Fix bpf_link grace period wait for tracepoints
Kumar Kartikeya Dwivedi
maintainerv4 cover Fix bpf_link grace period wait for tracepoints
A recent change to non-faultable tracepoints switched from preempt-disabled critical sections to SRCU-fast, which breaks assumptions in the bpf_link_free() path. Use call_srcu() to fix the breakage.
Changelog:
----------
v3 -> v4
v3: https://lore.kernel.org/bpf/[email protected]
* Introduce call_tracepoint_unregister_{atomic,syscall} instead. (Alexei, Steven)
v2 -> v3
v2: https://lore.kernel.org/bpf/[email protected]
* Introduce and switch to call_tracepoint_unregister_non_faultable(). (Steven)
* Address Andrii's comment and add Acked-by. (Andrii)
* Drop rcu_trace_implies_rcu_gp() conversion. (Alexei)
v1 -> v2
v1: https://lore.kernel.org/bpf/[email protected]
* Add Reviewed-by tags. (Paul, Puranjay)
* Adjust commit descriptions and comments to clarify intent. (Puranjay)
Kumar Kartikeya Dwivedi (1):
bpf: Fix grace period wait for tracepoint bpf_link
include/linux/bpf.h | 4 ++++ include/linux/tracepoint.h | 20 ++++++++++++++++++++ kernel/bpf/syscall.c | 25 +++++++++++++++++++++++-- 3 files changed, 47 insertions(+), 2 deletions(-)
base-commit: c369299895a591d96745d6492d4888259b004a9e
Signature · 1 line
2.52.0
Kumar Kartikeya Dwivedi
maintainerPATCH v4 1/1 bpf: Fix grace period wait for tracepoint bpf_link
Recently, tracepoints were switched from using disabled preemption (which acts as RCU read section) to SRCU-fast when they are not faultable. This means that to do a proper grace period wait for programs running in such tracepoints, we must use SRCU's grace period wait. This is only for non-faultable tracepoints, faultable ones continue using RCU Tasks Trace.
However, bpf_link_free() currently does call_rcu() for all cases when the link is non-sleepable (hence, for tracepoints, non-faultable). Fix this by doing a call_srcu() grace period wait.
As far RCU Tasks Trace gp -> RCU gp chaining is concerned, it is deemed unnecessary for tracepoint programs. The link and program are either accessed under RCU Tasks Trace protection, or SRCU-fast protection now.
The earlier logic of chaining both RCU Tasks Trace and RCU gp waits was to generalize the logic, even if it conceded an extra RCU gp wait, however that is unnecessary for tracepoints even before this change. In practice no cost was paid since rcu_trace_implies_rcu_gp() was always true. Hence we need not chaining any RCU gp after the SRCU gp.
For instance, in the non-faultable raw tracepoint, the RCU read section of the program in __bpf_trace_run() is enclosed in the SRCU gp, likewise for faultable raw tracepoint, the program is under the RCU Tasks Trace protection. Hence, the outermost scope can be waited upon to ensure correctness.
Also, sleepable programs cannot be attached to non-faultable tracepoints, so whenever program or link is sleepable, only RCU Tasks Trace protection is being used for the link and prog.
--- include/linux/bpf.h | 4 ++++ include/linux/tracepoint.h | 20 ++++++++++++++++++++ kernel/bpf/syscall.c | 25 +++++++++++++++++++++++-- 3 files changed, 47 insertions(+), 2 deletions(-)
include/linux/bpf.h +4 -0
@@ -1854,6 +1854,10 @@ struct bpf_link_ops {* target hook is sleepable, we'll go through tasks trace RCU GP and * then "classic" RCU GP; this need for chaining tasks trace and * classic RCU GPs is designated by setting bpf_link->sleepable flag +* +* For non-sleepable tracepoint links we go through SRCU gp instead, +* since RCU is not used in that case. Sleepable tracepoints still +* follow the scheme above. */ void (*dealloc_deferred)(struct bpf_link *link);int (*detach)(struct bpf_link *link);
include/linux/tracepoint.h +20 -0
@@ -122,6 +122,22 @@ static inline bool tracepoint_is_faultable(struct tracepoint *tp) {return tp->ext && tp->ext->faultable; } +/* +* Run RCU callback with the appropriate grace period wait for non-faultable +* tracepoints, e.g., those used in atomic context. +*/ +static inline void call_tracepoint_unregister_atomic (struct rcu_head *rcu,rcu_callback_t func) +{ +call_srcu (&tracepoint_srcu, rcu, func); +} +/* +* Run RCU callback with the appropriate grace period wait for faultable +* tracepoints, e.g., those used in syscall context. +*/ +static inline void call_tracepoint_unregister_syscall (struct rcu_head *rcu,rcu_callback_t func) +{ +call_rcu_tasks_trace (rcu, func); +}#else static inline void tracepoint_synchronize_unregister (void ) { }
@@ -129,6 +145,10 @@ static inline bool tracepoint_is_faultable(struct tracepoint *tp) {return false; } +static inline void call_tracepoint_unregister_atomic (struct rcu_head *rcu,rcu_callback_t func) +{ } +static inline void call_tracepoint_unregister_syscall (struct rcu_head *rcu,rcu_callback_t func) +{ }#endif #ifdef CONFIG_HAVE_SYSCALL_TRACEPOINTS
kernel/bpf/syscall.c +23 -2
@@ -3261,6 +3261,18 @@ static void bpf_link_defer_dealloc_rcu_gp(struct rcu_head *rcu)bpf_link_dealloc (link); } +static bool bpf_link_is_tracepoint (struct bpf_link *link) +{ +/* +* Only these combinations support a tracepoint bpf_link. +* BPF_LINK_TYPE_TRACING raw_tp progs are hardcoded to use +* bpf_raw_tp_link_lops and thus dealloc_deferred(), see +* bpf_raw_tp_link_attach(). +*/ +return link->type ==BPF_LINK_TYPE_RAW_TRACEPOINT || + (link->type ==BPF_LINK_TYPE_TRACING && link->attach_type ==BPF_TRACE_RAW_TP ); +} +static void bpf_link_defer_dealloc_mult_rcu_gp (struct rcu_head *rcu) {if (rcu_trace_implies_rcu_gp ())
@@ -3279,16 +3291,25 @@ static void bpf_link_free(struct bpf_link *link)if (link->prog) ops->release (link);if (ops->dealloc_deferred) { -/* Schedule BPF link deallocation, which will only then +/* +* Schedule BPF link deallocation, which will only then * trigger putting BPF program refcount. * If underlying BPF program is sleepable or BPF link's target * attach hookpoint is sleepable or otherwise requires RCU GPs * to ensure link and its underlying BPF program is not * reachable anymore, we need to first wait for RCU tasks -* trace sync, and then go through "classic" RCU grace period +* trace sync, and then go through "classic" RCU grace period. +* +* For tracepoint BPF links, we need to go through SRCU grace +* period wait instead when non-faultable tracepoint is used. We +* don't need to chain SRCU grace period waits, however, for the +* faultable case, since it exclusively uses RCU Tasks Trace. */ if (link->sleepable || (link->prog && link->prog->sleepable))call_rcu_tasks_trace (&link->rcu, bpf_link_defer_dealloc_mult_rcu_gp); +/* We need to do a SRCU grace period wait for non-faultable tracepoint BPF links. */ +else if (bpf_link_is_tracepoint (link)) +call_tracepoint_unregister_atomic (&link->rcu, bpf_link_defer_dealloc_rcu_gp);else call_rcu (&link->rcu, bpf_link_defer_dealloc_rcu_gp); }else if (ops->dealloc) {
Signature · 1 line
2.52.0
Re: [PATCH bpf v4 1/1] bpf: Fix grace period wait for tracepoint bpf_link
Quoted 28 lines · On Tue, 31 Mar 2026 23:10:20 +0200 Kumar Kartikeya Dwivedi <[email protected]>…
include/linux/tracepoint.h +16
-0@@ -122,6 +122,22 @@ static inline bool tracepoint_is_faultable(struct tracepoint *tp) {return tp->ext && tp->ext->faultable; } +/* +* Run RCU callback with the appropriate grace period wait for non-faultable +* tracepoints, e.g., those used in atomic context. +*/ +static inline void call_tracepoint_unregister_atomic (struct rcu_head *rcu,rcu_callback_t func) +{ +call_srcu (&tracepoint_srcu, rcu, func); +} +/* +* Run RCU callback with the appropriate grace period wait for faultable +* tracepoints, e.g., those used in syscall context. +*/ +static inline void call_tracepoint_unregister_syscall (struct rcu_head *rcu,rcu_callback_t func) +{ +call_rcu_tasks_trace (rcu, func); +}#else static inline void tracepoint_synchronize_unregister (void ) { }
include/linux/tracepoint.h static inline bool tracepoint_is_faultable(struct tracepoint *tp) · line 153
Quoted 9 lines
include/linux/tracepoint.h +4
-0@@ -129,6 +145,10 @@ static inline bool tracepoint_is_faultable(struct tracepoint *tp) {return false; } +static inline void call_tracepoint_unregister_atomic (struct rcu_head *rcu,rcu_callback_t func) +{ } +static inline void call_tracepoint_unregister_syscall (struct rcu_head *rcu,rcu_callback_t func) +{ }#endif
-- Steve
This patch was applied to bpf/bpf.git (master) by Alexei Starovoitov <[email protected]>:
Hello:
This patch was applied to bpf/bpf.git (master)
by Alexei Starovoitov <[email protected]>:
Quoted 8 lines · On Tue, 31 Mar 2026 23:10:19 +0200 you wrote:
A recent change to non-faultable tracepoints switched from preempt-disabled critical sections to SRCU-fast, which breaks assumptions in the
bpf_link_free()path. Usecall_srcu()to fix the breakage.Changelog:
[...]
Here is the summary with links:
- [bpf,v4,1/1] bpf: Fix grace period wait for tracepoint bpf_link
https://git.kernel.org/bpf/bpf/c/c76fef7dcd93
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html