Skip to contentSkip to conversation

ipvlan: inherit needed_headroom and needed_tailroom from phy_dev

PATCH Applied Eric Dumazet 3 participants 3 messages Aug 6 – Aug 10

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 ipvlan: inherit needed_headroom and needed_tailroom from phy_dev

ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0.

When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space.

This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom.

Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

---
v2: also inherit needed_tailroom (Sashiko)
v1: https://lore.kernel.org/netdev/CANn89iLr4EQxBAKikZCeXbXEk-pjmT4mq3d=D2P01MtNSUgwrg@mail.gmail.com/T/#t

 drivers/net/ipvlan/ipvlan_main.c | 4 ++++
 1 file changed, 4 insertions(+)
drivers/net/ipvlan/ipvlan_main.c +4 -0
index ed46439a9f4eb1dd8bfaf6c83476ba4f2aff31bc..92d3d340281ffbc8e54a61e975484ab156c42c9b 100644
@@ -146,6 +146,8 @@ static int ipvlan_init(struct net_device *dev)
 	dev->lltx = true;
 	netif_inherit_tso_max(dev, phy_dev);
 	dev->hard_header_len = phy_dev->hard_header_len;
+	dev->needed_headroom = phy_dev->needed_headroom;
+	dev->needed_tailroom = phy_dev->needed_tailroom;
 
 	netdev_lockdep_set_classes(dev);
 
@@ -773,6 +775,8 @@ static int ipvlan_device_event(struct notifier_block *unused,
 	case NETDEV_FEAT_CHANGE:
 		list_for_each_entry(ipvlan, &port->ipvlans, pnode) {
 			netif_inherit_tso_max(ipvlan->dev, dev);
+			ipvlan->dev->needed_headroom = dev->needed_headroom;
+			ipvlan->dev->needed_tailroom = dev->needed_tailroom;
 			netdev_update_features(ipvlan->dev);
 		}
 		break;
Signature · 1 line
2.55.0.629.g250fe7f194-goog
Reviewed-by on v2 1/1
#1 lore raw
Quoted 55 lines · Eric Dumazet

ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0.

When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space.

This can result in reallocation overhead, skb headroom underflows, or KASAN slab-use-after-free crashes when dev_hard_header() / ipvlan_hard_header() prepends header data or when lower devices append tailroom.

Fix this by:
1. Inheriting needed_headroom and needed_tailroom from phy_dev in ipvlan_init().
2. Propagating needed_headroom and needed_tailroom updates to attached ipvlans in ipvlan_device_event() when receiving NETDEV_FEAT_CHANGE events.

---
v2: also inherit needed_tailroom (Sashiko)
v1: https://lore.kernel.org/netdev/CANn89iLr4EQxBAKikZCeXbXEk-pjmT4mq3d=D2P01MtNSUgwrg@mail.gmail.com/T/#t

drivers/net/ipvlan/ipvlan_main.c | 4 ++++

1 file changed, 4 insertions(+)
drivers/net/ipvlan/ipvlan_main.c +4 -0
index ed46439a9f4eb1dd8bfaf6c83476ba4f2aff31bc..92d3d340281ffbc8e54a61e975484ab156c42c9b 100644
@@ -146,6 +146,8 @@ static int ipvlan_init(struct net_device *dev)
 	dev->lltx = true;
 	netif_inherit_tso_max(dev, phy_dev);
 	dev->hard_header_len = phy_dev->hard_header_len;
+	dev->needed_headroom = phy_dev->needed_headroom;
+	dev->needed_tailroom = phy_dev->needed_tailroom;
 
 	netdev_lockdep_set_classes(dev);
 
@@ -773,6 +775,8 @@ static int ipvlan_device_event(struct notifier_block *unused,
 	case NETDEV_FEAT_CHANGE:
 		list_for_each_entry(ipvlan, &port->ipvlans, pnode) {
 			netif_inherit_tso_max(ipvlan->dev, dev);
+			ipvlan->dev->needed_headroom = dev->needed_headroom;
+			ipvlan->dev->needed_tailroom = dev->needed_tailroom;
 			netdev_update_features(ipvlan->dev);
 		}
 		break;
Signature · 1 line
2.55.0.629.g250fe7f194-goog
#2 lore raw
In reply to Eric Dumazet
This patch was applied to netdev/net.git (main) by Jakub Kicinski <[email protected]>:

Hello:

This patch was applied to netdev/net.git (main)
by Jakub Kicinski <[email protected]>:

Quoted 9 lines · On Thu, 6 Aug 2026 10:38:57 +0000 you wrote:

ipvlan devices inherit hard_header_len from phy_dev during ipvlan_init(), but leave needed_headroom and needed_tailroom set to 0.

When the underlying phy_dev (or stacked lower device) requires extra headroom or tailroom for headers/trailers (e.g. macsec, ipsec, wireguard, tunnels, or veth with rx headroom), upper layers calculating packet headroom and tailroom fail to reserve sufficient space.

[...]

Here is the summary with links:
- [v2,net] ipvlan: inherit needed_headroom and needed_tailroom from phy_dev

    https://git.kernel.org/netdev/net/c/e16e960d55a4

You are awesome, thank you!

Signature · 2 lines
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html