event: Correct dependencies on the EVENT framework
Subsystems (6)
PATCH 1/1 event: Correct dependencies on the EVENT framework
The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to DM_EVENT and EVENT_DYNAMIC. Only EVENT_DEBUG and CMD_EVENT should be visible to the user to select, when EVENT is selected.
With this, it's time to address the larger problems. When functionality uses events, typically via EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users of EVENT_SPY to have a more fine-grained approach to select'ing the framework where used. Audit the current users of event_register and also select EVENT_DYNAMIC.
---
Changes in v2:
- Collect tags
- Reword the commit message a little, reword and comment on the EFI_LOADER case.
- Add the rest of the VBE cases I had forgotten.
--- arch/Kconfig | 6 +++--- arch/arm/Kconfig | 9 ++++----- arch/arm/mach-omap2/Kconfig | 3 +++ arch/mips/Kconfig | 2 +- arch/powerpc/cpu/mpc85xx/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/cpu/baytrail/Kconfig | 1 + arch/x86/cpu/broadwell/Kconfig | 1 + arch/x86/cpu/ivybridge/Kconfig | 1 + arch/x86/cpu/quark/Kconfig | 1 + board/google/Kconfig | 1 + board/keymile/Kconfig | 1 + boot/Kconfig | 3 +++ cmd/Kconfig | 1 + common/Kconfig | 17 ++++++++--------- drivers/core/Kconfig | 9 +++++---- drivers/cpu/Kconfig | 1 - lib/efi_loader/Kconfig | 6 +++--- 18 files changed, 39 insertions(+), 26 deletions(-)
arch/Kconfig +3 -3
@@ -93,7 +93,7 @@ config NIOS2 bool "Nios II architecture" select CPU select DM - imply DM_EVENT + select DM_EVENT select OF_CONTROL select SUPPORT_OF_CONTROL imply CMD_DM
@@ -111,9 +111,9 @@ config RISCV select SUPPORT_OF_CONTROL select OF_CONTROL select DM + select DM_EVENT imply SPL_SEPARATE_BSS if SPL imply DM_SERIAL - imply DM_EVENT imply DM_MMC imply DM_SPI imply DM_SPI_FLASH
@@ -136,6 +136,7 @@ config SANDBOX select BZIP2 select CMD_POWEROFF select DM + select DM_EVENT select DM_FUZZING_ENGINE select DM_GPIO select DM_I2C
@@ -240,7 +241,6 @@ config X86 imply CMD_SF imply CMD_SF_TEST imply CMD_ZBOOT - imply DM_EVENT imply DM_GPIO imply DM_KEYBOARD imply DM_MMC
arch/arm/Kconfig +4 -5
@@ -778,7 +778,6 @@ config ARCH_OMAP2PLUS select SUPPORT_SPL imply TI_SYSC if DM && OF_CONTROL imply FIT - imply DM_EVENT imply SPL_SEPARATE_BSS config ARCH_MESON
@@ -823,11 +822,11 @@ config ARCH_IMX8 select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select DM + select DM_EVENT select GPIO_EXTRA_HEADER select MACH_IMX select OF_CONTROL select ENABLE_ARM_SOC_BOOT0_HOOK - imply DM_EVENT config ARCH_IMX8M bool "NXP i.MX8M platform"
@@ -839,14 +838,15 @@ config ARCH_IMX8M select SYS_FSL_SEC_LE select SYS_I2C_MXC select DM + select DM_EVENT if CLK select SUPPORT_SPL imply CMD_DM - imply DM_EVENT config ARCH_IMX8ULP bool "NXP i.MX8ULP platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select OF_CONTROL select SUPPORT_SPL
@@ -854,19 +854,18 @@ config ARCH_IMX8ULP select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMX9 bool "NXP i.MX9 platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select SUPPORT_SPL select GPIO_EXTRA_HEADER select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMXRT bool "NXP i.MXRT platform"
arch/arm/mach-omap2/Kconfig +3 -0
@@ -31,6 +31,7 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" + select DM_EVENT select SPL_USE_TINY_PRINTF select SPL_SYS_NO_VECTOR_TABLE if SPL imply NAND_OMAP_ELM
@@ -55,6 +56,7 @@ config OMAP54XX bool "OMAP54XX SoC" select ARM_CORTEX_A15_CVE_2017_5715 select ARM_ERRATA_798870 + select DM_EVENT select SYS_THUMB_BUILD imply NAND_OMAP_ELM imply NAND_OMAP_GPMC
@@ -111,6 +113,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" select ARM_CORTEX_A8_CVE_2017_5715 + select DM_EVENT select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMC
arch/mips/Kconfig +1 -1
@@ -121,6 +121,7 @@ config MACH_PIC32 bool "Support Microchip PIC32" select HAS_FIXED_TIMER_FREQUENCY select DM + select DM_EVENT select OF_CONTROL imply CMD_DM
@@ -128,7 +129,6 @@ config TARGET_BOSTON bool "Support Boston" select HAS_FIXED_TIMER_FREQUENCY select DM - imply DM_EVENT select DM_SERIAL select MIPS_CM select SYS_CACHE_SHIFT_6
arch/powerpc/cpu/mpc85xx/Kconfig +1 -0
@@ -248,6 +248,7 @@ config TARGET_KMP204X config TARGET_KMCENT2 bool "Support kmcent2" select VENDOR_KM + select EVENT select FSL_CORENET select SYS_DPAA_FMAN select SYS_DPAA_PME
arch/x86/Kconfig +1 -0
@@ -395,6 +395,7 @@ config FSP_VERSION1 config FSP_VERSION2 bool "FSP version 2.x" + select DM_EVENT help This covers versions 2.0 and 2.1. See here for details: https://github.com/IntelFsp/fsp/wiki
arch/x86/cpu/baytrail/Kconfig +1 -0
@@ -7,6 +7,7 @@ config INTEL_BAYTRAIL select HAVE_FSP select ARCH_MISC_INIT select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCI
arch/x86/cpu/broadwell/Kconfig +1 -0
@@ -6,6 +6,7 @@ config INTEL_BROADWELL bool select CACHE_MRC_BIN + select DM_EVENT select ARCH_EARLY_INIT_R imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE
arch/x86/cpu/ivybridge/Kconfig +1 -0
@@ -8,6 +8,7 @@ config NORTHBRIDGE_INTEL_IVYBRIDGE bool select CACHE_MRC_BIN if HAVE_MRC + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCI
arch/x86/cpu/quark/Kconfig +1 -0
@@ -7,6 +7,7 @@ config INTEL_QUARK select HAVE_RMU select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select DM_EVENT imply ENABLE_MRC_CACHE imply ETH_DESIGNWARE imply ICH_SPI
board/google/Kconfig +1 -0
@@ -18,6 +18,7 @@ choice config TARGET_CHROMEBOOK_CORAL bool "Chromebook coral" select BIOSEMU + select EVENT help This is a range of Intel-based laptops released in 2018. They use an Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB of
board/keymile/Kconfig +1 -0
@@ -124,6 +124,7 @@ config SYS_IVM_EEPROM_PAGE_LEN config PG_WCOM_UBOOT_UPDATE_SUPPORTED bool "Enable U-boot Field Fail-Safe Update Functionality" + select EVENT default n help Indicates that field fail-safe u-boot update is supported.
boot/Kconfig +3 -0
@@ -474,6 +474,7 @@ config BOOTMETH_VBE depends on FIT default y select BOOTMETH_GLOBAL + select EVENT help Enables support for VBE boot. This is a standard boot method which supports selection of various firmware components, seleciton of an OS to
@@ -482,6 +483,7 @@ config BOOTMETH_VBE config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" depends on SPL && FIT + select EVENT default y if VPL help Enables support for VBE boot. This is a standard boot method which
@@ -491,6 +493,7 @@ config SPL_BOOTMETH_VBE config VPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (VPL)" depends on VPL && FIT + select EVENT default y help Enables support for VBE boot. This is a standard boot method which
cmd/Kconfig +1 -0
@@ -2622,6 +2622,7 @@ config CMD_DIAG config CMD_EVENT bool "event - Show information about events" + depends on EVENT default y if EVENT_DEBUG help This enables the 'event' command which provides information about
common/Kconfig +8 -9
@@ -604,24 +604,23 @@ config CYCLIC_MAX_CPU_TIME_US endif # CYCLIC config EVENT - bool "General-purpose event-handling mechanism" - default y if SANDBOX + bool help - This enables sending and processing of events, to allow interested - parties to be alerted when something happens. This is an attempt to - stem the flow of weak functions, hooks, functions in board_f.c - and board_r.c and the Kconfig options below. + This adds a framework for general purpose sending and processing of + events, to allow interested parties to be alerted when something + happens. This is an attempt to stem the flow of weak functions, + hooks, functions in board_f.c and board_r.c and the Kconfig options + below. See doc/develop/event.rst for more information. if EVENT config EVENT_DYNAMIC - bool "Support event registration at runtime" - default y if SANDBOX + bool help Enable this to support adding an event spy at runtime, without adding - it to the EVENT_SPy() linker list. This increases code size slightly + it to the EVENT_SPY() linker list. This increases code size slightly but provides more flexibility for boards and subsystems that need it. config EVENT_DEBUG
drivers/core/Kconfig +5 -4
@@ -109,13 +109,14 @@ config DM_DEVICE_REMOVE causes USB host controllers to not be stopped when booting the OS. config DM_EVENT - bool "Support events with driver model" - depends on DM && EVENT - default y if SANDBOX + bool + depends on DM + select EVENT help This enables support for generating events related to driver model operations, such as prbing or removing a device. Subsystems can - register a 'spy' function that is called when the event occurs. + register a 'spy' function that is called when the event occurs. Such + subsystems must select this option. config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL"
drivers/cpu/Kconfig +0 -1
@@ -23,7 +23,6 @@ config CPU_RISCV config CPU_MICROBLAZE bool "Enable Microblaze CPU driver" depends on CPU && MICROBLAZE - select EVENT select DM_EVENT select XILINX_MICROBLAZE0_PVR help
lib/efi_loader/Kconfig +3 -3
@@ -14,9 +14,9 @@ config EFI_LOADER depends on !EFI_APP default y if !ARM || SYS_CPU = armv7 || SYS_CPU = armv8 select CHARSET - select DM_EVENT - select EVENT - select EVENT_DYNAMIC + # We need to send DM events, dynamically, in the EFI block driver + select DM_EVENT if PARTITIONS + select EVENT_DYNAMIC if PARTITIONS select LIB_UUID imply PARTITION_UUIDS select REGEX
Signature · 1 line
2.25.1
Quoted 417 lines · Tom Rini
The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to
DM_EVENTandEVENT_DYNAMIC. OnlyEVENT_DEBUGandCMD_EVENTshould be visible to the user to select, when EVENT is selected.With this, it's time to address the larger problems. When functionality uses events, typically via
EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users ofEVENT_SPYto have a more fine-grained approach to select'ing the framework where used. Audit the current users ofevent_registerand also selectEVENT_DYNAMIC.Cc AKASHI Takahiro <[email protected]>Cc Heinrich Schuchardt <[email protected]>Reported-by Oliver Graute <[email protected]>Reported-by Francesco Dolcini <[email protected]>Fixes 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")Fixes 42fdcebf859f ("event: Convert misc_init_f() to use events")Fixes c5ef2025579e ("dm: fix DM_EVENT dependencies")Signed-off-by Tom Rini <[email protected]>Tested-by Simon Glass <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Fabio Estevam <[email protected]>---
Changes in v2:
- Collect tags
- Reword the commit message a little, reword and comment on theEFI_LOADERcase.
- Add the rest of the VBE cases I had forgotten.--- arch/Kconfig | 6 +++--- arch/arm/Kconfig | 9 ++++----- arch/arm/mach-omap2/Kconfig | 3 +++ arch/mips/Kconfig | 2 +- arch/powerpc/cpu/mpc85xx/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/cpu/baytrail/Kconfig | 1 + arch/x86/cpu/broadwell/Kconfig | 1 + arch/x86/cpu/ivybridge/Kconfig | 1 + arch/x86/cpu/quark/Kconfig | 1 + board/google/Kconfig | 1 + board/keymile/Kconfig | 1 + boot/Kconfig | 3 +++ cmd/Kconfig | 1 + common/Kconfig | 17 ++++++++--------- drivers/core/Kconfig | 9 +++++---- drivers/cpu/Kconfig | 1 - lib/efi_loader/Kconfig | 6 +++--- 18 files changed, 39 insertions(+), 26 deletions(-)arch/Kconfig +3
-3@@ -93,7 +93,7 @@ config NIOS2 bool "Nios II architecture" select CPU select DM - imply DM_EVENT + select DM_EVENT select OF_CONTROL select SUPPORT_OF_CONTROL imply CMD_DM@@ -111,9 +111,9 @@ config RISCV select SUPPORT_OF_CONTROL select OF_CONTROL select DM + select DM_EVENT imply SPL_SEPARATE_BSS if SPL imply DM_SERIAL - imply DM_EVENT imply DM_MMC imply DM_SPI imply DM_SPI_FLASH@@ -136,6 +136,7 @@ config SANDBOX select BZIP2 select CMD_POWEROFF select DM + select DM_EVENT select DM_FUZZING_ENGINE select DM_GPIO select DM_I2C@@ -240,7 +241,6 @@ config X86 imply CMD_SF imply CMD_SF_TEST imply CMD_ZBOOT - imply DM_EVENT imply DM_GPIO imply DM_KEYBOARD imply DM_MMCarch/arm/Kconfig +4
-5@@ -778,7 +778,6 @@ config ARCH_OMAP2PLUS select SUPPORT_SPL imply TI_SYSC if DM && OF_CONTROL imply FIT - imply DM_EVENT imply SPL_SEPARATE_BSS config ARCH_MESON@@ -823,11 +822,11 @@ config ARCH_IMX8 select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select DM + select DM_EVENT select GPIO_EXTRA_HEADER select MACH_IMX select OF_CONTROL select ENABLE_ARM_SOC_BOOT0_HOOK - imply DM_EVENT config ARCH_IMX8M bool "NXP i.MX8M platform"@@ -839,14 +838,15 @@ config ARCH_IMX8M select SYS_FSL_SEC_LE select SYS_I2C_MXC select DM + select DM_EVENT if CLK select SUPPORT_SPL imply CMD_DM - imply DM_EVENT config ARCH_IMX8ULP bool "NXP i.MX8ULP platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select OF_CONTROL select SUPPORT_SPL@@ -854,19 +854,18 @@ config ARCH_IMX8ULP select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMX9 bool "NXP i.MX9 platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select SUPPORT_SPL select GPIO_EXTRA_HEADER select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMXRT bool "NXP i.MXRT platform"arch/arm/mach-omap2/Kconfig +3
-0@@ -31,6 +31,7 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" + select DM_EVENT select SPL_USE_TINY_PRINTF select SPL_SYS_NO_VECTOR_TABLE if SPL imply NAND_OMAP_ELM@@ -55,6 +56,7 @@ config OMAP54XX bool "OMAP54XX SoC" select ARM_CORTEX_A15_CVE_2017_5715 select ARM_ERRATA_798870 + select DM_EVENT select SYS_THUMB_BUILD imply NAND_OMAP_ELM imply NAND_OMAP_GPMC@@ -111,6 +113,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" select ARM_CORTEX_A8_CVE_2017_5715 + select DM_EVENT select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMCarch/mips/Kconfig +1
-1@@ -121,6 +121,7 @@ config MACH_PIC32 bool "Support Microchip PIC32" select HAS_FIXED_TIMER_FREQUENCY select DM + select DM_EVENT select OF_CONTROL imply CMD_DM@@ -128,7 +129,6 @@ config TARGET_BOSTON bool "Support Boston" select HAS_FIXED_TIMER_FREQUENCY select DM - imply DM_EVENT select DM_SERIAL select MIPS_CM select SYS_CACHE_SHIFT_6arch/powerpc/cpu/mpc85xx/Kconfig +1
-0@@ -248,6 +248,7 @@ config TARGET_KMP204X config TARGET_KMCENT2 bool "Support kmcent2" select VENDOR_KM + select EVENT select FSL_CORENET select SYS_DPAA_FMAN select SYS_DPAA_PMEarch/x86/Kconfig +1
-0@@ -395,6 +395,7 @@ config FSP_VERSION1 config FSP_VERSION2 bool "FSP version 2.x" + select DM_EVENT help This covers versions 2.0 and 2.1. See here for details: https://github.com/IntelFsp/fsp/wikiarch/x86/cpu/baytrail/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_BAYTRAIL select HAVE_FSP select ARCH_MISC_INIT select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/broadwell/Kconfig +1
-0@@ -6,6 +6,7 @@ config INTEL_BROADWELL bool select CACHE_MRC_BIN + select DM_EVENT select ARCH_EARLY_INIT_R imply HAVE_INTEL_ME imply ENABLE_MRC_CACHEarch/x86/cpu/ivybridge/Kconfig +1
-0@@ -8,6 +8,7 @@ config NORTHBRIDGE_INTEL_IVYBRIDGE bool select CACHE_MRC_BIN if HAVE_MRC + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/quark/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_QUARK select HAVE_RMU select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select DM_EVENT imply ENABLE_MRC_CACHE imply ETH_DESIGNWARE imply ICH_SPIboard/google/Kconfig +1
-0@@ -18,6 +18,7 @@ choice config TARGET_CHROMEBOOK_CORAL bool "Chromebook coral" select BIOSEMU + select EVENT help This is a range of Intel-based laptops released in 2018. They use an Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB ofboard/keymile/Kconfig +1
-0@@ -124,6 +124,7 @@ config SYS_IVM_EEPROM_PAGE_LEN config PG_WCOM_UBOOT_UPDATE_SUPPORTED bool "Enable U-boot Field Fail-Safe Update Functionality" + select EVENT default n help Indicates that field fail-safe u-boot update is supported.boot/Kconfig +3
-0@@ -474,6 +474,7 @@ config BOOTMETH_VBE depends on FIT default y select BOOTMETH_GLOBAL + select EVENT help Enables support for VBE boot. This is a standard boot method which supports selection of various firmware components, seleciton of an OS to@@ -482,6 +483,7 @@ config BOOTMETH_VBE config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" depends on SPL && FIT + select EVENT default y if VPL help Enables support for VBE boot. This is a standard boot method which@@ -491,6 +493,7 @@ config SPL_BOOTMETH_VBE config VPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (VPL)" depends on VPL && FIT + select EVENT default y help Enables support for VBE boot. This is a standard boot method whichcmd/Kconfig +1
-0@@ -2622,6 +2622,7 @@ config CMD_DIAG config CMD_EVENT bool "event - Show information about events" + depends on EVENT default y if EVENT_DEBUG help This enables the 'event' command which provides information aboutcommon/Kconfig +8
-9@@ -604,24 +604,23 @@ config CYCLIC_MAX_CPU_TIME_US endif # CYCLIC config EVENT - bool "General-purpose event-handling mechanism" - default y if SANDBOX + bool help - This enables sending and processing of events, to allow interested - parties to be alerted when something happens. This is an attempt to - stem the flow of weak functions, hooks, functions in board_f.c - and board_r.c and the Kconfig options below. + This adds a framework for general purpose sending and processing of + events, to allow interested parties to be alerted when something + happens. This is an attempt to stem the flow of weak functions, + hooks, functions in board_f.c and board_r.c and the Kconfig options + below. See doc/develop/event.rst for more information. if EVENT config EVENT_DYNAMIC - bool "Support event registration at runtime" - default y if SANDBOX + bool help Enable this to support adding an event spy at runtime, without adding - it to the EVENT_SPy() linker list. This increases code size slightly + it to the EVENT_SPY() linker list. This increases code size slightly but provides more flexibility for boards and subsystems that need it. config EVENT_DEBUGdrivers/core/Kconfig +5
-4@@ -109,13 +109,14 @@ config DM_DEVICE_REMOVE causes USB host controllers to not be stopped when booting the OS. config DM_EVENT - bool "Support events with driver model" - depends on DM && EVENT - default y if SANDBOX + bool + depends on DM + select EVENT help This enables support for generating events related to driver model operations, such as prbing or removing a device. Subsystems can - register a 'spy' function that is called when the event occurs. + register a 'spy' function that is called when the event occurs. Such + subsystems must select this option. config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL"drivers/cpu/Kconfig +0
-1@@ -23,7 +23,6 @@ config CPU_RISCV config CPU_MICROBLAZE bool "Enable Microblaze CPU driver" depends on CPU && MICROBLAZE - select EVENT select DM_EVENT select XILINX_MICROBLAZE0_PVR helplib/efi_loader/Kconfig +0
-0
lib/efi_loader/Kconfig config EFI_LOADER · line 19
Quoted 9 lines
lib/efi_loader/Kconfig +3
-3@@ -14,9 +14,9 @@ config EFI_LOADER depends on !EFI_APP default y if !ARM || SYS_CPU = armv7 || SYS_CPU = armv8 select CHARSET - select DM_EVENT - select EVENT - select EVENT_DYNAMIC + # We need to send DM events, dynamically, in the EFI block driver + select DM_EVENT if PARTITIONS + select EVENT_DYNAMIC if PARTITIONS
lib/efi_driver/efi_block_device.o is not related to partitions but to block devices.
These 'if's don't make sense.
Best regards
Heinrich
Quoted 3 lines
lib/efi_loader/Kconfig +0
-0select LIB_UUID imply PARTITION_UUIDS select REGEX
Quoted 431 lines · Heinrich Schuchardt
Quoted 417 lines · Tom Rini
The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to
DM_EVENTandEVENT_DYNAMIC. OnlyEVENT_DEBUGandCMD_EVENTshould be visible to the user to select, when EVENT is selected.With this, it's time to address the larger problems. When functionality uses events, typically via
EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users ofEVENT_SPYto have a more fine-grained approach to select'ing the framework where used. Audit the current users ofevent_registerand also selectEVENT_DYNAMIC.Cc AKASHI Takahiro <[email protected]>Cc Heinrich Schuchardt <[email protected]>Reported-by Oliver Graute <[email protected]>Reported-by Francesco Dolcini <[email protected]>Fixes 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")Fixes 42fdcebf859f ("event: Convert misc_init_f() to use events")Fixes c5ef2025579e ("dm: fix DM_EVENT dependencies")Signed-off-by Tom Rini <[email protected]>Tested-by Simon Glass <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Fabio Estevam <[email protected]>---
Changes in v2:
- Collect tags
- Reword the commit message a little, reword and comment on theEFI_LOADERcase.
- Add the rest of the VBE cases I had forgotten.--- arch/Kconfig | 6 +++--- arch/arm/Kconfig | 9 ++++----- arch/arm/mach-omap2/Kconfig | 3 +++ arch/mips/Kconfig | 2 +- arch/powerpc/cpu/mpc85xx/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/cpu/baytrail/Kconfig | 1 + arch/x86/cpu/broadwell/Kconfig | 1 + arch/x86/cpu/ivybridge/Kconfig | 1 + arch/x86/cpu/quark/Kconfig | 1 + board/google/Kconfig | 1 + board/keymile/Kconfig | 1 + boot/Kconfig | 3 +++ cmd/Kconfig | 1 + common/Kconfig | 17 ++++++++--------- drivers/core/Kconfig | 9 +++++---- drivers/cpu/Kconfig | 1 - lib/efi_loader/Kconfig | 6 +++--- 18 files changed, 39 insertions(+), 26 deletions(-)arch/Kconfig +3
-3@@ -93,7 +93,7 @@ config NIOS2 bool "Nios II architecture" select CPU select DM - imply DM_EVENT + select DM_EVENT select OF_CONTROL select SUPPORT_OF_CONTROL imply CMD_DM@@ -111,9 +111,9 @@ config RISCV select SUPPORT_OF_CONTROL select OF_CONTROL select DM + select DM_EVENT imply SPL_SEPARATE_BSS if SPL imply DM_SERIAL - imply DM_EVENT imply DM_MMC imply DM_SPI imply DM_SPI_FLASH@@ -136,6 +136,7 @@ config SANDBOX select BZIP2 select CMD_POWEROFF select DM + select DM_EVENT select DM_FUZZING_ENGINE select DM_GPIO select DM_I2C@@ -240,7 +241,6 @@ config X86 imply CMD_SF imply CMD_SF_TEST imply CMD_ZBOOT - imply DM_EVENT imply DM_GPIO imply DM_KEYBOARD imply DM_MMCarch/arm/Kconfig +4
-5@@ -778,7 +778,6 @@ config ARCH_OMAP2PLUS select SUPPORT_SPL imply TI_SYSC if DM && OF_CONTROL imply FIT - imply DM_EVENT imply SPL_SEPARATE_BSS config ARCH_MESON@@ -823,11 +822,11 @@ config ARCH_IMX8 select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select DM + select DM_EVENT select GPIO_EXTRA_HEADER select MACH_IMX select OF_CONTROL select ENABLE_ARM_SOC_BOOT0_HOOK - imply DM_EVENT config ARCH_IMX8M bool "NXP i.MX8M platform"@@ -839,14 +838,15 @@ config ARCH_IMX8M select SYS_FSL_SEC_LE select SYS_I2C_MXC select DM + select DM_EVENT if CLK select SUPPORT_SPL imply CMD_DM - imply DM_EVENT config ARCH_IMX8ULP bool "NXP i.MX8ULP platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select OF_CONTROL select SUPPORT_SPL@@ -854,19 +854,18 @@ config ARCH_IMX8ULP select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMX9 bool "NXP i.MX9 platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select SUPPORT_SPL select GPIO_EXTRA_HEADER select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMXRT bool "NXP i.MXRT platform"arch/arm/mach-omap2/Kconfig +3
-0@@ -31,6 +31,7 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" + select DM_EVENT select SPL_USE_TINY_PRINTF select SPL_SYS_NO_VECTOR_TABLE if SPL imply NAND_OMAP_ELM@@ -55,6 +56,7 @@ config OMAP54XX bool "OMAP54XX SoC" select ARM_CORTEX_A15_CVE_2017_5715 select ARM_ERRATA_798870 + select DM_EVENT select SYS_THUMB_BUILD imply NAND_OMAP_ELM imply NAND_OMAP_GPMC@@ -111,6 +113,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" select ARM_CORTEX_A8_CVE_2017_5715 + select DM_EVENT select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMCarch/mips/Kconfig +1
-1@@ -121,6 +121,7 @@ config MACH_PIC32 bool "Support Microchip PIC32" select HAS_FIXED_TIMER_FREQUENCY select DM + select DM_EVENT select OF_CONTROL imply CMD_DM@@ -128,7 +129,6 @@ config TARGET_BOSTON bool "Support Boston" select HAS_FIXED_TIMER_FREQUENCY select DM - imply DM_EVENT select DM_SERIAL select MIPS_CM select SYS_CACHE_SHIFT_6arch/powerpc/cpu/mpc85xx/Kconfig +1
-0@@ -248,6 +248,7 @@ config TARGET_KMP204X config TARGET_KMCENT2 bool "Support kmcent2" select VENDOR_KM + select EVENT select FSL_CORENET select SYS_DPAA_FMAN select SYS_DPAA_PMEarch/x86/Kconfig +1
-0@@ -395,6 +395,7 @@ config FSP_VERSION1 config FSP_VERSION2 bool "FSP version 2.x" + select DM_EVENT help This covers versions 2.0 and 2.1. See here for details: https://github.com/IntelFsp/fsp/wikiarch/x86/cpu/baytrail/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_BAYTRAIL select HAVE_FSP select ARCH_MISC_INIT select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/broadwell/Kconfig +1
-0@@ -6,6 +6,7 @@ config INTEL_BROADWELL bool select CACHE_MRC_BIN + select DM_EVENT select ARCH_EARLY_INIT_R imply HAVE_INTEL_ME imply ENABLE_MRC_CACHEarch/x86/cpu/ivybridge/Kconfig +1
-0@@ -8,6 +8,7 @@ config NORTHBRIDGE_INTEL_IVYBRIDGE bool select CACHE_MRC_BIN if HAVE_MRC + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/quark/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_QUARK select HAVE_RMU select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select DM_EVENT imply ENABLE_MRC_CACHE imply ETH_DESIGNWARE imply ICH_SPIboard/google/Kconfig +1
-0@@ -18,6 +18,7 @@ choice config TARGET_CHROMEBOOK_CORAL bool "Chromebook coral" select BIOSEMU + select EVENT help This is a range of Intel-based laptops released in 2018. They use an Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB ofboard/keymile/Kconfig +1
-0@@ -124,6 +124,7 @@ config SYS_IVM_EEPROM_PAGE_LEN config PG_WCOM_UBOOT_UPDATE_SUPPORTED bool "Enable U-boot Field Fail-Safe Update Functionality" + select EVENT default n help Indicates that field fail-safe u-boot update is supported.boot/Kconfig +3
-0@@ -474,6 +474,7 @@ config BOOTMETH_VBE depends on FIT default y select BOOTMETH_GLOBAL + select EVENT help Enables support for VBE boot. This is a standard boot method which supports selection of various firmware components, seleciton of an OS to@@ -482,6 +483,7 @@ config BOOTMETH_VBE config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" depends on SPL && FIT + select EVENT default y if VPL help Enables support for VBE boot. This is a standard boot method which@@ -491,6 +493,7 @@ config SPL_BOOTMETH_VBE config VPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (VPL)" depends on VPL && FIT + select EVENT default y help Enables support for VBE boot. This is a standard boot method whichcmd/Kconfig +1
-0@@ -2622,6 +2622,7 @@ config CMD_DIAG config CMD_EVENT bool "event - Show information about events" + depends on EVENT default y if EVENT_DEBUG help This enables the 'event' command which provides information aboutcommon/Kconfig +8
-9@@ -604,24 +604,23 @@ config CYCLIC_MAX_CPU_TIME_US endif # CYCLIC config EVENT - bool "General-purpose event-handling mechanism" - default y if SANDBOX + bool help - This enables sending and processing of events, to allow interested - parties to be alerted when something happens. This is an attempt to - stem the flow of weak functions, hooks, functions in board_f.c - and board_r.c and the Kconfig options below. + This adds a framework for general purpose sending and processing of + events, to allow interested parties to be alerted when something + happens. This is an attempt to stem the flow of weak functions, + hooks, functions in board_f.c and board_r.c and the Kconfig options + below. See doc/develop/event.rst for more information. if EVENT config EVENT_DYNAMIC - bool "Support event registration at runtime" - default y if SANDBOX + bool help Enable this to support adding an event spy at runtime, without adding - it to the EVENT_SPy() linker list. This increases code size slightly + it to the EVENT_SPY() linker list. This increases code size slightly but provides more flexibility for boards and subsystems that need it. config EVENT_DEBUGdrivers/core/Kconfig +5
-4@@ -109,13 +109,14 @@ config DM_DEVICE_REMOVE causes USB host controllers to not be stopped when booting the OS. config DM_EVENT - bool "Support events with driver model" - depends on DM && EVENT - default y if SANDBOX + bool + depends on DM + select EVENT help This enables support for generating events related to driver model operations, such as prbing or removing a device. Subsystems can - register a 'spy' function that is called when the event occurs. + register a 'spy' function that is called when the event occurs. Such + subsystems must select this option. config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL"drivers/cpu/Kconfig +0
-1@@ -23,7 +23,6 @@ config CPU_RISCV config CPU_MICROBLAZE bool "Enable Microblaze CPU driver" depends on CPU && MICROBLAZE - select EVENT select DM_EVENT select XILINX_MICROBLAZE0_PVR helplib/efi_loader/Kconfig +0
-0lib/efi_loader/Kconfig config EFI_LOADER · line 19
Quoted 9 lines
lib/efi_loader/Kconfig +3
-3@@ -14,9 +14,9 @@ config EFI_LOADER depends on !EFI_APP default y if !ARM || SYS_CPU = armv7 || SYS_CPU = armv8 select CHARSET - select DM_EVENT - select EVENT - select EVENT_DYNAMIC + # We need to send DM events, dynamically, in the EFI block driver + select DM_EVENT if PARTITIONS + select EVENT_DYNAMIC if PARTITIONS
lib/efi_driver/efi_block_device.ois not related to partitions but to block devices.
Quoted 1 line
These 'if's don't make sense.
Yes, it's based on function. From lib/efi_driver/Makefile:
ifeq ($(CONFIG_PARTITIONS),y)
obj-y += efi_block_device.o
endif
Signature · 1 line
Tom
Quoted 432 lines · Tom Rini
Quoted 431 lines · Heinrich Schuchardt
Quoted 417 lines · Tom Rini
The event framework is just that, a framework. Enabling it by itself does nothing, so we shouldn't ask the user about it. Reword (and correct typos) around this the option and help text. This also applies to
DM_EVENTandEVENT_DYNAMIC. OnlyEVENT_DEBUGandCMD_EVENTshould be visible to the user to select, when EVENT is selected.With this, it's time to address the larger problems. When functionality uses events, typically via
EVENT_SPY, the appropriate framework then must be select'd and NOT imply'd. As the functionality will cease to work (and so, platforms will fail to boot) this is non-optional and where select is appropriate. Audit the current users ofEVENT_SPYto have a more fine-grained approach to select'ing the framework where used. Audit the current users ofevent_registerand also selectEVENT_DYNAMIC.Cc AKASHI Takahiro <[email protected]>Cc Heinrich Schuchardt <[email protected]>Reported-by Oliver Graute <[email protected]>Reported-by Francesco Dolcini <[email protected]>Fixes 7fe32b3442f0 ("event: Convert arch_cpu_init_dm() to use events")Fixes 42fdcebf859f ("event: Convert misc_init_f() to use events")Fixes c5ef2025579e ("dm: fix DM_EVENT dependencies")Signed-off-by Tom Rini <[email protected]>Tested-by Simon Glass <[email protected]>Reviewed-by Simon Glass <[email protected]>Reviewed-by Fabio Estevam <[email protected]>---
Changes in v2:
- Collect tags
- Reword the commit message a little, reword and comment on theEFI_LOADERcase.
- Add the rest of the VBE cases I had forgotten.--- arch/Kconfig | 6 +++--- arch/arm/Kconfig | 9 ++++----- arch/arm/mach-omap2/Kconfig | 3 +++ arch/mips/Kconfig | 2 +- arch/powerpc/cpu/mpc85xx/Kconfig | 1 + arch/x86/Kconfig | 1 + arch/x86/cpu/baytrail/Kconfig | 1 + arch/x86/cpu/broadwell/Kconfig | 1 + arch/x86/cpu/ivybridge/Kconfig | 1 + arch/x86/cpu/quark/Kconfig | 1 + board/google/Kconfig | 1 + board/keymile/Kconfig | 1 + boot/Kconfig | 3 +++ cmd/Kconfig | 1 + common/Kconfig | 17 ++++++++--------- drivers/core/Kconfig | 9 +++++---- drivers/cpu/Kconfig | 1 - lib/efi_loader/Kconfig | 6 +++--- 18 files changed, 39 insertions(+), 26 deletions(-)arch/Kconfig +3
-3@@ -93,7 +93,7 @@ config NIOS2 bool "Nios II architecture" select CPU select DM - imply DM_EVENT + select DM_EVENT select OF_CONTROL select SUPPORT_OF_CONTROL imply CMD_DM@@ -111,9 +111,9 @@ config RISCV select SUPPORT_OF_CONTROL select OF_CONTROL select DM + select DM_EVENT imply SPL_SEPARATE_BSS if SPL imply DM_SERIAL - imply DM_EVENT imply DM_MMC imply DM_SPI imply DM_SPI_FLASH@@ -136,6 +136,7 @@ config SANDBOX select BZIP2 select CMD_POWEROFF select DM + select DM_EVENT select DM_FUZZING_ENGINE select DM_GPIO select DM_I2C@@ -240,7 +241,6 @@ config X86 imply CMD_SF imply CMD_SF_TEST imply CMD_ZBOOT - imply DM_EVENT imply DM_GPIO imply DM_KEYBOARD imply DM_MMCarch/arm/Kconfig +4
-5@@ -778,7 +778,6 @@ config ARCH_OMAP2PLUS select SUPPORT_SPL imply TI_SYSC if DM && OF_CONTROL imply FIT - imply DM_EVENT imply SPL_SEPARATE_BSS config ARCH_MESON@@ -823,11 +822,11 @@ config ARCH_IMX8 select SYS_FSL_SEC_COMPAT_4 select SYS_FSL_SEC_LE select DM + select DM_EVENT select GPIO_EXTRA_HEADER select MACH_IMX select OF_CONTROL select ENABLE_ARM_SOC_BOOT0_HOOK - imply DM_EVENT config ARCH_IMX8M bool "NXP i.MX8M platform"@@ -839,14 +838,15 @@ config ARCH_IMX8M select SYS_FSL_SEC_LE select SYS_I2C_MXC select DM + select DM_EVENT if CLK select SUPPORT_SPL imply CMD_DM - imply DM_EVENT config ARCH_IMX8ULP bool "NXP i.MX8ULP platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select OF_CONTROL select SUPPORT_SPL@@ -854,19 +854,18 @@ config ARCH_IMX8ULP select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMX9 bool "NXP i.MX9 platform" select ARM64 select DM + select DM_EVENT select MACH_IMX select SUPPORT_SPL select GPIO_EXTRA_HEADER select MISC select IMX_SENTINEL imply CMD_DM - imply DM_EVENT config ARCH_IMXRT bool "NXP i.MXRT platform"arch/arm/mach-omap2/Kconfig +3
-0@@ -31,6 +31,7 @@ config OMAP34XX config OMAP44XX bool "OMAP44XX SoC" + select DM_EVENT select SPL_USE_TINY_PRINTF select SPL_SYS_NO_VECTOR_TABLE if SPL imply NAND_OMAP_ELM@@ -55,6 +56,7 @@ config OMAP54XX bool "OMAP54XX SoC" select ARM_CORTEX_A15_CVE_2017_5715 select ARM_ERRATA_798870 + select DM_EVENT select SYS_THUMB_BUILD imply NAND_OMAP_ELM imply NAND_OMAP_GPMC@@ -111,6 +113,7 @@ config AM43XX config AM33XX bool "AM33XX SoC" select ARM_CORTEX_A8_CVE_2017_5715 + select DM_EVENT select SPECIFY_CONSOLE_INDEX imply NAND_OMAP_ELM imply NAND_OMAP_GPMCarch/mips/Kconfig +1
-1@@ -121,6 +121,7 @@ config MACH_PIC32 bool "Support Microchip PIC32" select HAS_FIXED_TIMER_FREQUENCY select DM + select DM_EVENT select OF_CONTROL imply CMD_DM@@ -128,7 +129,6 @@ config TARGET_BOSTON bool "Support Boston" select HAS_FIXED_TIMER_FREQUENCY select DM - imply DM_EVENT select DM_SERIAL select MIPS_CM select SYS_CACHE_SHIFT_6arch/powerpc/cpu/mpc85xx/Kconfig +1
-0@@ -248,6 +248,7 @@ config TARGET_KMP204X config TARGET_KMCENT2 bool "Support kmcent2" select VENDOR_KM + select EVENT select FSL_CORENET select SYS_DPAA_FMAN select SYS_DPAA_PMEarch/x86/Kconfig +1
-0@@ -395,6 +395,7 @@ config FSP_VERSION1 config FSP_VERSION2 bool "FSP version 2.x" + select DM_EVENT help This covers versions 2.0 and 2.1. See here for details: https://github.com/IntelFsp/fsp/wikiarch/x86/cpu/baytrail/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_BAYTRAIL select HAVE_FSP select ARCH_MISC_INIT select CPU_INTEL_TURBO_NOT_PACKAGE_SCOPED + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/broadwell/Kconfig +1
-0@@ -6,6 +6,7 @@ config INTEL_BROADWELL bool select CACHE_MRC_BIN + select DM_EVENT select ARCH_EARLY_INIT_R imply HAVE_INTEL_ME imply ENABLE_MRC_CACHEarch/x86/cpu/ivybridge/Kconfig +1
-0@@ -8,6 +8,7 @@ config NORTHBRIDGE_INTEL_IVYBRIDGE bool select CACHE_MRC_BIN if HAVE_MRC + select DM_EVENT imply HAVE_INTEL_ME imply ENABLE_MRC_CACHE imply AHCI_PCIarch/x86/cpu/quark/Kconfig +1
-0@@ -7,6 +7,7 @@ config INTEL_QUARK select HAVE_RMU select ARCH_EARLY_INIT_R select ARCH_MISC_INIT + select DM_EVENT imply ENABLE_MRC_CACHE imply ETH_DESIGNWARE imply ICH_SPIboard/google/Kconfig +1
-0@@ -18,6 +18,7 @@ choice config TARGET_CHROMEBOOK_CORAL bool "Chromebook coral" select BIOSEMU + select EVENT help This is a range of Intel-based laptops released in 2018. They use an Intel Apollo Lake SoC. The design supports WiFi, 4GB to 16GB ofboard/keymile/Kconfig +1
-0@@ -124,6 +124,7 @@ config SYS_IVM_EEPROM_PAGE_LEN config PG_WCOM_UBOOT_UPDATE_SUPPORTED bool "Enable U-boot Field Fail-Safe Update Functionality" + select EVENT default n help Indicates that field fail-safe u-boot update is supported.boot/Kconfig +3
-0@@ -474,6 +474,7 @@ config BOOTMETH_VBE depends on FIT default y select BOOTMETH_GLOBAL + select EVENT help Enables support for VBE boot. This is a standard boot method which supports selection of various firmware components, seleciton of an OS to@@ -482,6 +483,7 @@ config BOOTMETH_VBE config SPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (SPL)" depends on SPL && FIT + select EVENT default y if VPL help Enables support for VBE boot. This is a standard boot method which@@ -491,6 +493,7 @@ config SPL_BOOTMETH_VBE config VPL_BOOTMETH_VBE bool "Bootdev support for Verified Boot for Embedded (VPL)" depends on VPL && FIT + select EVENT default y help Enables support for VBE boot. This is a standard boot method whichcmd/Kconfig +1
-0@@ -2622,6 +2622,7 @@ config CMD_DIAG config CMD_EVENT bool "event - Show information about events" + depends on EVENT default y if EVENT_DEBUG help This enables the 'event' command which provides information aboutcommon/Kconfig +8
-9@@ -604,24 +604,23 @@ config CYCLIC_MAX_CPU_TIME_US endif # CYCLIC config EVENT - bool "General-purpose event-handling mechanism" - default y if SANDBOX + bool help - This enables sending and processing of events, to allow interested - parties to be alerted when something happens. This is an attempt to - stem the flow of weak functions, hooks, functions in board_f.c - and board_r.c and the Kconfig options below. + This adds a framework for general purpose sending and processing of + events, to allow interested parties to be alerted when something + happens. This is an attempt to stem the flow of weak functions, + hooks, functions in board_f.c and board_r.c and the Kconfig options + below. See doc/develop/event.rst for more information. if EVENT config EVENT_DYNAMIC - bool "Support event registration at runtime" - default y if SANDBOX + bool help Enable this to support adding an event spy at runtime, without adding - it to the EVENT_SPy() linker list. This increases code size slightly + it to the EVENT_SPY() linker list. This increases code size slightly but provides more flexibility for boards and subsystems that need it. config EVENT_DEBUGdrivers/core/Kconfig +5
-4@@ -109,13 +109,14 @@ config DM_DEVICE_REMOVE causes USB host controllers to not be stopped when booting the OS. config DM_EVENT - bool "Support events with driver model" - depends on DM && EVENT - default y if SANDBOX + bool + depends on DM + select EVENT help This enables support for generating events related to driver model operations, such as prbing or removing a device. Subsystems can - register a 'spy' function that is called when the event occurs. + register a 'spy' function that is called when the event occurs. Such + subsystems must select this option. config SPL_DM_DEVICE_REMOVE bool "Support device removal in SPL"drivers/cpu/Kconfig +0
-1@@ -23,7 +23,6 @@ config CPU_RISCV config CPU_MICROBLAZE bool "Enable Microblaze CPU driver" depends on CPU && MICROBLAZE - select EVENT select DM_EVENT select XILINX_MICROBLAZE0_PVR helplib/efi_loader/Kconfig +0
-0lib/efi_loader/Kconfig config EFI_LOADER · line 19
Quoted 9 lines
lib/efi_loader/Kconfig +3
-3@@ -14,9 +14,9 @@ config EFI_LOADER depends on !EFI_APP default y if !ARM || SYS_CPU = armv7 || SYS_CPU = armv8 select CHARSET - select DM_EVENT - select EVENT - select EVENT_DYNAMIC + # We need to send DM events, dynamically, in the EFI block driver + select DM_EVENT if PARTITIONS + select EVENT_DYNAMIC if PARTITIONS
lib/efi_driver/efi_block_device.ois not related to partitions but to block devices.
Quoted 6 lines
Quoted 1 line
These 'if's don't make sense.
Yes, it's based on function. From
lib/efi_driver/Makefile:
ifeq ($(CONFIG_PARTITIONS),y)
obj-y += efi_block_device.o
endif
The code in efi_block_device.c does not contain any reference to partitions. Codewise it depends only CONFIG_BLK which is required for CONFIG_EFI_LOADER.
It is code in lib/efi_loader/efi_disk.c which does not compile without CONFIG_PARTITIONS due to missing '#if's.
Please, remove "if PARTITIONS" because it only makes clean-up more complicated.
Best regards
Heinrich