W1: ds2490: Increase timeout when waiting for status
PATCH 1/1 W1: ds2490: Increase timeout when waiting for status
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from 0x81: err=-110. [ 31.504168] 0x81: count=-110, status: [ 31.613404] Failed to read 1-wire data from 0x81: err=-110. [ 31.621915] 0x81: count=-110, status: [ 43.260968] Failed to read 1-wire data from 0x81: err=-110. [ 43.270998] 0x81: count=-110, status: [ 43.379959] Failed to read 1-wire data from 0x81: err=-110. [ 43.388854] 0x81: count=-110, status:
--- drivers/w1/masters/ds2490.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/w1/masters/ds2490.c +1 -1
@@ -253,7 +253,7 @@ static int ds_recv_status_nodump(struct ds_device *dev, struct ds_status *st, count =0 ; err =usb_interrupt_msg (dev->udev,usb_rcvintpipe (dev->udev, - dev->ep[EP_STATUS ]), buf, size, &count,100 ); + dev->ep[EP_STATUS ]), buf, size, &count,1000 );if (err <0 ) {pr_err ("Failed to read 1-wire data from 0x%x: err=%d.\n" , dev->ep[EP_STATUS ], err);
Signature · 1 line
2.1.2
Hi everyone
This looks good to me
Greg, please pull it into your tree
Thank you
25.10.2014, 16:27, "Alexander Stein" <[email protected]>:
Quoted 11 lines
Adjust the bulk message timeout to the other ones (1000ms). Otherwise the following dmesg errors can be seen on a Raspberry Pi:
[ 31.492386] Failed to read 1-wire data from0x81: err=-110. [ 31.504168]0x81: count=-110, status:
[ 31.613404] Failed to read 1-wire data from0x81: err=-110. [ 31.621915]0x81: count=-110, status:
[ 43.260968] Failed to read 1-wire data from0x81: err=-110. [ 43.270998]0x81: count=-110, status:
[ 43.379959] Failed to read 1-wire data from0x81: err=-110. [ 43.388854]0x81: count=-110, status:
Quoted 1 line
Signed-off-by Alexander Stein <[email protected]>