Bluetooth: btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
PATCH 1/1 Bluetooth: btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
On BlazarIW, fast restart cycles fail because the D0 entry to MAC init does not complete in time. As a result, MAC initialization does not proceed and the controller fails to transition past the ROM boot stage.
Add a 50 ms delay (worst case as per HW analysis) before doing MAC init in btintel_pcie_enable_bt() so the shared hardware reset flow has time to complete. The delay is gated on the BlazarIW PCI device id 0x4D76 so other Intel BT PCIe controllers are unaffected.
--- drivers/bluetooth/btintel_pcie.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
drivers/bluetooth/btintel_pcie.c +13 -0
@@ -799,6 +799,11 @@ static void btintel_pcie_dump_traces(struct hci_dev *hdev)bt_dev_err (hdev,"Failed to dump traces: (%d)" , ret); } +static bool btintel_pcie_is_blazariw (struct pci_dev *pdev) +{ +return pdev->device ==0x4D76 ; +} +/* This function enables BT function by setting BTINTEL_PCIE_CSR_FUNC_CTRL_MAC_INIT bit in * BTINTEL_PCIE_CSR_FUNC_CTRL_REG register and wait for MSI-X with * BTINTEL_PCIE_MSIX_HW_INT_CAUSES_GP0.
@@ -818,6 +823,14 @@ static int btintel_pcie_enable_bt(struct btintel_pcie_data *data)btintel_pcie_wr_reg32 (data,BTINTEL_PCIE_CSR_CI_ADDR_MSB_REG , (u64 )data->ci_p_addr >>32 ); +/* On BlazarIW, the D0 entry to MAC init does not complete in +* time. Wait 50 ms (worst case as per HW analysis) for the +* shared hardware reset flow to complete before proceeding with +* MAC init. +*/ +if (btintel_pcie_is_blazariw (data->pdev)) +msleep (50 ); +/* Reset the cached value of boot stage. it is updated by the MSI-X * gp0 interrupt handler. */
Signature · 1 line
2.54.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1106883
---Test result---
Test Summary:
CheckPatch PASS 0.74 seconds VerifyFixes PASS 0.14 seconds VerifySignedoff PASS 0.14 seconds GitLint PASS 0.34 seconds SubjectPrefix PASS 0.13 seconds BuildKernel PASS 26.07 seconds CheckAllWarning PASS 28.22 seconds CheckSparse PASS 26.85 seconds BuildKernel32 PASS 25.06 seconds TestRunnerSetup PASS 531.09 seconds IncrementalBuild PASS 25.20 seconds
https://github.com/bluez/bluetooth-next/pull/290
---
Regards,
Linux Bluetooth
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 11 lines · On Sat, 6 Jun 2026 06:06:37 +0530 you wrote:
On BlazarIW, fast restart cycles fail because the D0 entry to MAC init does not complete in time. As a result, MAC initialization does not proceed and the controller fails to transition past the ROM boot stage.
Add a 50 ms delay (worst case as per HW analysis) before doing MAC init in
btintel_pcie_enable_bt()so the shared hardware reset flow has time to complete. The delay is gated on the BlazarIW PCI device id0x4D76so other Intel BT PCIe controllers are unaffected.[...]
Here is the summary with links:
- [v1] Bluetooth: btintel_pcie: Add 50 ms delay before MAC init on BlazarIW
https://git.kernel.org/bluetooth/bluetooth-next/c/202af099928b
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html