
drivers/iio/adc/rzn1-adc.c new file +493 -0
493 lines not on this page · raw message
Signature · 1 line
2.51.0
Re: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC
Quoted 4 lines · Herve Codina (Schneider Electric)
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are not directly accessed but are handled through ADC controller virtual channels.
Looks much better, thanks! My comments below.
...
+ array_size,h
drivers/iio/adc/rzn1-adc.c line 17
Quoted 4 lines
drivers/iio/adc/rzn1-adc.c new file +4
-0+#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/cleanup.h> +#include <linux/clk.h>
+ dev_printk.h
+ err.h
drivers/iio/adc/rzn1-adc.c line 22
Quoted 5 lines
drivers/iio/adc/rzn1-adc.c new file +5
-0+#include <linux/iio/iio.h> +#include <linux/io.h> +#include <linux/iopoll.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h>
+ mutex.h
drivers/iio/adc/rzn1-adc.c line 25
Quoted 3 lines
drivers/iio/adc/rzn1-adc.c new file +3
-0+#include <linux/platform_device.h> +#include <linux/pm_runtime.h> +#include <linux/regulator/consumer.h>
+ types.h
...
Quoted 1 line
+#define
RZN1_ADC_CONTROL_REG0x2c
I would go with fixed-width values, e.g., 0x02c for the register definitions.
Quoted 13 lines
drivers/iio/adc/rzn1-adc.c new file +10
-0+#define RZN1_ADC_CONTROL_ADC_BUSY BIT(6) + +#define RZN1_ADC_FORCE_REG 0x30 +#define RZN1_ADC_SET_FORCE_REG 0x34 +#define RZN1_ADC_CLEAR_FORCE_REG 0x38 +#define RZN1_ADC_CONFIG_REG 0x40 + +#define RZN1_ADC_VC_REG (_n) (0xc0 + 4 * (_n)) +#define RZN1_ADC_ADC1_DATA_REG (_n) (0x100 + 4 * (_n)) +#define RZN1_ADC_ADC2_DATA_REG (_n) (0x140 + 4 * (_n))
...
drivers/iio/adc/rzn1-adc.c line 277
Quoted 6 lines
drivers/iio/adc/rzn1-adc.c new file +6
-0+static int rzn1_adc_get_vref_mv (struct rzn1_adc *rzn1_adc,unsigned int chan) +{ +/* +* chan 0..7 use ADC1 ch 0..7. Vref related to ADC1 core +* chan 8..15 use ADC2 ch 0..7. Vref related to ADC2 core +*/
Split it to two one line comments per each conditional.
drivers/iio/adc/rzn1-adc.c line 280
Quoted 3 lines
drivers/iio/adc/rzn1-adc.c new file +3
-0+if (chan <8 ) +return rzn1_adc->adc1_vref_mv; +else if (chan <16 )
Redundant 'else'.
Quoted 4 lines
drivers/iio/adc/rzn1-adc.c new file +4
-0+return rzn1_adc->adc2_vref_mv; + +return -EINVAL ; +}
...
Quoted 16 lines
drivers/iio/adc/rzn1-adc.c new file +16
-0+static int rzn1_adc_read_raw (struct iio_dev *indio_dev,struct iio_chan_spec const *chan, +int *val,int *val2,long mask) +{ +struct rzn1_adc *rzn1_adc =iio_priv (indio_dev); +int ret; + +switch (mask) { +case IIO_CHAN_INFO_RAW : + ret =rzn1_adc_read_raw_ch (rzn1_adc, chan->channel, val); +if (ret) +return ret; +return IIO_VAL_INT ; + +case IIO_CHAN_INFO_SCALE : + ret =rzn1_adc_get_vref_mv (rzn1_adc, chan->channel); +if (ret <0 )
drivers/iio/adc/rzn1-adc.c line 311
Quoted 10 lines
drivers/iio/adc/rzn1-adc.c new file +9
-0+return ret; + *val = ret; + *val2 =12 ; +return IIO_VAL_FRACTIONAL_LOG2 ; +default : +break ; + } + +return -EINVAL ;
default: return -EINVAL;
Quoted 1 line
+}
...
drivers/iio/adc/rzn1-adc.c line 315
Quoted 2 lines
drivers/iio/adc/rzn1-adc.c new file +2
-0+static const struct iio_info rzn1_adc_info = { + .read_raw = &rzn1_adc_read_raw
Leave trailing comma, this is not a terminator entry.
Quoted 1 line
+};
...
drivers/iio/adc/rzn1-adc.c line 326
Quoted 1 line
drivers/iio/adc/rzn1-adc.c new file +1
-0+if (rzn1_adc->adc1_vref_mv >=0 ) {
Can we call it _mV?
...
Review
Quoted 1 line
(quoted diff) +1
-0+ if (rzn1_adc->adc2_vref_mv >= 0) {
Ditto.
...
drivers/iio/adc/rzn1-adc.c line 375
Quoted 8 lines
drivers/iio/adc/rzn1-adc.c new file +8
-0+ ret =devm_regulator_get_enable_optional (dev, avdd_name); +if (ret <0 ) { +if (ret != -ENODEV ) +return dev_err_probe (dev, ret, +"Failed to get '%s' regulator\n" , + avdd_name); +return 0 ; + }
if (ret == -ENODEV) return dev_err_probe(); // takes less LoCs if (ret < 0) // do we need ' < 0' part? return 0;
drivers/iio/adc/rzn1-adc.c line 384
Quoted 8 lines
drivers/iio/adc/rzn1-adc.c new file +8
-0+ ret =devm_regulator_get_enable_read_voltage (dev, vref_name); +if (ret <0 ) { +if (ret != -ENODEV ) +return dev_err_probe (dev, ret, +"Failed to get '%s' regulator\n" , + vref_name); +return 0 ; + }
In the same way as above.
...
drivers/iio/adc/rzn1-adc.c line 473
Quoted 3 lines
drivers/iio/adc/rzn1-adc.c new file +3
-0+static DEFINE_RUNTIME_DEV_PM_OPS(rzn1_adc_pm_ops, + rzn1_adc_pm_runtime_suspend, + rzn1_adc_pm_runtime_resume, NULL);
Please, split it based on logic:
static DEFINE_RUNTIME_DEV_PM_OPS(rzn1_adc_pm_ops,
rzn1_adc_pm_runtime_suspend, rzn1_adc_pm_runtime_resume, NULL);
OR
static DEFINE_RUNTIME_DEV_PM_OPS(rzn1_adc_pm_ops,
rzn1_adc_pm_runtime_suspend, rzn1_adc_pm_runtime_resume, NULL);
Signature · 2 lines
With Best Regards, Andy Shevchenko
Jonathan Cameron
maintainerRe: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC
Quoted 7 lines · On Thu, 30 Oct 2025 11:00:12 +0200 Andy Shevchenko…
Quoted 4 lines · Herve Codina (Schneider Electric)
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are not directly accessed but are handled through ADC controller virtual channels.
Looks much better, thanks! My comments below.
FWIW I took a look as well but found the only things I noticed were a small subset of Andy's much more thorough review ;)
Jonathan
Herve Codina
maintainerRe: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC
In reply to Andy ShevchenkoHi Andy,
On Thu, 30 Oct 2025 11:00:12 +0200
Andy Shevchenko <[email protected]> wrote:
...
Quoted 15 lines
drivers/iio/adc/rzn1-adc.c line 375
Quoted 9 lines
drivers/iio/adc/rzn1-adc.c new file +8
-0+ ret =devm_regulator_get_enable_optional (dev, avdd_name); +if (ret <0 ) { +if (ret != -ENODEV ) +return dev_err_probe (dev, ret, +"Failed to get '%s' regulator\n" , + avdd_name); +return 0 ; + }if (ret == -ENODEV) return dev_err_probe(); // takes less LoCs if (ret < 0) // do we need ' < 0' part? return 0;
Well, I need to abort on error returned by devm_regulator_get_enable_optional() but I need also to filter out the ENODEV error.
ENODEV, returned by devm_regulator_get_enable_optional(), means that the regulator is not present. This should not be seen as an error by the caller. Indeed, the regulator is not present and so, the related ADC core will not be used. This is not an error from the caller perspective.
The code you proposed is not correct regarding this point.
Instead of my original code, I can propose the following:
if (ret < 0) {
if (ret == -ENODEV)
return 0;
return dev_err_probe(dev, ret,
"Failed to get '%s' regulator\n",
avdd_name);
}What do you think about it?
For other comments you have sent, I agree with them and I will take them into account in the next iteration.
Best regards,
Hervé
Re: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC
Quoted 2 lines · Herve Codina
On Thu, 30 Oct 2025 11:00:12 +0200
Andy Shevchenko <[email protected]> wrote:
...
Quoted 17 lines
Quoted 5 lines
Quoted 5 lines
drivers/iio/adc/rzn1-adc.c new file +5
-0+ ret =devm_regulator_get_enable_optional (dev, avdd_name); +if (ret <0 ) { +if (ret != -ENODEV ) + return dev_err_probe(dev, ret, + "Failed to get '%s' regulator\n",Quoted 8 lines
drivers/iio/adc/rzn1-adc.c line 375
Quoted 3 lines
drivers/iio/adc/rzn1-adc.c new file +3
-0+ avdd_name); +return 0 ; + }if (ret == -ENODEV) return dev_err_probe(); // takes less LoCs if (ret < 0) // do we need ' < 0' part? return 0;Well, I need to abort on error returned by
devm_regulator_get_enable_optional()but I need also to filter out the ENODEV error.
Quoted 6 lines
ENODEV, returned by
devm_regulator_get_enable_optional(), means that the regulator is not present. This should not be seen as an error by the caller. Indeed, the regulator is not present and so, the related ADC core will not be used. This is not an error from the caller perspective.The code you proposed is not correct regarding this point.
Yeah, sorry for that, but I think you got the idea...
The (working) solution should be like this:
if (ret == -ENODEV) return 0; if (ret < 0) // do we need ' < 0' part? return dev_err_probe(); // takes less LoCs
Quoted 11 lines
Instead of my original code, I can propose the following:
if (ret < 0) { if (ret == -ENODEV) return 0; return dev_err_probe(dev, ret, "Failed to get '%s' regulator\n", avdd_name); }What do you think about it?
Signature · 2 lines
With Best Regards, Andy Shevchenko
Re: [PATCH v2 2/4] iio: adc: Add support for the Renesas RZ/N1 ADC
In reply to Herve Codina (Schneider Electric)Quoted 7 lines · Herve Codina (Schneider Electric)
The Renesas RZ/N1 ADC controller is the ADC controller available in the Renesas RZ/N1 SoCs family. It can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are not directly accessed but are handled through ADC controller virtual channels.
Signed-off-by Herve Codina (Schneider Electric) <[email protected]>---
Not much to add to Andy's review. Looks in good shape... Just one small remark from me. With it and Andy's stuff addressed:
Quoted 57 lines
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +drivers/iio/adc/rzn1-adc.c| 493 +++++++++++++++++++++++++++++++++++++3 files changed, 504 insertions(+)create mode 100644
drivers/iio/adc/rzn1-adc.cdrivers/iio/adc/Kconfig +0
-0@@ -1403,6 +1403,16 @@ config RZG2L_ADCTo compile this driver as a module, choose M here: the module will be called
rzg2l_adc.drivers/iio/adc/Kconfig +10
-0+config RZN1_ADC + tristate "Renesas RZ/N1 ADC driver" + depends on ARCH_RZN1 || COMPILE_TEST + help + Say yes here to build support for the ADC found in Renesas + RZ/N1 family. + + To compile this driver as a module, choose M here: the + module will be called rzn1-adc. +config
SC27XX_ADC
tristate "Spreadtrum SC27xx series PMICs ADC" depends onMFD_SC27XX_PMIC||COMPILE_TESTdrivers/iio/adc/Makefile +0
-0@@ -123,6 +123,7 @@ obj-$(CONFIG_ROHM_BD79112) += rohm-bd79112.oobj-$(CONFIG_ROHM_BD79124) += rohm-bd79124.o obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o +obj-$(CONFIG_RZN1_ADC) += rzn1-adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o obj-$(CONFIG_SOPHGO_CV1800B_ADC) += sophgo-cv1800b-adc.o
drivers/iio/adc/rzn1-adc.c new file +12
-0@@ -0,0 +1,493 @@ +// SPDX-License-Identifier: GPL-2.0 +/* +* Renesas RZ/N1 ADC driver +* +* Copyright (C) 2025 Schneider-Electric +* +* Author: Herve Codina <[email protected]> +* +* The RZ/N1 ADC controller can handle channels from its internal ADC1 and/or +* ADC2 cores. The driver use ADC1 and/or ADC2 cores depending on the presence +* of the related power supplies (AVDD and VREF) description in the device-tree. +*/
...
drivers/iio/adc/rzn1-adc.c line 438
Quoted 4 lines
drivers/iio/adc/rzn1-adc.c new file +3
-0+ +platform_set_drvdata (pdev, indio_dev); +
If I'm not missing nothing, there's no real need to pass in indio_dev. So, why not passing rzn1_adc directly and avoid the pointer arithmetic's in the pm callbacks?
- Nuno Sá
Herve Codina (Schneider Electric)
maintainerPATCH v2 3/4 ARM: dts: renesas: r9a06g032: Add the ADC device
In reply to Herve Codina (Schneider Electric)The ADC available in the r9a06g032 SoC can use up to two internal ADC cores (ADC1 and ADC2) those internal cores are handled through ADC controller virtual channels.
Describe this device.
--- arch/arm/boot/dts/renesas/r9a06g032.dtsi | 10 ++++++++++ 1 file changed, 10 insertions(+)
arch/arm/boot/dts/renesas/r9a06g032.dtsi +10 -0
@@ -290,6 +290,16 @@ i2c2: i2c@40064000 { status = "disabled"; }; + adc: adc@40065000 { + compatible = "renesas,r9a06g032-adc", "renesas,rzn1-adc"; + reg = <0x40065000 0x200>; + clocks = <&sysctrl R9A06G032_HCLK_ADC>, <&sysctrl R9A06G032_CLK_ADC>; + clock-names = "pclk", "adc"; + power-domains = <&sysctrl>; + #io-channel-cells = <1>; + status = "disabled"; + }; + pinctrl: pinctrl@40067000 { compatible = "renesas,r9a06g032-pinctrl", "renesas,rzn1-pinctrl"; reg = <0x40067000 0x1000>, <0x51000000 0x480>;
Signature · 1 line
2.51.0
Herve Codina (Schneider Electric)
maintainerPATCH v2 4/4 MAINTAINERS: Add the Renesas RZ/N1 ADC driver entry
In reply to Herve Codina (Schneider Electric)After contributing the driver, add myself as the maintainer for the Renesas RZ/N1 ADC driver.
--- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
@@ -21900,6 +21900,13 @@ F: include/dt-bindings/net/pcs-rzn1-miic.h F: include/linux/pcs-rzn1-miic.h F: net/dsa/tag_rzn1_a5psw.c +RENESAS RZ/N1 ADC DRIVER +M: Herve Codina <[email protected]> +L: [email protected] +S: Supported +F: Documentation/devicetree/bindings/iio/adc/renesas,rzn1-adc.yaml +F: drivers/iio/adc/rzn1-adc.c + RENESAS RZ/N1 DWMAC GLUE LAYER M: Romain Gantois <[email protected]> S: Maintained
Signature · 1 line
2.51.0