Skip to contentSkip to conversation

Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625

PATCH Applied monesss315 4 participants 7 messages Jun 23 – Jun 26 Bluetooth drivers

lore
Share & tools
lore

monesss315

author
#0 lore raw

PATCH 1/1 Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625

From: Gustavo Evgucci <[email protected]>

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not recognized as a MediaTek device because it is missing from the btusb device ID table. As a result, btmtk firmware loading is never triggered and the HCI reset command times out with -ETIMEDOUT.

Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags, consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630 entries which use the same chip.

Tested on: MediaTek MT7922 (Wi-Fi 6E combo card, IMC Networks BT USB interface), kernel 7.0.11-arch1-1.

Signed-off-by Gustavo Evgucci <[email protected]>
---
 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
@@ -755,6 +755,8 @@ static const struct usb_device_id btusb_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3613), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3625), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3627), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
Signature · 1 line
2.x.x
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1115344

---Test result---

Test Summary:

CheckPatch                    PASS      0.91 seconds
VerifyFixes                   PASS      0.15 seconds
VerifySignedoff               PASS      0.17 seconds
GitLint                       PASS      0.46 seconds
SubjectPrefix                 PASS      0.23 seconds
BuildKernel                   PASS      19.93 seconds
CheckAllWarning               PASS      21.83 seconds
CheckSparse                   PASS      27.75 seconds
BuildKernel32                 PASS      19.44 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      417.08 seconds
IncrementalBuild              PASS      19.35 seconds

Details
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/339

---
Regards,
Linux Bluetooth

Reviewed-by on v1 1/1
#2 lore raw
In reply to monesss315

Dear Gustavo,

Thank you for your patch. Just a note to add all listed MAINTAINERS entries to the receivers (scripts/get_maintainer.pl drivers/bluetooth/btusb.c).

Am 23.06.26 um 13:49 schrieb monesss315:

Quoted 7 lines

From: Gustavo Evgucci <[email protected]>

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not recognized as a MediaTek device because it is missing from the btusb device ID table. As a result, btmtk firmware loading is never triggered and the HCI reset command times out with -ETIMEDOUT.

Quoted 6 lines

Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags, consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630 entries which use the same chip.

Tested on: MediaTek MT7922 (Wi-Fi 6E combo card, IMC Networks BT USB interface), kernel 7.0.11-arch1-1.

It’s common to add the output of /sys/kernel/debug/usb/devices to the commit message, cf git log drivers/bluetooth/btusb.c.

Quoted 9 lines
Signed-off-by Gustavo Evgucci <[email protected]>
---
  drivers/bluetooth/btusb.c | 2 ++
  1 file changed, 2 insertions(+)

drivers/bluetooth/btusb.c static const struct usb_device_id btusb_table[] = { · line 762

Quoted 8 lines
drivers/bluetooth/btusb.c +2 -0
@@ -755,6 +755,8 @@ static const struct usb_device_id btusb_table[] = {
  						     BTUSB_WIDEBAND_SPEECH },
  	{ USB_DEVICE(0x13d3, 0x3613), .driver_info = BTUSB_MEDIATEK |
  						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3625), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
  	{ USB_DEVICE(0x13d3, 0x3627), .driver_info = BTUSB_MEDIATEK |
  						     BTUSB_WIDEBAND_SPEECH },
  	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |

Feel free to add:

Reviewed-by Paul Menzel <[email protected]>

Kind regards,

Paul

author
#3 lore raw

PATCH v2 1/1 Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922

In reply to monesss315

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not recognized as a MediaTek device because it is missing from the btusb device ID table. As a result, btmtk firmware loading is never triggered and the HCI reset command times out with -ETIMEDOUT.

Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags, consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630 entries which use the same chip.

Tested on: MediaTek MT7922 (Wi-Fi 6E combo card, IMC Networks BT USB interface), kernel 7.0.11-arch1-1.

/sys/kernel/debug/usb/devices:

T:  Bus=01 Lev=01 Prnt=01 Port=12 Cnt=03 Dev#=  4 Spd=480  MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3625 Rev= 1.00
S:  Manufacturer=MediaTek Inc.
S:  Product=Wireless_Device
S:  SerialNumber=000000000
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA
A:  FirstIf#= 0 IfCount= 3 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=125us
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS=  64 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS=  64 Ivl=125us
I:* If#= 2 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=8a(I) Atr=03(Int.) MxPS= 512 Ivl=125us
E:  Ad=0a(O) Atr=03(Int.) MxPS= 512 Ivl=125us
Signed-off-by Gustavo Evgucci <[email protected]>
Reviewed-by Paul Menzel <[email protected]>

---

Notes:
v2:
- Add /sys/kernel/debug/usb/devices output to the commit message (Paul Menzel)
- Add Reviewed-by: Paul Menzel
- Resend to all maintainers from scripts/get_maintainer.pl

 drivers/bluetooth/btusb.c | 2 ++
 1 file changed, 2 insertions(+)
drivers/bluetooth/btusb.c +2 -0
index 7f14ce9..f829203 100644
@@ -798,6 +798,8 @@ static const struct usb_device_id quirks_table[] = {
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3613), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
+	{ USB_DEVICE(0x13d3, 0x3625), .driver_info = BTUSB_MEDIATEK |
+						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3627), .driver_info = BTUSB_MEDIATEK |
 						     BTUSB_WIDEBAND_SPEECH },
 	{ USB_DEVICE(0x13d3, 0x3628), .driver_info = BTUSB_MEDIATEK |
Signature · 1 line
2.54.0
#4 lore raw

RE: [v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1116370

---Test result---

Test Summary:

CheckPatch                    PASS      1.08 seconds
VerifyFixes                   PASS      0.27 seconds
VerifySignedoff               PASS      0.21 seconds
GitLint                       FAIL      0.52 seconds
SubjectPrefix                 PASS      0.24 seconds
BuildKernel                   PASS      27.04 seconds
CheckAllWarning               PASS      29.69 seconds
CheckSparse                   PASS      29.46 seconds
BuildKernel32                 PASS      26.30 seconds
CheckKernelLLVM               SKIP      0.00 seconds
TestRunnerSetup               PASS      500.16 seconds
IncrementalBuild              PASS      25.76 seconds

Details
##############################
Test: GitLint - FAIL
Desc: Run gitlint
Output:
[v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922

63: B1 Line exceeds max length (82>80): " - Add /sys/kernel/debug/usb/devices output to the commit message (Paul Menzel)"
##############################
Test: CheckKernelLLVM - SKIP
Desc: Build kernel with LLVM + context analysis
Output:
Clang not found

https://github.com/bluez/bluetooth-next/pull/351

---
Regards,
Linux Bluetooth

CI Applied
#5 lore raw

Re: [PATCH v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922

In reply to Gustavo Evgucci
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 10 lines · On Thu, 25 Jun 2026 11:32:30 +0300 you wrote:

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not recognized as a MediaTek device because it is missing from the btusb device ID table. As a result, btmtk firmware loading is never triggered and the HCI reset command times out with -ETIMEDOUT.

Add the device with BTUSB_MEDIATEK | BTUSB_WIDEBAND_SPEECH flags, consistent with the neighboring 13d3:3627, 13d3:3628 and 13d3:3630 entries which use the same chip.

[...]

Here is the summary with links:
- [v2] Bluetooth: btusb: Add USB ID 13d3:3625 for MediaTek MT7922

    https://git.kernel.org/bluetooth/bluetooth-next/c/ddd25808d4c2

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
CI Applied
#6 lore raw
In reply to monesss315
This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master) by Luiz Augusto von Dentz <[email protected]>:

Quoted 8 lines · On Tue, 23 Jun 2026 14:49:37 +0300 you wrote:

From: Gustavo Evgucci <[email protected]>

The IMC Networks MT7922 Bluetooth adapter with USB ID 13d3:3625 is not recognized as a MediaTek device because it is missing from the btusb device ID table. As a result, btmtk firmware loading is never triggered and the HCI reset command times out with -ETIMEDOUT.

[...]

Here is the summary with links:
- Bluetooth: btusb: Add IMC Networks MT7922 device 0x13d3:0x3625

    https://git.kernel.org/bluetooth/bluetooth-next/c/ddd25808d4c2

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html