Skip to contentSkip to conversation

tmscsim broken on amd64 with 2.6.5?

DISCUSSION Christian Roessner 2 participants 12 messages Apr 13, 2004 – Apr 15, 2004 SCSI

lore
Share & tools
lore
#0 lore raw

Hi,

Some compiler messages:

drivers/scsi/tmscsim.c: In function `dc390_pci_map':
drivers/scsi/tmscsim.c:1028: warning: unsigned int format, different type arg (arg 4)
drivers/scsi/tmscsim.c:1049: warning: unsigned int format, different type arg (arg 4)
drivers/scsi/tmscsim.c: In function `dc390_pci_unmap':
drivers/scsi/tmscsim.c:1066: warning: unsigned int format, different type arg (arg 3)
drivers/scsi/tmscsim.c:1076: warning: unsigned int format, different type arg (arg 3)

Quoted 1 line

kern.* -/var/log/tmscsim.log

I use metalong and I have not spent time looking for the configuration. I thin /var/log/everthing/current should also contain kern.*

cat /proc/scsi/scsi:

Host: scsi4 Channel: 00 Id: 04 Lun: 00
Vendor: d-linux- Model: x86-64.so.2 Rev: prea
Type: Direct-Access ANSI SCSI revision: ffffffff

lspci -vvxxx:

0000:00:00.0 Host bridge: nVidia Corporation nForce3 Host Bridge (rev a4)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at e0000000 (32-bit, prefetchable)
Capabilities: [44] #08 [0180]
Capabilities: [c0] AGP version 3.0
Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8

                Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+

Rate=x8
00: de 10 d1 00 06 01 b0 00 a4 00 00 06 00 00 00 00 10: 08 00 00 e0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 44 00 00 00 00 00 00 00 ff 00 00 00 40: 00 00 00 00 08 c0 80 01 22 00 01 01 d0 00 00 00 50: 23 04 1f 00 03 00 00 00 00 00 00 00 00 00 00 00 60: 32 31 03 00 66 45 04 00 66 06 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 30 30 00 00 13 66 66 00 80: 13 66 66 00 c8 00 00 00 70 00 00 00 1f 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 02 00 30 00 1b 42 00 1f 12 03 00 00 ff ff ff ff
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:01.0 ISA bridge: nVidia Corporation nForce3 LPC Bridge (rev a6)
Subsystem: Giga-byte Technology: Unknown device 0c11
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00: de 10 d0 00 0f 00 a0 00 a6 00 01 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 11 0c
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 58 14 11 0c 00 f0 ff fe fa 3e ff 00 fa 3e ff 00
50: fa 3e ff 00 7f b1 29 04 00 00 00 01 00 00 ff ff
60: 01 10 00 00 01 14 00 00 01 18 00 00 00 00 f9 ff
70: 10 00 ff ff 03 00 00 00 00 00 40 00 97 bb 07 00
80: 09 b7 00 00 bb 00 09 00 3f 00 00 00 00 00 00 00
90: 00 00 33 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 10 00 00 00 00 00 00 80 24 40 20 71 33 14 00
f0: 00 ff 5f bf 00 00 00 00 10 ff ff ff 00 00 30 07

0000:00:01.1 SMBus: nVidia Corporation nForce3 SMBus (rev a4)
Subsystem: Giga-byte Technology: Unknown device 0c11
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 7
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 2000 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d4 00 01 00 b0 00 a4 00 05 0c 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 1c 00 00 01 20 00 00 00 00 00 00 58 14 11 0c
30: 00 00 00 00 44 00 00 00 00 00 00 00 07 01 03 01
40: 58 14 11 0c 01 00 02 c0 00 00 00 00 00 00 00 00
50: 01 1c 00 00 01 20 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:02.0 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f5002000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d7 00 07 00 b0 00 a5 10 03 0c 00 00 80 00
10: 00 20 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 03 01
40: 58 14 04 50 01 00 02 fe 00 00 00 00 02 00 00 00
50: 00 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 09 30 07

0000:00:02.1 USB Controller: nVidia Corporation nForce3 USB 1.1 (rev a5) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f5003000 (32-bit, non-prefetchable)
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d7 00 07 00 b0 00 a5 10 03 0c 00 00 80 00
10: 00 30 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 02 03 01
40: 58 14 04 50 01 00 02 fe 00 00 00 00 03 00 00 00
50: 0c 00 00 00 1d 47 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 0c 30 07

0000:00:02.2 USB Controller: nVidia Corporation nForce3 USB 2.0 (rev a2) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology: Unknown device 5004
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f5004000 (32-bit, non-prefetchable)
Capabilities: [44] #0a [2080]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d8 00 06 00 b0 00 a2 20 03 0c 00 00 80 00
10: 00 40 00 f5 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 04 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 03 03 01
40: 58 14 04 50 0a 80 80 20 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 20 20 01 00 00 60 98 81 c3 13 00 00 00 00 00 00
70: 00 00 00 05 00 10 30 80 89 3d 84 22 77 25 04 80
80: 01 00 02 fe 00 00 00 00 00 00 00 00 15 16 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 01 00 00 00 00 00 0c e0 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 00 00 30 07

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 Audio (rev a2)
Subsystem: Giga-byte Technology: Unknown device a002
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at d800
Region 1: I/O ports at dc00 [size=128]
Region 2: Memory at f5000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 da 00 07 00 b0 00 a2 00 01 04 00 00 00 00
10: 01 d8 00 00 01 dc 00 00 00 00 00 f5 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 02 a0
30: 00 00 00 00 44 00 00 00 00 00 00 00 09 01 02 05
40: 58 14 02 a0 01 00 02 06 00 00 00 00 06 01 00 01
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 10 ff ff ff 04 06 30 07

0000:00:08.0 IDE interface: nVidia Corporation nForce3 IDE (rev a5) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology: Unknown device 5002
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: de 10 d5 00 05 00 b0 00 a5 8a 01 01 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 01 f0 00 00 00 00 00 00 00 00 00 00 58 14 02 50
30: 00 00 00 00 44 00 00 00 00 00 00 00 00 00 03 01
40: 58 14 02 50 01 00 02 00 00 00 00 00 00 09 00 00
50: 03 f0 00 00 00 00 00 00 77 20 20 20 01 00 22 20
60: 03 c4 c7 c7 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 bd 11 00 00 1a 08 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 12 ff ff ff 05 11 30 07

0000:00:0a.0 PCI bridge: nVidia Corporation nForce3 PCI Bridge (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=128
        I/O behind bridge: 00009000-0000cfff
        Memory behind bridge: f3000000-f4ffffff
        Prefetchable memory behind bridge: f0000000-f0ffffff
        Expansion ROM at 00009000 [disabled] [size=16K]
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-

00: de 10 dd 00 07 01 a0 00 a2 00 04 06 00 00 01 00 10: 00 00 00 00 00 00 00 00 00 01 01 80 90 c0 80 a2 20: 00 f3 f0 f4 00 f0 f0 f0 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00 40: 00 00 03 00 01 00 02 00 01 00 00 00 00 00 44 00 50: 00 00 fe 1f 00 00 00 00 ef 1f 00 00 03 00 80 00 60: 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 AGP Bridge (rev a4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap- 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 16
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=10
        Memory behind bridge: f1000000-f2ffffff
        Prefetchable memory behind bridge: e8000000-efffffff
        BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-

00: de 10 d2 00 07 01 20 02 a4 00 04 06 00 10 01 00 10: 00 00 00 00 00 00 00 00 00 02 02 0a f0 00 20 22 20: 00 f1 f0 f2 00 e8 f0 ef 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 0f 00 40: 01 00 00 00 00 00 f0 1f 20 00 00 00 00 00 00 00 50: 00 00 00 e0 00 f0 ff e7 ff ff ff ff ff ff ff ff 60: ff 40 ff 40 00 00 00 20 00 00 00 20 ff ff ff ff 70: ff ff ff ff 00 00 00 00 00 00 00 00 ff ff ff ff 80: ff ff ff ff 00 80 00 00 cd 01 00 00 ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: 1b 42 00 1f 00 00 00 00 0c 00 00 00 00 00 00 00
b0: 04 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 20 00 00 80 82 ff 32 07 00 05 30 07
d0: 00 00 00 00 00 00 00 00 08 00 00 e0 ff ff ff e7
e0: b0 b5 f7 ef b0 7f bf bf 70 d5 7e df f0 fe ef fb
f0: b0 de 57 ff f0 f7 ef af d0 3a ed ff 70 f5 f7 ef

0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Capabilities: [80] #08 [2101]

00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00 40: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 50: 01 01 01 00 01 01 01 00 01 01 01 00 01 01 01 00 60: 00 00 00 00 e4 00 00 00 0f cc 00 0f 0c 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 08 00 01 21 20 00 11 10 22 04 75 80 02 00 00 00 90: 56 04 51 02 00 00 ff 00 07 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 03 00 00 00 00 00 1f 00 00 00 20 00 01 00 00 00
50: 00 00 20 00 02 00 00 00 00 00 20 00 03 00 00 00
60: 00 00 20 00 04 00 00 00 00 00 20 00 05 00 00 00
70: 00 00 20 00 06 00 00 00 00 00 20 00 07 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 03 0a 00 00 00 0b 00 00 03 00 20 00 00 70 ff 00
c0: 00 00 00 00 00 00 00 00 13 10 00 00 00 f0 0f 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 03 00 00 ff 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: 01 00 00 00 01 00 00 01 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 fe e0 00 00 fe e0 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 03 00 00 00 00 00 00 00 45 34 83 13 31 0b 00 00
90: 00 8c 0c 08 07 07 7b 06 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 92 18 7c b2 9a 00 00 00 7b f5 01 21 2c 3f c6 d1
c0: 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 04 bc c1 a7 6c 20 dd f8 c9 30 49 ec 2f 98 b9 a5
e0: 2f bf f9 2f 29 68 d5 b6 5a bd 60 16 31 66 49 78
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
40: ff 3b 00 00 40 00 00 00 00 00 00 00 00 00 00 00
50: 60 20 e2 bc f1 00 00 00 00 00 00 00 00 09 00 08
60: 02 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 11 01 02 51 11 80 00 50 00 38 00 08 1b 22 00 00
80: 00 00 07 23 13 21 13 21 00 00 00 00 00 00 00 00
90: 05 00 00 00 70 00 00 00 00 c0 1f 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 3f 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 07 07 e2 04 00 00 00 00 00 00 00 00
e0: 00 00 00 00 20 0e 57 00 08 01 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 9000
Region 1: Memory at f4004000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 39 81 07 00 90 02 10 00 00 02 00 20 00 00
10: 01 90 00 00 00 40 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 ec 10 39 81
30: 00 00 00 00 50 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 01 00 c2 f7 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:07.0 SCSI storage controller: Advanced Micro Devices [AMD] 53c974 [PCscsi] (rev 10)
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+
Stepping+ SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (1000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 9400

00: 22 10 20 20 c5 01 00 02 10 00 00 01 00 20 00 00 10: 01 94 00 00 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 04 28 40: 00 00 00 40 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at f0000000 (32-bit, prefetchable)

00: 9e 10 50 03 06 00 80 02 12 00 00 04 00 20 00 00 10: 08 00 00 f0 00 00 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 09 01 10 28 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0a.0 Network controller: AVM Audiovisuelles MKTG & Computer System GmbH B1 ISDN
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-

        Latency: 32
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 9800
        Region 1: I/O ports at 9c00 [size=32]

00: 44 12 00 07 07 00 00 00 00 00 80 02 00 20 00 00 10: 01 98 00 00 01 9c 00 00 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 30: 00 00 00 00 00 00 00 00 00 00 00 00 0b 01 00 00 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

0000:01:0b.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8169 (rev 10)
Subsystem: Giga-byte Technology: Unknown device e000
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (8000ns min, 16000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at a000
Region 1: Memory at f4007000 (32-bit, non-prefetchable) [size=256]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: ec 10 69 81 07 00 b0 02 10 00 00 02 08 20 00 00
10: 01 a0 00 00 00 70 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 e0
30: 00 00 00 00 dc 00 00 00 00 00 00 00 0b 01 20 40
40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 01 00 c2 f7
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0c.0 RAID bus controller: Integrated Technology Express, Inc.:
Unknown device 8212 (rev 11)
Subsystem: Integrated Technology Express, Inc.: Unknown device 0001
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (2000ns min, 2000ns max)
Interrupt: pin A routed to IRQ 7
Region 0: I/O ports at a410
Region 1: I/O ports at a800 [size=4]
Region 2: I/O ports at ac10 [size=8]
Region 3: I/O ports at b000 [size=4]
Region 4: I/O ports at b400 [size=16]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 83 12 12 82 07 00 30 02 11 00 04 01 00 00 00 00
10: 11 a4 00 00 01 a8 00 00 11 ac 00 00 01 b0 00 00
20: 01 b4 00 00 00 00 00 00 00 00 00 00 83 12 01 00
30: 00 00 00 00 80 00 00 00 00 00 00 00 07 01 08 08
40: 00 a0 36 00 08 00 08 00 02 02 00 00 04 02 04 02
50: 01 20 00 00 a3 00 31 31 a3 00 31 31 00 1a 02 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 01 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0d.0 RAID bus controller: CMD Technology Inc: Unknown device 3512
(rev 01)
Subsystem: CMD Technology Inc: Unknown device 6512
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at b800
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at f4005000 (32-bit, non-prefetchable) [size=512]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
00: 95 10 12 35 07 00 b0 02 01 00 04 01 08 20 00 00
10: 01 b8 00 00 01 bc 00 00 01 c0 00 00 01 c4 00 00
20: 01 c8 00 00 00 50 00 f4 00 00 00 00 95 10 12 65
30: 00 00 00 00 60 00 00 00 00 00 00 00 09 01 00 00
40: 02 00 00 00 02 a0 22 80 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 01 00 22 06 00 40 00 64 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 22 00 00 00 22 00 00 00 00 00 00 00 ff ff ef a4
90: 00 00 00 08 ff ff 00 00 00 00 00 18 00 00 00 00
a0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40
b0: 01 21 15 65 dd 62 dd 62 92 43 92 43 09 40 09 40
c0: 84 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

0000:01:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB23
IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology: Unknown device 1000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 32 (500ns min, 1000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f4006000 (32-bit, non-prefetchable) Region 1: Memory at f4000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00: 4c 10 24 80 06 00 10 02 00 10 00 0c 08 20 00 00
10: 00 60 00 f4 00 00 00 f4 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 58 14 00 10
30: 00 00 00 00 44 00 00 00 00 00 00 00 0b 01 02 04
40: 00 00 00 00 01 00 02 7e 00 00 00 00 00 00 00 00
50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 88 00 00 00
f0: 10 00 00 00 82 10 00 00 58 14 00 10 00 00 00 00

0000:02:00.0 VGA compatible controller: nVidia Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev a2) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 8063
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 7
Region 0: Memory at f1000000 (32-bit, non-prefetchable) Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 3.0
Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3+ Rate=x4,x8

                Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW+

Rate=x8
00: de 10 81 01 07 00 b0 02 a2 00 00 03 00 f8 00 00 10: 00 00 00 f1 08 00 00 e8 00 00 00 00 00 00 00 00 20: 00 00 00 00 00 00 00 00 00 00 00 00 43 10 63 80 30: 00 00 00 00 60 00 00 00 00 00 00 00 07 01 05 01 40: 43 10 63 80 02 00 30 00 1b 0e 00 1f 12 43 00 1f 50: 01 00 00 00 01 00 00 00 ce d6 23 00 0f 00 00 00 60: 01 44 02 00 00 00 00 00 00 00 00 00 00 00 00 00 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Regards

Christian

-------------------------------------------------------

Signature · 5 lines
Roessner Network Solutions (R.N.S.)

Tel.: 0641-2097252, Fax: 0641-2097253, Mobil: 0171-3611230
URL: http://www.roessner-net.com/
PGP: http://www.roessner-nat.com/kontakt/0x6A549505.asc
Apr 13 10:16:32 [kernel] DC390_init: No EEPROM found! Trying default settings ...
Apr 13 10:16:32 [kernel] DC390: Used defaults: AdaptID=7, SpeedIdx=1 (8.0 MHz), DevMode=0x1f, AdaptMode=0x0f, TaggedCmnds=3 (16), DelayReset=1s
Apr 13 10:16:32 [kernel] DC390: 1 adapters found
Apr 13 10:16:32 [kernel] scsi4 : Tekram DC390/AM53C974 V2.0f 2000-12-20
Apr 13 10:16:33 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:33 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:33 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:34 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:34 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:34 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:34 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_map(): Mapped sense buffer 000001001e6ab6d8 at 1e6ab6d8
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:34 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523dc0 at 523dc0
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:34 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523dc0
Apr 13 10:16:34 [kernel] DC390: RESET ... done
Apr 13 10:16:37 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_map(): Mapped sense buffer 000001001e6ab6d8 at 1e6ab6d8
Apr 13 10:16:37 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:37 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_map(): Mapped sense buffer 000001001e6ab6d8 at 1e6ab6d8
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:37 [kernel] sda: Unit Not Ready, sense:
Apr 13 10:16:37 [kernel] : sense =  0  0
Apr 13 10:16:37 [kernel] Non-extended sense class 0 code 0x0
Apr 13 10:16:37 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522e00 at 522e00
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:37 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:38 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522e00 at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:38 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522e00 at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped sense buffer at 1e6ab6d8
Apr 13 10:16:38 [kernel] sda : READ CAPACITY failed.
Apr 13 10:16:38 [kernel] sd: sense =  0  0
Apr 13 10:16:38 [kernel] Non-extended sense class 0 code 0x0
Apr 13 10:16:38 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522e00 at 522e00
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 10:16:38 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 522e00
Apr 13 10:16:38 [kernel] sda: asking for cache data failed
Apr 13 10:16:38 [kernel] sda: assuming drive cache: write through
Apr 13 10:16:38 [kernel] Attached scsi disk sda at scsi4, channel 0, id 4, lun 0
Apr 13 10:16:38 [kernel] Attached scsi generic sg1 at scsi4, channel 0, id 4, lun 0,  type 0
Apr 13 10:16:38 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:39 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:39 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523ec0 at 523ec0
Apr 13 10:16:39 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,dc390_pci_unmap(): Unmapped request buffer at 523ec0
Apr 13 10:16:39 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated twice -
Apr 13 10:16:39 [scsi.agent] disk at /devices/pci0000:00/0000:00:0a.0/0000:01:07.0/host4/4:0:4:0
Apr 13 10:16:40 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 154 times -
Apr 13 10:17:00 [CRON] (root) CMD (test -x /usr/sbin/run-crons && /usr/sbin/run-crons )_
Apr 13 10:17:00 [kernel] DC390: Irq (11) caught: .. IRQ returned
#1 lore raw

Hi

Quoted 6 lines

drivers/scsi/tmscsim.c: In function `dc390_pci_map':
drivers/scsi/tmscsim.c:1028: warning: unsigned int format, different type arg
(arg 4)
drivers/scsi/tmscsim.c:1049: warning: unsigned int format, different type arg

Quoted 8 lines

(arg 4)
drivers/scsi/tmscsim.c: In function `dc390_pci_unmap':
drivers/scsi/tmscsim.c:1066: warning: unsigned int format, different type arg
(arg 3)
drivers/scsi/tmscsim.c:1076: warning: unsigned int format, different type arg
(arg 3)

Ok, just some printk's formats. Will fix that, thanks.

Quoted 4 lines
Quoted 1 line

kern.* -/var/log/tmscsim.log

I use metalong and I have not spent time looking for the configuration. I thin /var/log/everthing/current should also contain kern.*

Doesn't look like that. I think, at least, KERN_DEBUG messages are missing. So, now you have both patches applied, right? Could you then uncomment additionally DC390_DEBUG0 and DC390_DCBDEBUG, and also specify scsi_logging_level=0x1ff, when loading the scsi_mod module (which also means you need scsi-logging enabled in scsi configuration), or scsi_logging=0x1ff as a kernel boot-parameter. Of course, this is only feasible, if you can refrain from using SCSI for anything else during these tests.

Thanks
Guennadi

#2 lore raw

Hi,

Am Dienstag, 13. April 2004 13:05 schrieben Sie:

Quoted 17 lines

Hi

Quoted 6 lines

drivers/scsi/tmscsim.c: In function `dc390_pci_map':
drivers/scsi/tmscsim.c:1028: warning: unsigned int format, different type arg
(arg 4)
drivers/scsi/tmscsim.c:1049: warning: unsigned int format, different type arg

Quoted 8 lines

(arg 4)
drivers/scsi/tmscsim.c: In function `dc390_pci_unmap':
drivers/scsi/tmscsim.c:1066: warning: unsigned int format, different type arg
(arg 3)
drivers/scsi/tmscsim.c:1076: warning: unsigned int format, different type arg
(arg 3)

Quoted 8 lines

Ok, just some printk's formats. Will fix that, thanks.

Quoted 4 lines
Quoted 1 line

kern.* -/var/log/tmscsim.log

I use metalong and I have not spent time looking for the configuration. I thin /var/log/everthing/current should also contain kern.*

Doesn't look like that. I think, at least, KERN_DEBUG messages are missing.

Well, my mistake. KERN.* is written to /var/log/kernel/current.

Quoted 1 line

So, now you have both patches applied, right?

Yes

Quoted 7 lines

Could you then uncomment
additionally DC390_DEBUG0 and DC390_DCBDEBUG, and also specify scsi_logging_level=0x1ff, when loading the scsi_mod module (which also means you need scsi-logging enabled in scsi configuration), or scsi_logging=0x1ff as a kernel boot-parameter. Of course, this is only feasible, if you can refrain from using SCSI for anything else during these tests.

I have enabled all these things. When trying to compile, the process stops:

drivers/scsi/tmscsim.c: In function `dc390_pci_map':
drivers/scsi/tmscsim.c:1028: warning: unsigned int format, different type arg (arg 4)
drivers/scsi/tmscsim.c:1049: warning: unsigned int format, different type arg (arg 4)
drivers/scsi/tmscsim.c: In function `dc390_pci_unmap':
drivers/scsi/tmscsim.c:1066: warning: unsigned int format, different type arg (arg 3)
drivers/scsi/tmscsim.c:1076: warning: unsigned int format, different type arg (arg 3)
In file included from drivers/scsi/tmscsim.c:1752:
drivers/scsi/scsiiom.c: In function `dc390_remove_dev':
drivers/scsi/scsiiom.c:1285: warning: cast from pointer to integer of different size
drivers/scsi/tmscsim.c: In function `dc390_initDCB':
drivers/scsi/tmscsim.c:1770: error: syntax error before "id" drivers/scsi/tmscsim.c: In function `DC390_init':
drivers/scsi/tmscsim.c:2145: warning: cast from pointer to integer of different size
drivers/scsi/tmscsim.c:2153: warning: cast from pointer to integer of different size
drivers/scsi/tmscsim.c:2153: warning: cast from pointer to integer of different size
drivers/scsi/tmscsim.c:2153: warning: cast from pointer to integer of different size
drivers/scsi/tmscsim.c:2155: warning: unsigned int format, different type arg (arg 2)
drivers/scsi/tmscsim.c:2155: warning: unsigned int format, different type arg (arg 3)
drivers/scsi/tmscsim.c:2155: warning: unsigned int format, different type arg (arg 4)
make[2]: *** [drivers/scsi/tmscsim.o] Error 1
make[1]: *** [drivers/scsi] Error 2
make: *** [drivers] Error 2

When I applied the second patch, I first did not do make clean. But now I did

make clean && make && make modules_install

and I got the errors above.

So I think, some casts are missing?

Regards

Christian

#3 lore raw
Quoted 2 lines

drivers/scsi/tmscsim.c: In function `dc390_initDCB':
drivers/scsi/tmscsim.c:1770: error: syntax error before "id"

oh, sorry, forgot - there's a missing comma there. Should be:

DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n", \

Please, fix, and try again.

Thanks
Guennadi

#4 lore raw

Hi,

Quoted 7 lines
Quoted 2 lines

drivers/scsi/tmscsim.c: In function `dc390_initDCB':
drivers/scsi/tmscsim.c:1770: error: syntax error before "id"

oh, sorry, forgot - there's a missing comma there. Should be:

DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i):
%p\n", \

Done.

/var/log/kernel/current_debug attached.

Gruß
Christian

Apr 13 15:54:20 [kernel] bootsplash: status on console 0 changed to on
Apr 13 15:55:46 [kernel] Bootdata ok (command line is hdc=ide-scsi vga=0x317 video=mtrr,vesa=1024x768 root=/dev/hdb3 acpi=force lapic splash=silent scsi_logging=0x1ff)
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 11
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 9
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 11
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 9
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
Apr 13 15:55:46 [kernel] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 7
Apr 13 15:55:46 [kernel] PCI: Using ACPI for IRQ routing
Apr 13 15:55:46 [kernel] PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Apr 13 15:55:46 [kernel] agpgart: Detected AGP bridge 0
Apr 13 15:55:46 [kernel] agpgart: Setting up Nforce3 AGP.
Apr 13 15:55:46 [kernel] agpgart: Maximum main memory to use for agp memory: 439M
Apr 13 15:55:46 [kernel] agpgart: AGP aperture is 128M @ 0xe0000000
Apr 13 15:55:46 [kernel] PCI-DMA: Disabling IOMMU.
Apr 13 15:55:46 [kernel] vesafb: framebuffer at 0xe8000000, mapped to 0xffffff000004e000, size 16384k
Apr 13 15:55:46 [kernel] vesafb: mode is 1024x768x16, linelength=2048, pages=1
Apr 13 15:55:46 [kernel] vesafb: scrolling: redraw
Apr 13 15:55:46 [kernel] vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Apr 13 15:55:46 [kernel] fb0: VESA VGA frame buffer device
Apr 13 15:55:46 [kernel] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
Apr 13 15:55:46 [kernel] ikconfig 0.7 with /proc/config*
Apr 13 15:55:46 [kernel] devfs: 2004-01-31 Richard Gooch ([email protected])
Apr 13 15:55:46 [kernel] devfs: boot_options: 0x1
Apr 13 15:55:46 [kernel] Installing knfsd (copyright (C) 1996 [email protected]).
Apr 13 15:55:46 [kernel] Initializing Cryptographic API
Apr 13 15:55:46 [kernel] ACPI: Power Button (FF) [PWRF]
Apr 13 15:55:46 [kernel] ACPI: Processor [CPU0] (supports C1)
Apr 13 15:55:46 [kernel] mice: PS/2 mouse device common for all mice
Apr 13 15:55:46 [kernel] input: PC Speaker
Apr 13 15:55:46 [kernel] serio: i8042 AUX port at 0x60,0x64 irq 12
Apr 13 15:55:46 [kernel] input: PS/2 Generic Mouse on isa0060/serio1
Apr 13 15:55:46 [kernel] serio: i8042 KBD port at 0x60,0x64 irq 1
Apr 13 15:55:46 [kernel] input: AT Translated Set 2 keyboard on isa0060/serio0
Apr 13 15:55:46 [kernel] bootsplash 3.1.4-2004/02/19: looking for picture.... silentjpeg size 21830 bytes, found (1024x768, 16923 bytes, v3).
Apr 13 15:55:46 [kernel] Console: switching to colour frame buffer device 122x40
Apr 13 15:55:46 [kernel] Real Time Clock Driver v1.12
Apr 13 15:55:46 [kernel] Linux agpgart interface v0.100 (c) Dave Jones
Apr 13 15:55:46 [kernel] Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
Apr 13 15:55:46 [kernel] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Apr 13 15:55:46 [kernel] Using anticipatory io scheduler
Apr 13 15:55:46 [kernel] Floppy drive(s): fd0 is 1.44M
Apr 13 15:55:46 [kernel] FDC 0 is a post-1991 82077
Apr 13 15:55:46 [kernel] RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Apr 13 15:55:46 [kernel] loop: loaded (max 8 devices)
Apr 13 15:55:46 [kernel] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Apr 13 15:55:46 [kernel] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Apr 13 15:55:46 [kernel] NFORCE3: IDE controller at PCI slot 0000:00:08.0
Apr 13 15:55:46 [kernel] NFORCE3: chipset revision 165
Apr 13 15:55:46 [kernel] NFORCE3: not 100% native mode: will probe irqs later
Apr 13 15:55:46 [kernel] NFORCE3: BIOS didn't set cable bits correctly. Enabling workaround.
Apr 13 15:55:46 [kernel] tuner: chip found at addr 0xc0 i2c-bus bt848 #0 [sw]
Apr 13 15:55:46 [kernel] tuner: type set to 0 (Temic PAL (4002 FH5)) by bt848 #0 [sw]
Apr 13 15:55:46 [kernel] bttv0: registered device video0
Apr 13 15:55:46 [kernel] bttv0: registered device vbi0
Apr 13 15:55:46 [kernel] kjournald starting.  Commit interval 5 seconds
Apr 13 15:55:46 [kernel] EXT3 FS on hdb1, internal journal
Apr 13 15:55:46 [kernel] EXT3-fs: mounted filesystem with ordered data mode.
Apr 13 15:55:46 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Apr 13 15:55:46 [kernel] ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
Apr 13 15:55:46 [kernel] ohci_hcd: block sizes: ed 80 td 96
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.0: nVidia Corporation nForce3 USB 1.1
Apr 13 15:55:46 [kernel] PCI: Setting latency timer of device 0000:00:02.0 to 64
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.0: irq 11, pci mem ffffff00010ee000
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
Apr 13 15:55:46 [kernel] hub 1-0:1.0: USB hub found
Apr 13 15:55:46 [kernel] hub 1-0:1.0: 3 ports detected
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.1: nVidia Corporation nForce3 USB 1.1 (#2)
Apr 13 15:55:46 [kernel] ******* Your BIOS seems to not contain a fix for K8 errata #93
Apr 13 15:55:46 [kernel] ******* Working around it, but it may cause SEGVs or burn power.
Apr 13 15:55:46 [kernel] ******* Please consider a BIOS update.
Apr 13 15:55:46 [kernel] ******* Disabling USB legacy in the BIOS may also help.
Apr 13 15:55:46 [kernel] PCI: Setting latency timer of device 0000:00:02.1 to 64
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.1: irq 11, pci mem ffffff00010f0000
Apr 13 15:55:46 [kernel] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
Apr 13 15:55:46 [kernel] hub 2-0:1.0: USB hub found
Apr 13 15:55:46 [kernel] ehci_hcd 0000:00:02.2: nVidia Corporation nForce3 USB 2.0
Apr 13 15:55:46 [kernel] PCI: Setting latency timer of device 0000:00:02.2 to 64
Apr 13 15:55:46 [kernel] ehci_hcd 0000:00:02.2: irq 11, pci mem ffffff00010f2000
Apr 13 15:55:46 [kernel] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
Apr 13 15:55:46 [kernel] PCI: cache line size of 64 is not supported by device 0000:00:02.2
Apr 13 15:55:46 [kernel] ehci_hcd 0000:00:02.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29
Apr 13 15:55:46 [kernel] hub 3-0:1.0: USB hub found
Apr 13 15:55:46 [kernel] hub 3-0:1.0: 6 ports detected
Apr 13 15:55:46 [kernel] DC390(0): IO_PORT=9400,IRQ=b
Apr 13 15:55:46 [kernel] DC390_init: No EEPROM found! Trying default settings ...
Apr 13 15:55:46 [kernel] DC390: Used defaults: AdaptID=7, SpeedIdx=1 (8.0 MHz), DevMode=0x1f, AdaptMode=0x0f, TaggedCmnds=3 (16), DelayReset=1s
Apr 13 15:55:46 [kernel] DC390: pSH = 1db7c000, Index 00
Apr 13 15:55:46 [kernel] DC390: Adapter index 0, ID 7, IO 0x00009400, IRQ 0x0b
Apr 13 15:55:46 [kernel] DC390: pACB = 1db7c308, pDCBmap = 1db7c374, pSRB_array = 1db7c468
Apr 13 15:55:46 [kernel] DC390: ACB size= 1bf0, DCB size=   50, SRB size=   88
Apr 13 15:55:46 [kernel] DC390: 1 adapters found
Apr 13 15:55:46 [kernel] scsi1 : Tekram DC390/AM53C974 V2.0f 2000-12-20
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=0,LUN=0 (pid=11), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 0, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] DC390: We were just reset and don't accept commands yet!
Apr 13 15:55:46 [kernel] DC390: Insert pSRB 000001001db7c468 cmd 11 to Waiting
Apr 13 15:55:46 [kernel]  ... command (pid 11) queued successfully.
Apr 13 15:55:46 [kernel] usb 2-1: new low speed USB device using address 2
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 29 times -
Apr 13 15:55:46 [kernel] input: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.1-1
Apr 13 15:55:46 [kernel] drivers/usb/core/usb.c: registered new driver hid
Apr 13 15:55:46 [kernel] drivers/usb/input/hid-core.c: v2.0:USB HID core driver
Apr 13 15:55:46 [kernel] usb 2-2: new full speed USB device using address 3
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 11 times -
Apr 13 15:55:46 [kernel] drivers/usb/core/usb.c: registered new driver usblp
Apr 13 15:55:46 [kernel] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 2 times -
Apr 13 15:55:46 [kernel] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x3004
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Debug: Waiting queue woken up by timer!
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from head of Waiting
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 11
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 0, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 11
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=1,LUN=0 (pid=12), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 1, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 12 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 12) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 12
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 1, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 12
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=2,LUN=0 (pid=13), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 2, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 13 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 13) queued successfully.
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 13
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 2, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 13
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=3,LUN=0 (pid=14), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 3, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 14 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 14) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 14
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 3, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 14
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=4,LUN=0 (pid=15), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 4, LUN 0): 000001001e5fa940
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 15 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 15) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 00523e80)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 15
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00000000
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 15
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel]   Vendor:           Model:                   Rev:     
Apr 13 15:55:46 [kernel]   Type:   Direct-Access                      ANSI SCSI revision: 00
Apr 13 15:55:46 [kernel] Attached scsi generic sg1 at scsi1, channel 0, id 4, lun 0,  type 0
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=5,LUN=0 (pid=16), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 5, LUN 0): 000001001f9e32c0
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 12 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 16 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 16) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 16
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 5, LUN 0): 000001001f9e32c0
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 16
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=12,Tgt=6,LUN=0 (pid=17), buffer=0000010000523e80
Apr 13 15:55:46 [kernel] DC390: alloc mem for DCB (ID 6, LUN 0): 000001001f9e32c0
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 17 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 17) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (ff,00000000), SRB 000001001db7c468, pid 17
Apr 13 15:55:46 [kernel] DC390: INQUIRY: result: 00010000
Apr 13 15:55:46 [kernel] DC390: Driver about to free DCB (ID 6, LUN 0): 000001001f9e32c0
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 17
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] CAPI Subsystem Rev 1.1.2.7
Apr 13 15:55:46 [kernel] b1: revision 1.1.2.2
Apr 13 15:55:46 [kernel] b1dma: revision 1.1.2.3
Apr 13 15:55:46 [kernel] b1pci: PCI BIOS reports AVM-B1 at i/o 0x9c00, irq 11
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=18), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 18 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 18) queued successfully.
Apr 13 15:55:46 [kernel] kcapi: Controller 1: b1pci-9c00 attached
Apr 13 15:55:46 [kernel] b1pci: AVM B1 PCI at i/o 0x9c00, irq 11, revision 2
Apr 13 15:55:46 [kernel] b1pci: revision 1.1.2.2
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 000001001db7c468, pid 18
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 18 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] libata version 1.02 loaded.
Apr 13 15:55:46 [kernel] sata_sil version 0.54
Apr 13 15:55:46 [kernel] ata2: SATA max UDMA/100 cmd 0xFFFFFF00010F60C0 ctl 0xFFFFFF00010F60CA bmdma 0xFFFFFF00010F6008 irq 9
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 18
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 18
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=03,Tgt=4,LUN=0 (pid=18), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000523e80 at 523e80
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 03 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 18 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 18) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 00523e80)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e80
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 18
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 18
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: RESET ... done
Apr 13 15:55:46 [kernel] scsi: Device offlined - not ready after error recovery: host 1 channel 0 id 4 lun 0
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=19), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] DC390: We were just reset and don't accept commands yet!
Apr 13 15:55:46 [kernel] DC390: Insert pSRB 000001001db7c468 cmd 19 to Waiting
Apr 13 15:55:46 [kernel]  ... command (pid 19) queued successfully.
Apr 13 15:55:46 [kernel] ata1: no device found (phy stat 00000000)
Apr 13 15:55:46 [kernel] ata1: thread exiting
Apr 13 15:55:46 [kernel] scsi2 : sata_sil
Apr 13 15:55:46 [kernel] ata2: no device found (phy stat 00000000)
Apr 13 15:55:46 [kernel] ata2: thread exiting
Apr 13 15:55:46 [kernel] scsi3 : sata_sil
Apr 13 15:55:46 [kernel] USB Universal Host Controller Interface driver v2.2
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 16 times -
Apr 13 15:55:46 [kernel] Disabled Privacy Extensions on device ffffffff8043fe00(lo)
Apr 13 15:55:46 [kernel] DC390: Debug: Waiting queue woken up by timer!
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 19 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from head of Waiting
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 000001001db7c468, pid 19
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 19 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 19
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 19
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=84), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 84 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 84) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 000001001db7c468, pid 84
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 00 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 84 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 84
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 84
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] sda: Unit Not Ready, sense:
Apr 13 15:55:46 [kernel] : sense =  0  0
Apr 13 15:55:46 [kernel] Non-extended sense class 0 code 0x0
Apr 13 15:55:46 [kernel] Raw sense data:0x00 0x00 0x00 0x00 
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=25,Tgt=4,LUN=0 (pid=85), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522000 at 522000
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 85 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 85) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522000
Apr 13 15:55:46 [kernel]  SRBdone (02,00000000), SRB 000001001db7c468, pid 85
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 85 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 85
Apr 13 15:55:46 [kernel] DC390: RETRY pid 85 (25), target 04-00
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522000 at 522000
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 85 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522000
Apr 13 15:55:46 [kernel]  SRBdone (02,08000000), SRB 000001001db7c468, pid 85
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 85 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,08000000), SRB 000001001db7c468, pid 85
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 85
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=25,Tgt=4,LUN=0 (pid=86), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522000 at 522000
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 86 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 86) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522000
Apr 13 15:55:46 [kernel]  SRBdone (02,00000000), SRB 000001001db7c468, pid 86
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 86 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 86
Apr 13 15:55:46 [kernel] DC390: RETRY pid 86 (25), target 04-00
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522000 at 522000
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 86 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522000
Apr 13 15:55:46 [kernel]  SRBdone (02,08000000), SRB 000001001db7c468, pid 86
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f198 at 1e64f198
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 25 (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select wo/DisCn for Cmd 86 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: AutoReqSense !
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 1e64f198)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777198, Total: -16777198, Remaining: 16777198
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f198
Apr 13 15:55:46 [kernel]  SRBdone (00,08000000), SRB 000001001db7c468, pid 87
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 87
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] sda : READ CAPACITY failed.
Apr 13 15:55:46 [kernel] sda : status=1, message=00, host=0, driver=08 
Apr 13 15:55:46 [kernel] sd: sense =  0  0
Apr 13 15:55:46 [kernel] Non-extended sense class 0 code 0x0
Apr 13 15:55:46 [kernel] Raw sense data:0x00 0x00 0x00 0x00 
Apr 13 15:55:46 [kernel] DC390: Queue Cmd=1a,Tgt=4,LUN=0 (pid=88), buffer=0000010000522000
Apr 13 15:55:46 [kernel] DC390: Get Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: Free SRB w/o Waiting
Apr 13 15:55:46 [kernel] dc390_pci_map(): Mapped request buffer 0000010000522000 at 522000
Apr 13 15:55:46 [kernel] DC390: Start SCSI command: 1a (Sync:01)
Apr 13 15:55:46 [kernel] DC390: Select w/DisCn for Cmd 88 (SRB 000001001db7c468), No TagQ
Apr 13 15:55:46 [kernel] DC390: Append SRB 000001001db7c468 to Going
Apr 13 15:55:46 [kernel]  ... command (pid 88) queued successfully.
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 15:55:46 [kernel] DC390: [1]dc390_DataInPhase(1) (81)
Apr 13 15:55:46 [kernel]  DC390: Next SG segment.<7> DC390: Start transfer: 0 bytes (address 00522000)
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 15:55:46 [kernel] DC390: DMA Blast aborted unfinished!
Apr 13 15:55:46 [kernel] Blast: Read 40960 times DMA_Status 00<7>Xfered: -16777212, Total: -16777212, Remaining: 16777212
Apr 13 15:55:46 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=87,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=08,<6>DC390: [3]dc390_Status_0(0) (87)
Apr 13 15:55:46 [kernel] DC390: [4]dc390_Nop_0(1) (04)
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522000
Apr 13 15:55:46 [kernel]  SRBdone (00,00000000), SRB 000001001db7c468, pid 88
Apr 13 15:55:46 [kernel] DC390: Remove SRB 000001001db7c468 from Going
Apr 13 15:55:46 [kernel] DC390: Free SRB 000001001db7c468
Apr 13 15:55:46 [kernel] DC390: SRBdone: done pid 88
Apr 13 15:55:46 [kernel] .. IRQ returned
Apr 13 15:55:46 [kernel] sda: asking for cache data failed
Apr 13 15:55:46 [kernel] sda: assuming drive cache: write through
Apr 13 15:55:46 [kernel] Attached scsi disk sda at scsi1, channel 0, id 4, lun 0
Apr 13 15:55:46 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated twice -
Apr 13 15:55:47 [kernel] parport0: PC-style at 0x278 (0x678) [PCSPP,TRISTATE]
Apr 13 15:55:47 [kernel] lp0: using parport0 (polling).
Apr 13 15:55:47 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 3 times -
Apr 13 15:55:49 [kernel] ip_tables: (C) 2000-2002 Netfilter core team
Apr 13 15:55:49 [kernel] ip_conntrack version 2.1 (2047 buckets, 16376 max) - 432 bytes per conntrack
Apr 13 15:55:52 [kernel] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Apr 13 15:55:52 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 23 times -
Apr 13 15:55:56 [kernel] bootsplash: status on console 0 changed to on
Apr 13 15:55:57 [kernel] DC390: Irq (11) caught: .. IRQ returned
Apr 13 15:55:57 [kernel] eth1: no IPv6 routers present
Apr 13 15:56:00 [kernel] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Apr 13 15:56:01 [kernel] DC390: Irq (11) caught: .. IRQ returned
Apr 13 15:56:02 [kernel] eth0: no IPv6 routers present
Apr 13 15:56:15 [kernel] DC390: Irq (11) caught: .. IRQ returned
                - Last output repeated 240 times -
Apr 13 16:03:09 [kernel] DC390: shutdown
Apr 13 16:03:16 [kernel] DC390(0): IO_PORT=9400,IRQ=b
Apr 13 16:03:16 [kernel] DC390_init: No EEPROM found! Trying default settings ...
Apr 13 16:03:16 [kernel] DC390: Used defaults: AdaptID=7, SpeedIdx=1 (8.0 MHz), DevMode=0x1f, AdaptMode=0x0f, TaggedCmnds=3 (16), DelayReset=1s
Apr 13 16:03:16 [kernel] DC390: pSH = 16470000, Index 00
Apr 13 16:03:16 [kernel] DC390: Adapter index 0, ID 7, IO 0x00009400, IRQ 0x0b
Apr 13 16:03:16 [kernel] DC390: pACB = 16470308, pDCBmap = 16470374, pSRB_array = 16470468
Apr 13 16:03:16 [kernel] DC390: ACB size= 1bf0, DCB size=   50, SRB size=   88
Apr 13 16:03:16 [kernel] DC390: 1 adapters found
Apr 13 16:03:16 [kernel] scsi4 : Tekram DC390/AM53C974 V2.0f 2000-12-20
Apr 13 16:03:16 [kernel] DC390: Queue Cmd=12,Tgt=0,LUN=0 (pid=89), buffer=0000010000522ec0
Apr 13 16:03:18 [kernel] DC390: Debug: Waiting queue woken up by timer!
Apr 13 16:03:18 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:18 [kernel] DC390: Queue Cmd=12,Tgt=1,LUN=0 (pid=90), buffer=0000010000522ec0
Apr 13 16:03:18 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:18 [kernel] DC390: Queue Cmd=12,Tgt=2,LUN=0 (pid=91), buffer=0000010000522ec0
Apr 13 16:03:18 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:18 [kernel] DC390: Queue Cmd=12,Tgt=3,LUN=0 (pid=92), buffer=0000010000522ec0
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:19 [kernel] DC390: Queue Cmd=12,Tgt=4,LUN=0 (pid=93), buffer=0000010000522ec0
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:19 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=94), buffer=0000010000523e00
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 0000010016470468, pid 94
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:19 [kernel] DC390: Queue Cmd=03,Tgt=4,LUN=0 (pid=94), buffer=0000010000523e00
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:19 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522dc0
Apr 13 16:03:19 [kernel] DC390: RESET ... done
Apr 13 16:03:19 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=95), buffer=0000010000523e00
Apr 13 16:03:22 [kernel] DC390: Debug: Waiting queue woken up by timer!
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: [3]dc390_StatusPhase(1) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 0000010016470468, pid 95
Apr 13 16:03:22 [kernel] dc390_pci_map(): Mapped sense buffer 000001001e64f898 at 1e64f898
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:22 [kernel] DC390: Queue Cmd=00,Tgt=4,LUN=0 (pid=96), buffer=0000010000523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC, SRBdone (02,00000000), SRB 0000010016470468, pid 96
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:22 [kernel] sda: Unit Not Ready, sense:
Apr 13 16:03:22 [kernel] : sense =  0  0
Apr 13 16:03:22 [kernel] Non-extended sense class 0 code 0x0
Apr 13 16:03:22 [kernel] DC390: Queue Cmd=25,Tgt=4,LUN=0 (pid=97), buffer=0000010000523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:22 [kernel] DC390: Queue Cmd=25,Tgt=4,LUN=0 (pid=98), buffer=0000010000523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:22 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:23 [kernel] DC390: Queue Cmd=25,Tgt=4,LUN=0 (pid=99), buffer=0000010000523e00
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped sense buffer at 1e64f898
Apr 13 16:03:23 [kernel] sda : READ CAPACITY failed.
Apr 13 16:03:23 [kernel] sd: sense =  0  0
Apr 13 16:03:23 [kernel] Non-extended sense class 0 code 0x0
Apr 13 16:03:23 [kernel] DC390: Queue Cmd=1a,Tgt=4,LUN=0 (pid=100), buffer=0000010000523e00
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=81,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=18,<6>DC390: [5]dc390_Nop_0(0) (81)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=83,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=10,<6>DC390: [1]dc390_DataIn_0(0) (83)
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 523e00
Apr 13 16:03:23 [kernel] sda: asking for cache data failed
Apr 13 16:03:23 [kernel] sda: assuming drive cache: write through
Apr 13 16:03:23 [kernel] Attached scsi disk sda at scsi4, channel 0, id 4, lun 0
Apr 13 16:03:23 [kernel] Attached scsi generic sg1 at scsi4, channel 0, id 4, lun 0,  type 0
Apr 13 16:03:23 [kernel] DC390: Queue Cmd=12,Tgt=5,LUN=0 (pid=101), buffer=0000010000522ec0
Apr 13 16:03:23 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:23 [kernel] DC390: Queue Cmd=12,Tgt=6,LUN=0 (pid=102), buffer=0000010000522ec0
Apr 13 16:03:24 [kernel] DC390: Irq (11) caught: <7>sstatus=80,<6>Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=20,<6>DISC,dc390_pci_unmap(): Unmapped request buffer at 522ec0
Apr 13 16:03:24 [kernel] DC390: Irq (11) caught: .. IRQ returned
#5 lore raw
Quoted 1 line · Christian Roessner

/var/log/kernel/current_debug attached.

Great! Please, try the next one (on the top of the current).

Guennadi
---
Guennadi Liakhovetski

drivers/scsi/tmscsim.c renamed from drivers/scsi/tmscsim.c~ +2 -2
@@ -1024,7 +1024,7 @@
 			pci_map_page(pdev, virt_to_page(pcmd->sense_buffer),
 				     (unsigned long)pcmd->sense_buffer & ~PAGE_MASK, sizeof(pcmd->sense_buffer),
 				     DMA_FROM_DEVICE);
-		pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
@@ -1045,7 +1045,7 @@
 				     (unsigned long)pcmd->request_buffer & ~PAGE_MASK,
 				     pcmd->request_bufflen, scsi_to_pci_dma_dir(pcmd->sc_data_direction));
 		/* TODO: error handling */
-		pSRB->Segmentx.length = pcmd->request_bufflen;
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped request buffer %p at %x\n", __FUNCTION__, pcmd->request_buffer, cmdp->saved_dma_handle));
#6 lore raw

Hi,

great! Problem fixed. cdrecord -scanbus show my TEAC 512 writer. /proc/scsi/tmscsim/5 shows sync-speed 5.0M. Fine!

Can I remove the debugging statements?

Regards

Christian

#7 lore raw
Quoted 4 lines · Christian Roessner

great! Problem fixed. cdrecord -scanbus show my TEAC 512 writer. /proc/scsi/tmscsim/5 shows sync-speed 5.0M. Fine!

Can I remove the debugging statements?

Yes! Now you are allowed to remove all the debugging!:-) And the last thing I would ask you to try - is a bit of stress-testing. Try burning some CDs (ok, you can burn re-writables, although, they tend to be slower than recordables), put some load in parallel, mount dome CDs, dd from them (dd if=/dev/scd0 of=/dev/null), play some music from them. Do you have any other SCSI devices you could connect to it? But, you know, AM53C974 is not the most performant SCSI-controller:-) Actually, when I just completed initial porting it to 2.6, I said, it would be nice to test it on some HIGHMEM / 64bit platforms, and somebody replied, that, probably, nobody would ever think of using this chip on such a system:-)

And, please post output of your /proc/scsi/scsi and /proc/scsi/tmscsim/...

Thanks for your help!
Guennadi
---
Guennadi Liakhovetski

#8 lore raw

Hello,

today I have patched a fresh vanilla-2.6.5 with your code. I changed some lines (Do you use 2.6.3?).

I have burned CDs and did parallel reading with cp and two instances of dd=...

I tested a CD with sector errors and one without errors. The code seems to be stable.

Below you can find my changed version of your patch (for 2.6.5)

Thanks for your help

Auf Wiedersehen

Christian

Am Dienstag, 13. April 2004 22:40 schrieben Sie:

Quoted 23 lines · Christian Roessner
Quoted 4 lines

great! Problem fixed. cdrecord -scanbus show my TEAC 512 writer. /proc/scsi/tmscsim/5 shows sync-speed 5.0M. Fine!

Can I remove the debugging statements?

Yes! Now you are allowed to remove all the debugging!:-) And the last thing I would ask you to try - is a bit of stress-testing. Try burning some CDs (ok, you can burn re-writables, although, they tend to be slower than recordables), put some load in parallel, mount dome CDs, dd from them (dd if=/dev/scd0 of=/dev/null), play some music from them. Do you have any other SCSI devices you could connect to it? But, you know, AM53C974 is not the most performant SCSI-controller:-) Actually, when I just completed initial porting it to 2.6, I said, it would be nice to test it on some HIGHMEM / 64bit platforms, and somebody replied, that, probably, nobody would ever think of using this chip on such a system:-)

And, please post output of your /proc/scsi/scsi and /proc/scsi/tmscsim/...

Thanks for your help!
Guennadi
---
Guennadi Liakhovetski

Signature · 5 lines
Roessner Network Solutions (R.N.S.)

Tel.: 0641-2097252, Fax: 0641-2097253, Mobil: 0171-3611230
URL: http://www.roessner-net.com/
PGP: http://www.roessner-net.com/0x6A549505.asc
drivers/scsi/tmscsim.c +12 -8
@@ -168,6 +168,7 @@
  *	2.1a  03/11/29  GL, KG	Initial fixing for 2.6. Convert to	*
  *				use the current PCI-mapping API, update	*
  *				command-queuing.			*
+ *	2.1b  04/04/13  GL	Fix for 64-bit platforms		*
  ***********************************************************************/
 
 /* Uncomment SA_INTERRUPT, if the driver refuses to share its IRQ with other devices */
@@ -1022,7 +1023,7 @@
 			pci_map_page(pdev, virt_to_page(pcmd->sense_buffer),
 				     (unsigned long)pcmd->sense_buffer & ~PAGE_MASK, sizeof(pcmd->sense_buffer),
 				     DMA_FROM_DEVICE);
-		pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
@@ -1043,7 +1044,7 @@
 				     (unsigned long)pcmd->request_buffer & ~PAGE_MASK,
 				     pcmd->request_bufflen, scsi_to_pci_dma_dir(pcmd->sc_data_direction));
 		/* TODO: error handling */
-		pSRB->Segmentx.length = pcmd->request_bufflen;
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped request buffer %p at %x\n", __FUNCTION__, pcmd->request_buffer, cmdp->saved_dma_handle));
@@ -1131,7 +1132,7 @@
 	if (!pcmd) { dc390_Free_insert (pACB, pSRB); return; } /* should not happen */
 	pDCB = dc390_findDCB (pACB, pcmd->device->id, pcmd->device->lun);
 	if (!pDCB) 
-	{ 
+	{
 		dc390_Free_insert (pACB, pSRB);
 		printk (KERN_ERR "DC390: Command in queue to non-existing device!\n");
 		pcmd->result = MK_RES(DRIVER_ERROR,DID_ERROR,0,0);
@@ -1180,7 +1181,7 @@
     /* Assume BAD_TARGET; will be cleared later */
     cmd->result = DID_BAD_TARGET << 16;
    
-    /* TODO: Change the policy: Alway accept TEST_UNIT_READY or INQUIRY 
+    /* TODO: Change the policy: Always accept TEST_UNIT_READY or INQUIRY 
      * commands and alloc a DCB for the device if not yet there. DCB will
      * be removed in dc390_SRBdone if SEL_TIMEOUT */
 
@@ -1767,7 +1768,7 @@
     PDCB pDCB, pDCB2;
 
     pDCB = kmalloc (sizeof(DC390_DCB), GFP_ATOMIC);
-    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n"	\
+    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n",	\
 		     id, lun, pDCB));
  
     *ppDCB = pDCB;
@@ -2221,7 +2222,7 @@
 {
     PDEVDECL0;
     UCHAR   irq;
-    UINT    io_port;
+    ULONG   io_port;
 
     //dc390_pSHT_start = psht;
     dc390_pACB_start = NULL;
@@ -2229,10 +2230,13 @@
     if ( PCI_PRESENT )
 	while (PCI_FIND_DEVICE (PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD53C974))
 	{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,30)
 	    if (pci_enable_device (pdev))
 		continue;
-#endif
+
+	    if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		    printk(KERN_ERR "DC390(%i): No suitable DMA available.\n", dc390_adapterCnt);
+		    continue;
+	    }
 	    PCI_GET_IO_AND_IRQ;
 	    DEBUG0(printk(KERN_INFO "DC390(%i): IO_PORT=%04x,IRQ=%x\n", dc390_adapterCnt, (UINT) io_port, irq));
 
drivers/scsi/scsiiom.c +7 -5
@@ -521,7 +521,7 @@
     {
 	    DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
 	    DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_IDLE_CMD); /* | DMA_INT */
-    }	    
+    }
 }
 
 static void
@@ -740,9 +740,9 @@
 	psgl = pSRB->pSegmentList;
 	//dc390_pci_sync(pSRB);
 
-	while (pSRB->TotalXferredLen + (ULONG) psgl->length < pSRB->Saved_Ptr)
+	while (pSRB->TotalXferredLen + (ULONG) sg_dma_len(psgl) < pSRB->Saved_Ptr)
 	{
-	    pSRB->TotalXferredLen += (ULONG) psgl->length;
+	    pSRB->TotalXferredLen += (ULONG) sg_dma_len(psgl);
 	    pSRB->SGIndex++;
 	    if( pSRB->SGIndex < pSRB->SGcount )
 	    {
@@ -762,7 +762,7 @@
     } else if(pcmd->request_buffer) {
 	//dc390_pci_sync(pSRB);
 
-	pSRB->Segmentx.length = pcmd->request_bufflen - pSRB->Saved_Ptr;
+	sg_dma_len(&pSRB->Segmentx) = pcmd->request_bufflen - pSRB->Saved_Ptr;
 	pSRB->SGcount = 1;
 	pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
     } else {
@@ -885,6 +885,8 @@
 	if (pDCB) printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (%02i-%i)\n",
 			  pDCB->TargetID, pDCB->TargetLUN);
 	else printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (DCB 0!)\n");
+
+	pSRB->pSRBDCB = pDCB;
 	dc390_EnableMsgOut_Abort (pACB, pSRB);
 	if (pDCB) pDCB->DCBFlag |= ABORT_DEV;
 	return;
@@ -1466,7 +1468,7 @@
 		ptr2 = pSRB->pSegmentList;
 		for( i=pSRB->SGIndex; i < bval; i++)
 		{
-		    swlval += ptr2->length;
+		    swlval += sg_dma_len(ptr2);
 		    ptr2++;
 		}
 		REMOVABLEDEBUG(printk(KERN_INFO "XferredLen=%08x,NotXferLen=%08x\n",\
drivers/scsi/dc390.h +1 -1
@@ -19,7 +19,7 @@
 #endif
 
 #define DC390_BANNER "Tekram DC390/AM53C974"
-#define DC390_VERSION "2.0f 2000-12-20"
+#define DC390_VERSION "2.1b 2004-04-13"
 
 /* We don't have eh_abort_handler, eh_device_reset_handler, 
  * eh_bus_reset_handler, eh_host_reset_handler yet! 
#9 lore raw
Quoted 2 lines · Roessner Christian

today I have patched a fresh vanilla-2.6.5 with your code. I changed some lines (Do you use 2.6.3?).

Ohh, ok:-) If you diff the 2 patches, you'll see, that the only difference is directory names:-) I did re-generate it against 2.6.5, it's just that I forgot to update directory-names. So, if you apply it with -p1, it doesn't really matter, although, I must confess, it is a bit confusing:-)

Quoted 4 lines

I have burned CDs and did parallel reading with cp and two instances of dd=...

I tested a CD with sector errors and one without errors. The code seems to be stable.

Good! James, could we get it into the mainline?

Thanks
Guennadi
---
Guennadi Liakhovetski

#10 lore raw
In reply to Guennadi Liakhovetski

Sorry, forgot to send /proc-stuff:

/proc/scsi/scsi:

Host: scsi1 Channel: 00 Id: 04 Lun: 00
Vendor: TEAC Model: CD-W512SB Rev: 1.0B
Type: CD-ROM ANSI SCSI revision: 02

/proc/scsi/tmscsim/1:

Tekram DC390/AM53C974 PCI SCSI Host Adapter, Driver Version 2.1b 2004-04-13 SCSI Host Nr 1, AM53C974 Adapter Nr 0
IOPortBase 0x9400, IRQ 11
MaxID 7, MaxLUN 1, AdapterID 7, SelTimeout 250 ms, DelayReset 1 s TagMaxNum 16, Status 0x00, ACBFlag 0x00, GlitchEater 24 ns
Statistics: Cmnds 91786, Cmnds not sent directly 76000, Out of SRB conds 0
Lost arbitrations 0, Sel. connected 0, Connected: No
Nr of attached devices: 1, Nr of DCBs: 1
Map of attached LUNs: 00 00 00 00 01 00 00 00
Idx ID LUN Prty Sync DsCn SndS TagQ NegoPeriod SyncSpeed SyncOffs MaxCmd
00 04 00 Yes Yes Yes Yes No 200 ns 5.0 M 08 01
Commands in Queues: Query: 0:

Regards

Christian

#11 lore raw
In reply to Christian Roessner
Quoted 2 lines · Christian Roessner

great! Problem fixed. cdrecord -scanbus show my TEAC 512 writer. /proc/scsi/tmscsim/5 shows sync-speed 5.0M. Fine!

Ok, here goes a cumulative patch, that (hopefully) fixes tmscsim on 64-bit platforms. Christian, would be nice if you could test it again in its final form against a vanilla 2.6.5. I don't know if there's anybody else using AM53C974 on 64-bit:-)

It doesn't conflict (AFAIR) with other pending tmscsim patches, but, unlike those, this one fixes an actual bug, so, should have a higher priority.

Kurt, please, could we somehow get those outstanding patches moving?

Thanks
Guennadi
---
Guennadi Liakhovetski

drivers/scsi/tmscsim.c +12 -8
diff -u linux-2.6.3/drivers/scsi/tmscsim.c linux-2.6.3.hardlink/drivers/scsi/tmscsim.c
@@ -168,6 +168,7 @@
  *	2.1a  03/11/29  GL, KG	Initial fixing for 2.6. Convert to	*
  *				use the current PCI-mapping API, update	*
  *				command-queuing.			*
+ *	2.1b  04/04/13  GL	Fix for 64-bit platforms		*
  ***********************************************************************/
 
 /* Uncomment SA_INTERRUPT, if the driver refuses to share its IRQ with other devices */
@@ -1022,7 +1023,7 @@
 			pci_map_page(pdev, virt_to_page(pcmd->sense_buffer),
 				     (unsigned long)pcmd->sense_buffer & ~PAGE_MASK, sizeof(pcmd->sense_buffer),
 				     DMA_FROM_DEVICE);
-		pSRB->Segmentx.length = sizeof(pcmd->sense_buffer);
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __FUNCTION__, pcmd->sense_buffer, cmdp->saved_dma_handle));
@@ -1043,7 +1044,7 @@
 				     (unsigned long)pcmd->request_buffer & ~PAGE_MASK,
 				     pcmd->request_bufflen, scsi_to_pci_dma_dir(pcmd->sc_data_direction));
 		/* TODO: error handling */
-		pSRB->Segmentx.length = pcmd->request_bufflen;
+		sg_dma_len(&pSRB->Segmentx) = sizeof(pcmd->sense_buffer);
 		pSRB->SGcount = 1;
 		pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
 		DEBUG1(printk("%s(): Mapped request buffer %p at %x\n", __FUNCTION__, pcmd->request_buffer, cmdp->saved_dma_handle));
@@ -1131,7 +1132,7 @@
 	if (!pcmd) { dc390_Free_insert (pACB, pSRB); return; } /* should not happen */
 	pDCB = dc390_findDCB (pACB, pcmd->device->id, pcmd->device->lun);
 	if (!pDCB) 
-	{ 
+	{
 		dc390_Free_insert (pACB, pSRB);
 		printk (KERN_ERR "DC390: Command in queue to non-existing device!\n");
 		pcmd->result = MK_RES(DRIVER_ERROR,DID_ERROR,0,0);
@@ -1180,7 +1181,7 @@
     /* Assume BAD_TARGET; will be cleared later */
     cmd->result = DID_BAD_TARGET << 16;
    
-    /* TODO: Change the policy: Alway accept TEST_UNIT_READY or INQUIRY 
+    /* TODO: Change the policy: Always accept TEST_UNIT_READY or INQUIRY 
      * commands and alloc a DCB for the device if not yet there. DCB will
      * be removed in dc390_SRBdone if SEL_TIMEOUT */
 
@@ -1767,7 +1768,7 @@
     PDCB pDCB, pDCB2;
 
     pDCB = kmalloc (sizeof(DC390_DCB), GFP_ATOMIC);
-    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n"	\
+    DCBDEBUG(printk (KERN_INFO "DC390: alloc mem for DCB (ID %i, LUN %i): %p\n",	\
 		     id, lun, pDCB));
  
     *ppDCB = pDCB;
@@ -2221,7 +2222,7 @@
 {
     PDEVDECL0;
     UCHAR   irq;
-    UINT    io_port;
+    ULONG   io_port;
 
     //dc390_pSHT_start = psht;
     dc390_pACB_start = NULL;
@@ -2229,10 +2230,13 @@
     if ( PCI_PRESENT )
 	while (PCI_FIND_DEVICE (PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD53C974))
 	{
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,30)
 	    if (pci_enable_device (pdev))
 		continue;
-#endif
+
+	    if (pci_set_dma_mask(pdev, 0xffffffff)) {
+		    printk(KERN_ERR "DC390(%i): No suitable DMA available.\n", dc390_adapterCnt);
+		    continue;
+	    }
 	    PCI_GET_IO_AND_IRQ;
 	    DEBUG0(printk(KERN_INFO "DC390(%i): IO_PORT=%04x,IRQ=%x\n", dc390_adapterCnt, (UINT) io_port, irq));
 
drivers/scsi/scsiiom.c +7 -5
diff -u linux-2.6.3/drivers/scsi/scsiiom.c linux-2.6.3.hardlink/drivers/scsi/scsiiom.c
@@ -521,7 +521,7 @@
     {
 	    DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
 	    DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_IDLE_CMD); /* | DMA_INT */
-    }	    
+    }
 }
 
 static void
@@ -740,9 +740,9 @@
 	psgl = pSRB->pSegmentList;
 	//dc390_pci_sync(pSRB);
 
-	while (pSRB->TotalXferredLen + (ULONG) psgl->length < pSRB->Saved_Ptr)
+	while (pSRB->TotalXferredLen + (ULONG) sg_dma_len(psgl) < pSRB->Saved_Ptr)
 	{
-	    pSRB->TotalXferredLen += (ULONG) psgl->length;
+	    pSRB->TotalXferredLen += (ULONG) sg_dma_len(psgl);
 	    pSRB->SGIndex++;
 	    if( pSRB->SGIndex < pSRB->SGcount )
 	    {
@@ -762,7 +762,7 @@
     } else if(pcmd->request_buffer) {
 	//dc390_pci_sync(pSRB);
 
-	pSRB->Segmentx.length = pcmd->request_bufflen - pSRB->Saved_Ptr;
+	sg_dma_len(&pSRB->Segmentx) = pcmd->request_bufflen - pSRB->Saved_Ptr;
 	pSRB->SGcount = 1;
 	pSRB->pSegmentList = (PSGL) &pSRB->Segmentx;
     } else {
@@ -885,6 +885,8 @@
 	if (pDCB) printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (%02i-%i)\n",
 			  pDCB->TargetID, pDCB->TargetLUN);
 	else printk (KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (DCB 0!)\n");
+
+	pSRB->pSRBDCB = pDCB;
 	dc390_EnableMsgOut_Abort (pACB, pSRB);
 	if (pDCB) pDCB->DCBFlag |= ABORT_DEV;
 	return;
@@ -1466,7 +1468,7 @@
 		ptr2 = pSRB->pSegmentList;
 		for( i=pSRB->SGIndex; i < bval; i++)
 		{
-		    swlval += ptr2->length;
+		    swlval += sg_dma_len(ptr2);
 		    ptr2++;
 		}
 		REMOVABLEDEBUG(printk(KERN_INFO "XferredLen=%08x,NotXferLen=%08x\n",\
drivers/scsi/dc390.h +1 -1
diff -u linux-2.6.3/drivers/scsi/dc390.h linux-2.6.3.hardlink/drivers/scsi/dc390.h
@@ -19,7 +19,7 @@
 #endif
 
 #define DC390_BANNER "Tekram DC390/AM53C974"
-#define DC390_VERSION "2.0f 2000-12-20"
+#define DC390_VERSION "2.1b 2004-04-13"
 
 /* We don't have eh_abort_handler, eh_device_reset_handler, 
  * eh_bus_reset_handler, eh_host_reset_handler yet!