doc/qualification: Add ASCS PICS file
PATCH 1/2 doc/qualification: Add ASCS PICS file
--- doc/qualification/ascs-pics.rst | 203 ++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 doc/qualification/ascs-pics.rst
doc/qualification/ascs-pics.rst new file +203 -0
@@ -0,0 +1,203 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later +.. Copyright © 2026 Collabora Ltd. + +============================ +Audio Stream Control Service +============================ +(TCRL pkg103, ASCS.ICS.p5) + +Versions +======== + +**Table 0: X.Y Versions** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_0_1 | x | ASCS v1.0 (M) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory + +**Table 1: X.Y.Z Versions** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_1_1 | | ASCS v1.0.1 (O) | ++------------------+----------+----------------------------------------------+ + +- O: Optional + +Transports +========== + +**Table 2: Transport Requirements** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_2_1 | | Service supported over BR/EDR (C.1, C.3) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_2_2 | x | Service supported over LE (C.2, C.3) | ++------------------+----------+----------------------------------------------+ + +- C.1: Excluded for this Service IF CORE 41/2 "LE Core Configuration" OR CORE + 40/1 "Core-Controller". +- C.2: Excluded for this Service IF CORE 41/1 "BR/EDR Core Configuration" OR + CORE 40/1 "Core-Controller". +- C.3: Mandatory to support at least one. + +Features +======== + +**Table 3: Included Services** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_3_1 | x | Published Audio Capabilities Service (M) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory + +**Table 4: Features** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_4_1 | | Support Multiple ASEs (O) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_4_2 | | Support Multiple Sink ASEs (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_4_3 | | Support Multiple Source ASEs (C.2) | ++------------------+----------+----------------------------------------------+ + +- O: Optional +- C.1: Optional IF ASCS 4/1 "Support Multiple ASEs" AND ASCS 5/1 "Sink ASE + characteristic", otherwise Excluded. +- C.2: Optional IF ASCS 4/1 "Support Multiple ASEs" AND ASCS 5/2 "Source ASE + characteristic", otherwise Excluded. + +**Table 5: Included Characteristics** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_5_1 | x | Sink ASE characteristic (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_5_2 | x | Source ASE characteristic (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_5_3 | x | ASE Control Point characteristic (M) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory +- C.1: Mandatory to support at least one. + +**Table 6: ASE Control Operations** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_6_1 | x | Config Codec (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_2 | x | Config QoS (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_3 | x | Enable (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_4 | x | Receiver Start Ready (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_5 | x | Disable (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_6 | x | Receiver Stop Ready (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_7 | x | Update Metadata (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_8 | x | Release (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_6_9 | x | Released (M) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory +- C.1: Mandatory IF ASCS 5/2 "Source ASE characteristic", otherwise Excluded. + +**Table 7: Server-Initiated ASE Control Operations** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_7_1 | | Autonomous Config Codec (O) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_7_2 | x | Autonomous Receiver Start Ready (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_7_3 | | Autonomous Disable (O) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_7_4 | | Autonomous Update Metadata (O) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_7_5 | | Autonomous Release (O) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory +- O: Optional + +**Table 8: ASE State Transitions** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_8_1 | x | Released transition to Codec Configured state| +| | | (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_8_2 | x | Released transition to Idle state (C.1) | ++------------------+----------+----------------------------------------------+ + +- C.1: Mandatory to support at least one. + +GATT requirements +================= + +**Table 9: GATT Requirements** + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_9_1 | x | Write Without Response (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_2 | x | Write Characteristic Value (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_3 | x | Write Long Characteristic Value (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_4 | x | Single Notification (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_5 | x | Read Characteristic Descriptor (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_6 | x | Write Characteristic Descriptor (M) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_7 | | Enhanced ATT bearer (BR/EDR or LE) (O) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_8 | | GATT Server over BR/EDR (C.1) | ++------------------+----------+----------------------------------------------+ +| TSPC_ASCS_9_9 | x | GATT Server over LE (C.2) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory +- O: Optional +- C.1: Mandatory IF ASCS 2/1 "Service supported over BR/EDR", otherwise not + defined. +- C.2: Mandatory IF ASCS 2/2 "Service supported over LE", otherwise not + defined. + +SDP requirements +================ + +**Table 10: SDP Requirements** + +Prerequisite: ASCS 2/1 "Service supported over BR/EDR" + ++------------------+----------+----------------------------------------------+ +| Parameter Name | Selected | Description | ++==================+==========+==============================================+ +| TSPC_ASCS_10_1 | | SDP record present for ASCS (M) | ++------------------+----------+----------------------------------------------+ + +- M: Mandatory
Signature · 1 line
2.43.0
PATCH 2/2 doc/qualification: add ASCS PTS tests documentation
From: raghavendra <[email protected]>
--- doc/qualification/ascs-pts.rst | 1262 ++++++++++++++++++++++++++++++++ 1 file changed, 1262 insertions(+) create mode 100644 doc/qualification/ascs-pts.rst
doc/qualification/ascs-pts.rst new file +1262 -0
@@ -0,0 +1,1262 @@ +.. SPDX-License-Identifier: GPL-2.0-or-later +.. Copyright © 2026 Collabora Ltd. + +================= +ASCS test results +================= + +:PTS version: 8.12.0 Build 5 + +Setup +===== + +- Remove PTS device from Bluetooth devices + +Tests +===== + +The kernel and BlueZ versions represent the oldest version without backport +for which we know the test passed. + ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| Test name | Result | Kernel | BlueZ | | ++==============================+==========+========+=======+=========================================================================+ +| ASCS/SR/ACP/BV-01-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-02-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-03-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-04-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-05-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-06-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-08-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-09-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-10-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-11-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-12-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-13-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-14-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-17-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-18-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-19-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-20-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/ACP/BV-31-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force BlueZ to perform security repairing in | +| | | | | '/path/to/bluetooth/main.conf':: | +| | | | | | +| | | | | JustWorksRepairing = always | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart bluetoothd, PipeWire and WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Reset BlueZ to previous configuration: | +| | | | | | +| | | | | - Set 'JustWorksRepairing' to default in | +| | | | | '/path/to/bluetooth/main.conf' | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SGGIT/CHA/BV-01-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SGGIT/CHA/BV-02-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SGGIT/CHA/BV-03-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SGGIT/SER/BV-01-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-01-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-02-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-03-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-04-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-05-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-06-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-07-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-08-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-09-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-10-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-11-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-12-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-13-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-14-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-17-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-18-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-19-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| ASCS/SR/SPE/BI-20-C | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+ +| IOPT/ASCS/SR/GATTDB/BV-01-I | PASS | 6.14 | 5.87 | Pre-condition: | +| | | | | | +| | | | | - Force PTS to perform pairing: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'TRUE' in IXIT Tool window of PTS | +| | | | | | +| | | | | - Remove PTS device: | +| | | | | | +| | | | | - bluetoothctl remove <pts_addr> | +| | | | | | +| | | | | - Add rule to force Targeted Announcement in 'monitor.bluez.rules' of | +| | | | | 'wireplumber.conf.d/announcement.conf':: | +| | | | | | +| | | | | monitor.bluez.properties = { | +| | | | | bluez5.bap-server.ascs-announcement = "targeted" | +| | | | | } | +| | | | | | +| | | | | - Restart PipeWire And WirePlumber | +| | | | +-------------------------------------------------------------------------+ +| | | | | Run 'bluetoothctl'. | +| | | | | | +| | | | | On demand accept the pairing request. | +| | | | +-------------------------------------------------------------------------+ +| | | | | Post-condition: | +| | | | | | +| | | | | - Reset PTS to previous configuration: | +| | | | | | +| | | | | - Set 'TSPX_delete_ltk' to 'FALSE' in IXIT Tool window of PTS | +| | | | | | ++------------------------------+----------+--------+-------+-------------------------------------------------------------------------+
Signature · 1 line
2.43.0
This is automated email and please do not reply to this email!
Dear submitter,
Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=1156754
---Test result---
Test Summary:
CheckPatch PASS 1.10 seconds GitLint PASS 0.43 seconds BuildEll PASS 20.51 seconds BluezMake PASS 619.69 seconds MakeCheck PASS 18.92 seconds MakeDistcheck PASS 161.07 seconds CheckValgrind PASS 233.78 seconds CheckSmatch PASS 316.26 seconds bluezmakeextell PASS 103.30 seconds IncrementalBuild PASS 609.88 seconds ScanBuild PASS 1004.99 seconds
https://github.com/bluez/bluez/pull/2476
---
Regards,
Linux Bluetooth
This is an automated email and please do not reply to this email.
Dear Submitter,
This series was picked up by the CI more than 2 weeks ago and the pull request created for it is still open, which means the series was never applied to the tree.
Series: [BlueZ,1/2] doc/qualification: Add ASCS PICS file
Pull Request: https://github.com/bluez/bluez/pull/2476
Created: 2026-09-03 11:12:53+00:00
The pull request has been closed and no further action is taken on this series.
If the change should still be considered, it must be resent to the Linux Bluetooth mailing list ([email protected]) so that it is picked up again.
---
Regards,
Linux Bluetooth
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Hello:
This series was applied to bluetooth/bluez.git (master) by Luiz Augusto von Dentz <[email protected]>:
Quoted 4 lines · On Thu, 3 Sep 2026 09:29:47 +0200 you wrote:
--- doc/qualification/ascs-pics.rst | 203 ++++++++++++++++++++++++++++++++ 1 file changed, 203 insertions(+) create mode 100644 doc/qualification/ascs-pics.rst
Here is the summary with links:
- [BlueZ,1/2] doc/qualification: Add ASCS PICS file
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=12fc9c791485 - [BlueZ,2/2] doc/qualification: add ASCS PTS tests documentation https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=92f13ea19b67
You are awesome, thank you!
Signature · 2 lines
Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html