Skip to contentSkip to conversation

dt-bindings: power: Convert TI SmartReflex to DT schema

PATCH Applied Eduard Bostina 2 participants 2 messages Aug 10 – Aug 11 Device tree bindings

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 dt-bindings: power: Convert TI SmartReflex to DT schema

Convert the Texas Instruments SmartReflex bindings to DT schema.

---
Changes in v2:
- Dropped the '|' block scalar from the description.
- Marked 'ti,hwmods' as deprecated.
- Reduced the examples down to a single one.

Link to v1:
https://lore.kernel.org/all/[email protected]/

 .../bindings/power/ti,smartreflex.yaml        | 50 +++++++++++++++++++
 .../bindings/power/ti-smartreflex.txt         | 47 -----------------
 2 files changed, 50 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/ti,smartreflex.yaml
 delete mode 100644 Documentation/devicetree/bindings/power/ti-smartreflex.txt
Documentation/devicetree/bindings/power/ti,smartreflex.yaml new file +50 -0
new file mode 100644
index 000000000000..7ca0a5eed9b2
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/ti,smartreflex.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments SmartReflex
+
+maintainers:
+  - Eduard Bostina <[email protected]>
+
+description:
+  SmartReflex is used to set and adjust the SoC operating points.
+
+properties:
+  compatible:
+    enum:
+      - ti,omap3-smartreflex-core
+      - ti,omap3-smartreflex-mpu-iva
+      - ti,omap4-smartreflex-core
+      - ti,omap4-smartreflex-mpu
+      - ti,omap4-smartreflex-iva
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  ti,hwmods:
+    description: Shall contain the TI interconnect module name if needed by the SoC
+    $ref: /schemas/types.yaml#/definitions/string
+    deprecated: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    smartreflex@4a0db000 {
+        compatible = "ti,omap4-smartreflex-iva";
+        reg = <0x4a0db000 0x80>;
+        interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+    };
Documentation/devicetree/bindings/power/ti-smartreflex.txt deleted +0 -47

47 lines not on this page · raw message

Signature · 1 line
2.43.0
maintainer Applied
#1 lore raw
Quoted 9 lines · Eduard Bostina

Convert the Texas Instruments SmartReflex bindings to DT schema.

---
Changes in v2:
- Dropped the '|' block scalar from the description.
- Marked 'ti,hwmods' as deprecated.
- Reduced the examples down to a single one.

Quoted 9 lines

Link to v1:
https://lore.kernel.org/all/[email protected]/

 .../bindings/power/ti,smartreflex.yaml        | 50 +++++++++++++++++++
 .../bindings/power/ti-smartreflex.txt         | 47 -----------------
 2 files changed, 50 insertions(+), 47 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/power/ti,smartreflex.yaml
 delete mode 100644 Documentation/devicetree/bindings/power/ti-smartreflex.txt

Applied, thanks!