Skip to contentSkip to conversation

firmware

DISCUSSION Michele 6 participants 12 messages Feb 15, 2009 – Feb 22, 2009 Media (V4L/DVB)

lore
Share & tools
lore

Michele

author
#0 lore raw

Hi,
I'm new here and i'm trying TM6061 driver from your repo. Actually I'm now able to make the module tm6000 and I find my card (wintv-hvr-900h) as card 9. But when today for the first time my gentoo system recognize it I discovered that I need a firmware called "xc3028L-v36.fw".
I searched a while over the net and it seems to be in vendor CD but it isn't,
even downloading drivers from webpage I find a sys file but it is not tridvid.sys, it is called hcw66xxx.sys (and also it seems to be a 64bit version called hcw66x64.sys). I tried both of them but nothing happend, I also try to find that file over internet but everytime file checks fail. Someone have some suggestion about where to find it?

Thanks
Michele

#1 lore raw
Quoted 12 lines · Michele

Hi,
I'm new here and i'm trying TM6061 driver from your repo. Actually I'm now able to make the module tm6000 and I find my card (wintv-hvr-900h) as card 9. But when today for the first time my gentoo system recognize it I discovered that I need a firmware called "xc3028L-v36.fw".
I searched a while over the net and it seems to be in vendor CD but it isn't,
even downloading drivers from webpage I find a sys file but it is not tridvid.sys, it is called hcw66xxx.sys (and also it seems to be a 64bit version called hcw66x64.sys). I tried both of them but nothing happend, I also try to find that file over internet but everytime file checks fail. Someone have some suggestion about where to find it?

Follow the rabbit: http://www.linuxtv.org/wiki/index.php/Firmware

#2 lore raw
Quoted 14 lines · CityK
Quoted 12 lines · Michele

Hi,
I'm new here and i'm trying TM6061 driver from your repo. Actually I'm now able to make the module tm6000 and I find my card (wintv-hvr-900h) as card 9. But when today for the first time my gentoo system recognize it I discovered that I need a firmware called "xc3028L-v36.fw".
I searched a while over the net and it seems to be in vendor CD but it isn't,
even downloading drivers from webpage I find a sys file but it is not tridvid.sys, it is called hcw66xxx.sys (and also it seems to be a 64bit version called hcw66x64.sys). I tried both of them but nothing happend, I also try to find that file over internet but everytime file checks fail. Someone have some suggestion about where to find it?

Quoted 6 lines

Follow the rabbit: http://www.linuxtv.org/wiki/index.php/Firmware
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

CityK,

That actually wasn't a very helpful link you sent. The user would have to know he has a Xceive 3028L tuner, and even if he had been able to figure that out, the page on the XC3028 and XC2028 pointed to on that page makes no reference to getting the firmware for the low power version of the chip.

Michele,

You can get the firmware here:

http://steventoth.net/linux/hvr1400/xc3028L-v36.fw

Devin

Signature · 3 lines
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller
#3 lore raw
Quoted 11 lines · Devin Heitmueller

CityK,

That actually wasn't a very helpful link you sent ... the page on the XC3028 and XC2028 pointed to on that page makes no reference to getting the firmware for the low power version of the chip.

Michele,

You can get the firmware here:

http://steventoth.net/linux/hvr1400/xc3028L-v36.fw

My apologies, I first off, didn't notice the low power chip, and, in any regard, even if I had, I was under the impression that it was documented there. I will amend that shortly.

Quoted 12 lines · Devin Heitmueller
Quoted 6 lines · CityK
Quoted 6 lines
Quoted 1 line · Michele

my gentoo system ... I need a firmware called "xc3028L-v36.fw"

Follow the rabbit: http://www.linuxtv.org/wiki/index.php/Firmware

CityK,
That actually wasn't a very helpful link you sent ... The user would have to know he has a Xceive 3028L tuner, and even if he had been able to figure that out,

I would hope that someone using Gentoo (hardly a hands off distro) would be sharp enough to know how to follow the rabbit down the hole ... although I'd advise that they avoid sipping from any vessel labelled with the words "Drink Me"

#4 lore raw
Quoted 32 lines · CityK
Quoted 11 lines · Devin Heitmueller

CityK,

That actually wasn't a very helpful link you sent ... the page on the XC3028 and XC2028 pointed to on that page makes no reference to getting the firmware for the low power version of the chip.

Michele,

You can get the firmware here:

http://steventoth.net/linux/hvr1400/xc3028L-v36.fw

My apologies, I first off, didn't notice the low power chip, and, in any regard, even if I had, I was under the impression that it was documented there. I will amend that shortly.

Quoted 12 lines · Devin Heitmueller
Quoted 6 lines · CityK
Quoted 6 lines
Quoted 1 line · Michele

my gentoo system ... I need a firmware called "xc3028L-v36.fw"

Follow the rabbit: http://www.linuxtv.org/wiki/index.php/Firmware

CityK,
That actually wasn't a very helpful link you sent ... The user would have to know he has a Xceive 3028L tuner, and even if he had been able to figure that out,

Quoted 5 lines

I would hope that someone using Gentoo (hardly a hands off distro) would be sharp enough to know how to follow the rabbit down the hole ... although I'd advise that they avoid sipping from any vessel labelled with the words "Drink Me"

CityK,

Thanks for taking the time to update the docs. Your efforts are appreciated.

Regards,

Devin

Signature · 3 lines
Devin J. Heitmueller
http://www.devinheitmueller.com
AIM: devinheitmueller
#5 lore raw
In reply to CityK
Quoted 11 lines · CityK
Quoted 5 lines · Devin Heitmueller

CityK,
That actually wasn't a very helpful link you sent ... The user would have to know he has a Xceive 3028L tuner, and even if he had been able to figure that out,

I would hope that someone using Gentoo (hardly a hands off distro) would be sharp enough to know how to follow the rabbit down the hole ... although I'd advise that they avoid sipping from any vessel labelled with the words "Drink Me"

I don't get you. What do you want for Gentoo? checking the wiki content about firmware?

Regards
Matthias

#6 lore raw
Quoted 1 line · Matthias Schwarzott

I don't get you.

I was having a little fun. My remarks contained references to Lewis Carroll's "Alice's Adventures in Wonderland".

Nowadays, the expression "follow the rabbit" (which, stemming from Alice's Adventures, is actually abbreviated from the act of following the rabbit down the hole) implies that one will discover something by following the metaphorical rabbit (which, in this case, was the link to wiki article on firmware, which itself contained links to the xc3028 IC family article).

Though perhaps not a particularly common expression, I'm sure that most are familiar with it or have come across it in other forms and presentations. Pop culture, for example, has many such references -- take the movie "The Matrix", for example, in which, IIRC, the character Morphieus invites Neo to "follow the rabbit"

Quoted 1 line

What do you want for Gentoo? checking the wiki content about firmware?

Gentoo is, typically, not associated as a beginners distro. It, generally speaking, requires or, at the very least, affords the user the opportunity to become more familiar with the underlining architecture and mechanics of the OS. One might be tempted to call that a discovery process.

Hence, when a Gentoo user like Michele states that they require a firmware entitled "xc3028L-v36.fw", I'm (rightly or wrongly) making an implicit assumption that they would be perceptive enough to make the relevant connection(s) and press forth when presented with a metaphorical rabbit.

#7 lore raw

--------------------------------------------------------------------
ASUS m3a78 mothorboard
AMD Athlon64 X2 Dual Core Processor 6000+ 3.1Ghz Gigabyte NVidia 9400gt Graphics adapter Kworld ATSC 110 TV Capture Card
Kworld ATSC 115 TV Capture Card
--------------------------------------------------------------------

Quoted 20 lines · CityK
Quoted 1 line · Matthias Schwarzott

I don't get you.

I was having a little fun. My remarks contained references to Lewis Carroll's "Alice's Adventures in Wonderland".

Nowadays, the expression "follow the rabbit" (which, stemming from Alice's Adventures, is actually abbreviated from the act of following the rabbit down the hole) implies that one will discover something by following the metaphorical rabbit (which, in this case, was the link to wiki article on firmware, which itself contained links to the xc3028 IC family article).

Though perhaps not a particularly common expression, I'm sure that most are familiar with it or have come across it in other forms and presentations. Pop culture, for example, has many such references -- take the movie "The Matrix", for example, in which, IIRC, the character Morphieus invites Neo to "follow the rabbit"

Quoted 7 lines
Quoted 1 line

What do you want for Gentoo? checking the wiki content about firmware?

Gentoo is, typically, not associated as a beginners distro. It, generally speaking, requires or, at the very least, affords the user the opportunity to become more familiar with the underlining architecture and mechanics of the OS. One might be tempted to call that a discovery process.

There is an ebuild "media-tv/linuxtv-dvb-firmware" that may have the required firmware.

Quoted 10 lines

Hence, when a Gentoo user like Michele states that they require a firmware entitled "xc3028L-v36.fw", I'm (rightly or wrongly) making an implicit assumption that they would be perceptive enough to make the relevant connection(s) and press forth when presented with a metaphorical rabbit.
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html

#8 lore raw
Quoted 8 lines · Jonathan Isom

--------------------------------------------------------------------
ASUS m3a78 mothorboard
AMD Athlon64 X2 Dual Core Processor 6000+ 3.1Ghz Gigabyte NVidia 9400gt Graphics adapter Kworld ATSC 110 TV Capture Card
Kworld ATSC 115 TV Capture Card
--------------------------------------------------------------------

Quoted 20 lines
Quoted 19 lines · CityK
Quoted 1 line · Matthias Schwarzott

I don't get you.

I was having a little fun. My remarks contained references to Lewis Carroll's "Alice's Adventures in Wonderland".

Nowadays, the expression "follow the rabbit" (which, stemming from Alice's Adventures, is actually abbreviated from the act of following the rabbit down the hole) implies that one will discover something by following the metaphorical rabbit (which, in this case, was the link to wiki article on firmware, which itself contained links to the xc3028 IC family article).

Though perhaps not a particularly common expression, I'm sure that most are familiar with it or have come across it in other forms and presentations. Pop culture, for example, has many such references -- take the movie "The Matrix", for example, in which, IIRC, the character Morphieus invites Neo to "follow the rabbit"

Ah yes, now it's clear.

Btw. I also had a longer look at the firmeware page in wiki and removed that note about gentoo using hotplug-scripts as that is false since a long time. CityK you are right, I think most (if not all) current distributions use udev to create device nodes and upload firmware into the kernel.

Yes this ebuild is there. But it is in some respect outdated, due to lack of maintaining. This ebuild fetches the original files get_dvb_firmware also fetches and the runs get_firmware to unpack them. (All this due to license/re-distribution issues as you all know).

But: These URLs tend to no longer work after some time, as manufacturers update their drivers or web-pages :(

So there should either be someone continuously updating them (in get_dvb_firmware and also here in copy).
Or: We find someone ignoring the licenses and hosting the extracted files somewhere.

Regards
Matthias

#9 lore raw

----- Original Nachricht ----

Quoted 6 lines · Matthias Schwarzott

Yes this ebuild is there. But it is in some respect outdated, due to lack of

maintaining. This ebuild fetches the original files get_dvb_firmware also fetches and the runs get_firmware to unpack them. (All this due to license/re-distribution issues as you all know).

Quoted 7 lines

But: These URLs tend to no longer work after some time, as manufacturers update their drivers or web-pages :(

So there should either be someone continuously updating them (in get_dvb_firmware and also here in copy).
Or: We find someone ignoring the licenses and hosting the extracted files somewhere.

The script "get_dvb_firmware" itself needs to be updated. I'm willing to work on this and update necessary links and test the script for some time here on Mandriva - as long as you're willing to help me with other distros and in the process.

Any tips how to begin please?

Kind regards,

schollsky

#10 lore raw
Quoted 26 lines · [email protected] wrote:

----- Original Nachricht ----

Quoted 6 lines · Matthias Schwarzott

Yes this ebuild is there. But it is in some respect outdated, due to lack of

maintaining. This ebuild fetches the original files get_dvb_firmware also fetches and the runs get_firmware to unpack them. (All this due to license/re-distribution issues as you all know).

Quoted 8 lines

But: These URLs tend to no longer work after some time, as manufacturers update their drivers or web-pages :(

So there should either be someone continuously updating them (in get_dvb_firmware and also here in copy).
Or: We find someone ignoring the licenses and hosting the extracted files somewhere.

The script "get_dvb_firmware" itself needs to be updated. I'm willing to work on this and update necessary links and test the script for some time here on Mandriva - as long as you're willing to help me with other distros and in the process.

Quoted 6 lines

Any tips how to begin please?

Kind regards,

schollsky

Hi schollsky, that would definitely be welcomed. You can submit patches against get_dvb_firmware; follow instructions here:
http://www.linuxtv.org/wiki/index.php/Development:_How_to_submit_patches

#11 lore raw
In reply to Matthias Schwarzott
Quoted 11 lines · Matthias Schwarzott

Btw. I also had a longer look at the firmeware page in wiki and removed that note about gentoo using hotplug-scripts as that is false since a long time. CityK you are right, I think most (if not all) current distributions use udev to create device nodes and upload firmware into the kernel.

Yes this ebuild is there. But it is in some respect outdated, due to lack of maintaining. This ebuild fetches the original files get_dvb_firmware also fetches and the runs get_firmware to unpack them. (All this due to license/re-distribution issues as you all know).

Okay, thanks Matthias.

Quoted 10 lines

But: These URLs tend to no longer work after some time, as manufacturers update their drivers or web-pages :(

So there should either be someone continuously updating them (in get_dvb_firmware and also here in copy).
Or: We find someone ignoring the licenses and hosting the extracted files somewhere.

Regards
Matthias

I think we are stuck with the former. But, fortunately, it looks like schollsky is willing to be the point man :)