Skip to contentSkip to conversation

USB: serial: option: NET: usb: qmi_wwan: add MeiG SRM813Q

PATCH Superseded Jan Volckaert 3 participants 7 messages May 8 – May 21

Subsystems (6)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 USB: serial: option: NET: usb: qmi_wwan: add MeiG SRM813Q

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
---
 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)
drivers/net/usb/qmi_wwan.c +2 -0
index 05acac10cd2b..94cdb61dca83 100644
@@ -1452,6 +1452,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 	{QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */
 	{QMI_FIXED_INTF(0x2dee, 0x4d22, 5)},    /* MeiG Smart SRM825L */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d63, 0)}, /* MeiG SRM813Q w/ Modem(PPP) */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d64, 0)}, /* MeiG SRM813Q w/ NMEA */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
drivers/usb/serial/option.c +6 -0
index c71461893d20..e3827b1e4f27 100644
@@ -2446,6 +2446,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x30) },	/* MeiG Smart SRM825WN (Diag) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x40) },	/* MeiG Smart SRM825WN (AT) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x60) },	/* MeiG Smart SRM825WN (NMEA) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x60) },	/* MeiG SRM813Q (NMEA) */
+
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
Signature · 1 line
2.43.0
maintainer
#1 lore raw
Quoted 7 lines · Jan Volckaert

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

---
 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)

Please split this in two patches as they will go in through different trees.

Johan

#2 lore raw

v2 cover USB: add MeiG SRM813Q IDs in qmi_wwan and option

Add MeiG SRM813Q support by adding USB IDs to:
- qmi_wwan for the network interface
- option for serial interfaces

Split into two patches so each change goes through its respective maintainer tree (net and usb-serial).

Jan Volckaert (2):
NET: usb: qmi_wwan: add MeiG SRM813Q
USB: serial: option: add MeiG SRM813Q

 drivers/net/usb/qmi_wwan.c  | 2 ++
 drivers/usb/serial/option.c | 6 ++++++
 2 files changed, 8 insertions(+)

---
v2:
- Thanks to Johan Hovold for the review and guidance.
- split original submission into two patches per maintainer request
- Link: https://lore.kernel.org/all/[email protected]/#r

base-commit: 917719c412c48687d4a176965d1fa35320ec457c

Signature · 1 line
2.43.0
#3 lore raw

PATCH v2 1/2 NET: usb: qmi_wwan: add MeiG SRM813Q

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
---
 drivers/net/usb/qmi_wwan.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/net/usb/qmi_wwan.c +2 -0
index 05acac10cd2b..94cdb61dca83 100644
@@ -1452,6 +1452,8 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1546, 0x1342, 4)},	/* u-blox LARA-L6 */
 	{QMI_QUIRK_SET_DTR(0x33f8, 0x0104, 4)}, /* Rolling RW101 RMNET */
 	{QMI_FIXED_INTF(0x2dee, 0x4d22, 5)},    /* MeiG Smart SRM825L */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d63, 0)}, /* MeiG SRM813Q w/ Modem(PPP) */
+	{QMI_QUIRK_SET_DTR(0x2dee, 0x4d64, 0)}, /* MeiG SRM813Q w/ NMEA */
 
 	/* 4. Gobi 1000 devices */
 	{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)},	/* Acer Gobi Modem Device */
Signature · 1 line
2.43.0
#4 lore raw

PATCH v2 2/2 USB: serial: option: add MeiG SRM813Q

In reply to Jan Volckaert

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

MODEM - PPP mode(2dee:4d63): AT+SER=1,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: MODEM
If#= 3: AT

P:  Vendor=2dee ProdID=4d63 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms

NMEA mode(2dee:4d64): AT+SER=51,1

If#= 0: RMNET
If#= 1: DIAG/ADB
If#= 2: NMEA
If#= 3: AT

P:  Vendor=2dee ProdID=4d64 Rev=05.15
S:  Manufacturer=MEIG
S:  Product=LTE-A Module
S:  SerialNumber=1bd51f0e
C:  #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)
drivers/usb/serial/option.c +6 -0
index c71461893d20..e3827b1e4f27 100644
@@ -2446,6 +2446,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x30) },	/* MeiG Smart SRM825WN (Diag) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x40) },	/* MeiG Smart SRM825WN (AT) */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d38, 0xff, 0xff, 0x60) },	/* MeiG Smart SRM825WN (NMEA) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d63, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x30) },	/* MeiG SRM813Q (Diag) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x40) },	/* MeiG SRM813Q (AT) */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x2dee, 0x4d64, 0xff, 0xff, 0x60) },	/* MeiG SRM813Q (NMEA) */
+
 	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) },			/* GosunCn GM500 RNDIS */
 	{ USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) },			/* GosunCn GM500 MBIM */
Signature · 1 line
2.43.0
maintainer
#5 lore raw

Re: [PATCH v2 2/2] USB: serial: option: add MeiG SRM813Q

Quoted 3 lines · Jan Volckaert

Add support for the Qualcomm Technology Snapdragon X35-based MeiG SRM813Q module.

The module can be put in different modes via AT commands to enable/disable GPS functionality:

In the future, remember to wrap the commit messages at 72 columns or so.

Quoted 1 line

Now applied, thanks.

Johan

#6 lore raw

Re: [PATCH v2 0/2] USB: add MeiG SRM813Q IDs in qmi_wwan and option

In reply to Jan Volckaert
This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This series was applied to netdev/net-next.git (main) by Jakub Kicinski <[email protected]>:

Quoted 8 lines · On Sun, 17 May 2026 17:32:35 +0200 you wrote:

Add MeiG SRM813Q support by adding USB IDs to:
- qmi_wwan for the network interface
- option for serial interfaces

Split into two patches so each change goes through its respective maintainer tree (net and usb-serial).

[...]

Here is the summary with links:
- [v2,1/2] NET: usb: qmi_wwan: add MeiG SRM813Q

    https://git.kernel.org/netdev/net-next/c/9758c11fc6c1

- [v2,2/2] USB: serial: option: add MeiG SRM813Q (no matching commit)

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html