rseq/s390: choosing code signature
Subsystems (2)
Mathieu Desnoyers
maintainerHi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#define RSEQ_SIG 0x########
Ideally we'd need a patch on top of the Linux kernel tools/testing/selftests/rseq/rseq-s390.h file that updates the signature value, so I can then pick it up for the glibc patchset.
Thanks!
Mathieu
Signature · 3 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com
Quoted 32 lines · On Tue, 9 Apr 2019 15:32:22 -0400 (EDT) Mathieu Desnoyers…
Hi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#defineRSEQ_SIG0x########
Quoted 4 lines
Ideally we'd need a patch on top of the Linux kernel
tools/testing/selftests/rseq/rseq-s390.hfile that updates the signature value, so I can then pick it up for the glibc patchset.
The trap4 instruction is a suitable one. The patch would look like this --
commit 2ee28f6d1de968a71f074ab150384b90b4121216
Author: Martin Schwidefsky <[email protected]> Date: Wed Apr 10 12:28:41 2019 +0200
s390/rseq: use trap4 for RSEQ_SIG
Use trap4 as the guard instruction for the restartable sequence abort handler.
tools/testing/selftests/rseq/rseq-s390.h +8 -1
@@ -1,6 +1,13 @@/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ -#define RSEQ_SIG 0x53053053 +/* +* RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the +* access-register mode nor the linkage stack this instruction will always +* cause a special-operation exception (the trap-enabled bit in the DUCT +* is and will stay 0). The instruction pattern is +* b2 ff 0f ff trap4 4095(%r0) +*/ +#define RSEQ_SIG 0xB2FF0FFF#define rseq_smp_mb () __asm__ __volatile__ ("bcr 15,0" ::: "memory")#define rseq_smp_rmb () rseq_smp_mb()
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Mathieu Desnoyers
maintainerQuoted 35 lines · ----- On Apr 10, 2019, at 6:32 AM, schwidefsky [email protected] wrote:
Quoted 32 lines · On Tue, 9 Apr 2019 15:32:22 -0400 (EDT) Mathieu Desnoyers…
Hi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#defineRSEQ_SIG0x########
Quoted 6 lines
Quoted 4 lines
Ideally we'd need a patch on top of the Linux kernel
tools/testing/selftests/rseq/rseq-s390.hfile that updates the signature value, so I can then pick it up for the glibc patchset.The trap4 instruction is a suitable one. The patch would look like this
Great! I'm picking it up into my rseq tree if that's OK with you.
Thanks,
Mathieu
Quoted 37 lines
--
commit2ee28f6d1de968a71f074ab150384b90b4121216Author: Martin Schwidefsky <[email protected]> Date: Wed Apr 10 12:28:41 2019 +0200s390/rseq: use trap4 for
RSEQ_SIGUse trap4 as the guard instruction for the restartable sequence abort handler.
Signed-off-by Martin Schwidefsky <[email protected]>tools/testing/selftests/rseq/rseq-s390.h +8
-2@@ -1,6 +1,13 @@/* SPDX-License-Identifier: LGPL-2.1 OR MIT */ -#define RSEQ_SIG 0x53053053 +/* +* RSEQ_SIG uses the trap4 instruction. As Linux does not make use of the +* access-register mode nor the linkage stack this instruction will always +* cause a special-operation exception (the trap-enabled bit in the DUCT +* is and will stay 0). The instruction pattern is +* b2 ff 0f ff trap4 4095(%r0) +*/ +#define RSEQ_SIG 0xB2FF0FFF#define rseq_smp_mb () __asm__ __volatile__ ("bcr 15,0" ::: "memory")#define rseq_smp_rmb () rseq_smp_mb() --blue skies,
Martin."Reality continues to ruin my life." - Calvin.
Signature · 3 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com
Quoted 37 lines · On Wed, 10 Apr 2019 11:50:39 -0400 (EDT) Mathieu Desnoyers…
Quoted 35 lines · ----- On Apr 10, 2019, at 6:32 AM, schwidefsky [email protected] wrote:
Quoted 32 lines · On Tue, 9 Apr 2019 15:32:22 -0400 (EDT) Mathieu Desnoyers…
Hi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#defineRSEQ_SIG0x########
Quoted 8 lines
Quoted 6 lines
Quoted 4 lines
Ideally we'd need a patch on top of the Linux kernel
tools/testing/selftests/rseq/rseq-s390.hfile that updates the signature value, so I can then pick it up for the glibc patchset.The trap4 instruction is a suitable one. The patch would look like this
Great! I'm picking it up into my rseq tree if that's OK with you.
Just added the patch to s390/linux:features for the next merge window as well.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.
Mathieu Desnoyers
maintainerQuoted 45 lines · ----- On Apr 10, 2019, at 11:52 AM, schwidefsky [email protected] wrote:
Quoted 42 lines · On Wed, 10 Apr 2019 11:50:39 -0400 (EDT) Mathieu Desnoyers…
Quoted 40 lines · ----- On Apr 10, 2019, at 6:32 AM, schwidefsky [email protected] wrote:
Quoted 36 lines · On Tue, 9 Apr 2019 15:32:22 -0400 (EDT) Mathieu Desnoyers…
Hi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#defineRSEQ_SIG0x########Ideally we'd need a patch on top of the Linux kernel
tools/testing/selftests/rseq/rseq-s390.hfile that updates the signature value, so I can then pick it up for the glibc patchset.
Quoted 5 lines
Quoted 3 lines
Quoted 1 line
The trap4 instruction is a suitable one. The patch would look like this
Great! I'm picking it up into my rseq tree if that's OK with you.
Just added the patch to s390/linux:features for the next merge window as well.
Sounds good! I'll carry it in my tree to have a comprehensive up-to-date list of rseq signatures for all architectures in a single tree. Worse-case the exact same change will be pulled from both architecture and rseq trees, which I don't think should be an issue, right ?
Thanks,
Mathieu
Quoted 6 lines
--
blue skies,
Martin."Reality continues to ruin my life." - Calvin.
Signature · 3 lines
Mathieu Desnoyers EfficiOS Inc. http://www.efficios.com
Quoted 49 lines · On Wed, 10 Apr 2019 11:57:36 -0400 (EDT) Mathieu Desnoyers…
Quoted 47 lines · ----- On Apr 10, 2019, at 11:52 AM, schwidefsky [email protected] wrote:
Quoted 44 lines · On Wed, 10 Apr 2019 11:50:39 -0400 (EDT) Mathieu Desnoyers…
Quoted 41 lines · ----- On Apr 10, 2019, at 6:32 AM, schwidefsky [email protected] wrote:
Quoted 32 lines · On Tue, 9 Apr 2019 15:32:22 -0400 (EDT) Mathieu Desnoyers…
Hi,
We are about to include the code signature required prior to restartable sequences abort handlers into glibc, which will make this ABI choice final. We need architecture maintainer input on that signature value.
That code signature is placed before each abort handler, so the kernel can validate that it is indeed jumping to an abort handler (and not some arbitrary attacker-chosen code). The signature is never executed.
The current discussion thread on the glibc mailing list leads us towards using a trap with uncommon immediate operand, which simplifies integration with disassemblers, emulators, makes it easier to debug if the control flow gets redirected there by mistake, and is nicer for some architecture's speculative execution.
We can have different signatures for each sub-architecture, as long as they don't have to co-exist within the same process. We can special-case with #ifdef for each sub-architecture and endianness if need be. If the architecture has instruction set extensions that can co-exist with the architecture instruction set within the same process, we need to take into account to which instruction the chosen signature value would map (and possibly decide if we need to extend rseq to support many signatures).
Here is an example of rseq signature definition template:
/*
* TODO: document trap instruction objdump output on each sub-architecture
* instruction sets, as well as instruction set extensions.
*/
#defineRSEQ_SIG0x########Quoted 4 lines
Ideally we'd need a patch on top of the Linux kernel
tools/testing/selftests/rseq/rseq-s390.hfile that updates the signature value, so I can then pick it up for the glibc patchset.The trap4 instruction is a suitable one. The patch would look like this
Quoted 8 lines
Quoted 3 lines
Quoted 1 line
Great! I'm picking it up into my rseq tree if that's OK with you.
Just added the patch to s390/linux:features for the next merge window as well.
Sounds good! I'll carry it in my tree to have a comprehensive up-to-date list of rseq signatures for all architectures in a single tree. Worse-case the exact same change will be pulled from both architecture and rseq trees, which I don't think should be an issue, right ?
Should be fine, the worst that can happen is a minor merge conflict.
Signature · 4 lines
blue skies, Martin. "Reality continues to ruin my life." - Calvin.