Skip to contentSkip to conversation

net/mlx5: Add vhca_id_type support to IPsec alias creation

PATCH Applied Tariq Toukan 3 participants 3 messages Apr 30 – May 2

Subsystems (4)
lore
Share & tools
lore

Tariq Toukan

author maintainer
#0 lore raw

PATCH 1/1 net/mlx5: Add vhca_id_type support to IPsec alias creation

From: Patrisious Haddad <[email protected]>

When creating an alias FT for MPV IPsec, if alias creation with sw_vhca_id is supported use it instead of using the hw_vhca_id.

This in turn allows IPsec to work properly after live migration, in case a VF was live migrated and his hw_vhca_id changed due to migration which can happen if you migrate to a VF with a different index than yours, IPsec would fail to start post migration, this patch resolves the issue by using sw_vhca_id instead which doesn't change post migration.

---
 drivers/net/ethernet/mellanox/mlx5/core/cmd.c          |  1 +
 .../ethernet/mellanox/mlx5/core/lib/ipsec_fs_roce.c    | 10 ++++++++++
 drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h    |  1 +
 3 files changed, 12 insertions(+)
drivers/net/ethernet/mellanox/mlx5/core/cmd.c +1 -0
index c89417c1a1f9..b5c8fbfb0eed 100644
@@ -2306,6 +2306,7 @@ int mlx5_cmd_alias_obj_create(struct mlx5_core_dev *dev,
 
 	attr = MLX5_ADDR_OF(create_alias_obj_in, in, alias_ctx);
 	MLX5_SET(alias_context, attr, vhca_id_to_be_accessed, alias_attr->vhca_id);
+	MLX5_SET(alias_context, attr, vhca_id_type, alias_attr->vhca_id_type);
 	MLX5_SET(alias_context, attr, object_id_to_be_accessed, alias_attr->obj_id);
 
 	key = MLX5_ADDR_OF(alias_context, attr, access_key);
drivers/net/ethernet/mellanox/mlx5/core/lib/ipsec_fs_roce.c +10 -0
index 28cb670ba33e..9aadb20b8b8e 100644
@@ -116,6 +116,16 @@ static int ipsec_fs_create_aliased_ft(struct mlx5_core_dev *ibv_owner,
 	memcpy(alias_attr.access_key, alias_key, ACCESS_KEY_LEN);
 	alias_attr.obj_id = aliased_object_id;
 	alias_attr.obj_type = MLX5_GENERAL_OBJECT_TYPES_FLOW_TABLE_ALIAS;
+	if (MLX5_CAP_GEN_2(ibv_owner, sw_vhca_id_valid) &&
+	    MLX5_CAP_GEN(ibv_allowed, ft_alias_sw_vhca_id)) {
+		vhca_id_to_be_accessed = MLX5_CAP_GEN_2(ibv_owner, sw_vhca_id);
+		alias_attr.vhca_id_type = VHCA_ID_TYPE_SW;
+	} else {
+		vhca_id_to_be_accessed = MLX5_CAP_GEN(ibv_owner, vhca_id);
+		alias_attr.vhca_id_type = VHCA_ID_TYPE_HW;
+		if (MLX5_CAP_GEN_2(ibv_owner, sw_vhca_id_valid))
+			mlx5_core_warn(ibv_owner, "IPsec with migration isn't supported, if migration is required update FW.\n");
+	}
 	alias_attr.vhca_id = vhca_id_to_be_accessed;
 	ret = mlx5_cmd_alias_obj_create(ibv_allowed, &alias_attr, obj_id);
 	if (ret) {
drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.h +1 -0
index 1507e881d962..8730cabbb5a8 100644
@@ -110,6 +110,7 @@ struct mlx5_cmd_allow_other_vhca_access_attr {
 struct mlx5_cmd_alias_obj_create_attr {
 	u32 obj_id;
 	u16 vhca_id;
+	u8 vhca_id_type;
 	u16 obj_type;
 	u8 access_key[ACCESS_KEY_LEN];
 };

base-commit: 09942ddedcb960f9e78fd817ec33f501d1040c5b

Signature · 1 line
2.44.0
reviewer Reviewed-by on v1 1/1
#1 lore raw
Quoted 12 lines · Tariq Toukan

From: Patrisious Haddad <[email protected]>

When creating an alias FT for MPV IPsec, if alias creation with sw_vhca_id is supported use it instead of using the hw_vhca_id.

This in turn allows IPsec to work properly after live migration, in case a VF was live migrated and his hw_vhca_id changed due to migration which can happen if you migrate to a VF with a different index than yours, IPsec would fail to start post migration, this patch resolves the issue by using sw_vhca_id instead which doesn't change post migration.

Quoted 3 lines
#2 lore raw
In reply to Tariq Toukan
This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 5 lines · On Thu, 30 Apr 2026 09:19:58 +0300 you wrote:

From: Patrisious Haddad <[email protected]>

When creating an alias FT for MPV IPsec, if alias creation with sw_vhca_id is supported use it instead of using the hw_vhca_id.

Quoted 8 lines

This in turn allows IPsec to work properly after live migration, in case a VF was live migrated and his hw_vhca_id changed due to migration which can happen if you migrate to a VF with a different index than yours, IPsec would fail to start post migration, this patch resolves the issue by using sw_vhca_id instead which doesn't change post migration.

[...]

Here is the summary with links:
- [net-next] net/mlx5: Add vhca_id_type support to IPsec alias creation

    https://git.kernel.org/netdev/net-next/c/c8300af614b2

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html