Revert "dma-buf: Make DMABUF_DEBUG default to y on DEBUG_KERNEL kernels"
PATCH 1/1 Revert "dma-buf: Make DMABUF_DEBUG default to y on DEBUG_KERNEL kernels"
This reverts commit 143755bdabaa96776c24f878014608e9cb44f930.
That commit fixed a dangling reference in the DMABUF_DEBUG default and thereby enabled the option - and with it the page-stripping sg_table wrapper that dma_buf_map_attachment() hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.
drm/msm is broken by the wrapper. Both of msm's map paths consume sg->length and sg_phys() of the attachment sg_table:msm_iommu_pagetable_map() for the per-process GPU pagetables, and iommu_map_sg() (via iommu_map_sgtable()) for scanout. The wrapper zeroes sg->length and strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:
gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit 143755bdabaa9.
Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid for sg_tables that msm has dma-mapped itself, which native non-MSM_BO_WC objects' sg_tables are not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page and sg->length of imported sg_tables.
---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma-buf/Kconfig +1 -1
@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the
---
base-commit: 93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3
Signature · 1 line
2.47.3
Quoted 24 lines · Jianfeng Liu
This reverts commit
143755bdabaa96776c24f878014608e9cb44f930.That commit fixed a dangling reference in the
DMABUF_DEBUGdefault and thereby enabled the option - and with it the page-strippingsg_tablewrapper thatdma_buf_map_attachment()hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.drm/msm is broken by the wrapper. Both of msm's map paths consume
sg->lengthandsg_phys()of the attachmentsg_table:msm_iommu_pagetable_map()for the per-process GPU pagetables, andiommu_map_sg()(viaiommu_map_sgtable()) for scanout. The wrapper zeroessg->lengthand strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit
143755bdabaa9.
Quoted 7 lines
Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid forsg_tablesthat msm has dma-mapped itself, which native non-MSM_BO_WC objects'sg_tablesare not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page andsg->lengthof importedsg_tables.
I sent a series[1] to remove the remaining (direct) use of pages for imported dma-bufs, and remove use of drm_prime_sg_to_page_array() (so one less caller of the deprecated function).
This on its own won't solve the problems with CONFIG_DMABUF_DEBUG. There is still the indirect dependency on pages when mapping sgt's. I won't have time to work on that until after XDC, so it won't be a v7.3 thing, and _probably_ won't be a v7.4 thing at this point. But hopefully I can come up with something for v7.5. Until then, please apply this revert.
BR,
-R
[1] https://patchwork.freedesktop.org/series/175045/
Quoted 32 lines
Suggested-by Rob Clark <[email protected]>Cc Christian König <[email protected]>Cc Sumit Semwal <[email protected]>Cc Karl Mehltretter <[email protected]>Signed-off-by Jianfeng Liu <[email protected]>---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma-buf/Kconfig +1
-2@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the ---base-commit:
93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3--
2.47.3
Christian König
maintainerQuoted 21 lines · Jianfeng Liu
That commit fixed a dangling reference in the
DMABUF_DEBUGdefault and thereby enabled the option - and with it the page-strippingsg_tablewrapper thatdma_buf_map_attachment()hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.drm/msm is broken by the wrapper. Both of msm's map paths consume
sg->lengthandsg_phys()of the attachmentsg_table:msm_iommu_pagetable_map()for the per-process GPU pagetables, andiommu_map_sg()(viaiommu_map_sgtable()) for scanout. The wrapper zeroessg->lengthand strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit
143755bdabaa9.
Quoted 7 lines
Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid forsg_tablesthat msm has dma-mapped itself, which native non-MSM_BO_WC objects'sg_tablesare not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page andsg->lengthof importedsg_tables.
Yeah as I said before the problematic part is MSM here. We have enforced correct driver behavior for over 5 years now when that option is enabled.
What we can do is to mark MSM as broken and/or give a warning in MSM when DMABUF_DEBUG is enabled and you try to import a DMA-buf.
But making the check not default to enable on debug kernels is not an option. This check here is exactly to point out broken drivers and you can manually disable it.
Regards,
Christian.
Quoted 30 lines
Suggested-by Rob Clark <[email protected]>Cc Christian König <[email protected]>Cc Sumit Semwal <[email protected]>Cc Karl Mehltretter <[email protected]>Signed-off-by Jianfeng Liu <[email protected]>---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma-buf/Kconfig +1
-2@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the ---base-commit:
93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3
Quoted 31 lines · Christian König
Quoted 21 lines · Jianfeng Liu
That commit fixed a dangling reference in the
DMABUF_DEBUGdefault and thereby enabled the option - and with it the page-strippingsg_tablewrapper thatdma_buf_map_attachment()hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.drm/msm is broken by the wrapper. Both of msm's map paths consume
sg->lengthandsg_phys()of the attachmentsg_table:msm_iommu_pagetable_map()for the per-process GPU pagetables, andiommu_map_sg()(viaiommu_map_sgtable()) for scanout. The wrapper zeroessg->lengthand strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit
143755bdabaa9.Quoted 7 lines
Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid forsg_tablesthat msm has dma-mapped itself, which native non-MSM_BO_WC objects'sg_tablesare not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page andsg->lengthof importedsg_tables.
Quoted 1 line
Yeah as I said before the problematic part is MSM here. We have enforced correct driver behavior for over 5 years now when that option is enabled.
The problem is bigger than MSM here
Quoted 1 line
What we can do is to mark MSM as broken and/or give a warning in MSM when
DMABUF_DEBUGis enabled and you try to import a DMA-buf.
sorry, no, we can't mark MSM as broken.. we can mark DMABUF_DEBUG as BROKEN
BR,
-R
Quoted 36 lines
But making the check not default to enable on debug kernels is not an option. This check here is exactly to point out broken drivers and you can manually disable it.
Regards,
Christian.Quoted 30 lines
Suggested-by Rob Clark <[email protected]>Cc Christian König <[email protected]>Cc Sumit Semwal <[email protected]>Cc Karl Mehltretter <[email protected]>Signed-off-by Jianfeng Liu <[email protected]>---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma-buf/Kconfig +1
-2@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the ---base-commit:
93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3
Christian König
maintainerQuoted 33 lines · Rob Clark
Quoted 31 lines · Christian König
Quoted 28 lines · Jianfeng Liu
That commit fixed a dangling reference in the
DMABUF_DEBUGdefault and thereby enabled the option - and with it the page-strippingsg_tablewrapper thatdma_buf_map_attachment()hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.drm/msm is broken by the wrapper. Both of msm's map paths consume
sg->lengthandsg_phys()of the attachmentsg_table:msm_iommu_pagetable_map()for the per-process GPU pagetables, andiommu_map_sg()(viaiommu_map_sgtable()) for scanout. The wrapper zeroessg->lengthand strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit
143755bdabaa9.Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid forsg_tablesthat msm has dma-mapped itself, which native non-MSM_BO_WC objects'sg_tablesare not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page andsg->lengthof importedsg_tables.
Quoted 3 lines
Quoted 1 line
Yeah as I said before the problematic part is MSM here. We have enforced correct driver behavior for over 5 years now when that option is enabled.
The problem is bigger than MSM here
Well, so far I have only heard about MSM.
But yes I mean the config option is doing exactly what it is supposed to do, pointing out when driver need some work to get this fixed.
I also agree that we shouldn't have allowed driver to touch that stuff in the first place and better document how to do things but yeah I can't change the past I can only try to fix it now.
Quoted 3 lines
Quoted 1 line
What we can do is to mark MSM as broken and/or give a warning in MSM when
DMABUF_DEBUGis enabled and you try to import a DMA-buf.sorry, no, we can't mark MSM as broken.. we can mark
DMABUF_DEBUGas BROKEN
As I wrote the debug functionality to enforce not using struct pages has been around for over 5 years now, it was just not enabled by default.
What I can offer is to set it to default N for another few month to give you more time to fix things.
Regards,
Christian.
Quoted 40 lines
BR,
-RQuoted 36 lines
But making the check not default to enable on debug kernels is not an option. This check here is exactly to point out broken drivers and you can manually disable it.
Regards,
Christian.Quoted 30 lines
Suggested-by Rob Clark <[email protected]>Cc Christian König <[email protected]>Cc Sumit Semwal <[email protected]>Cc Karl Mehltretter <[email protected]>Signed-off-by Jianfeng Liu <[email protected]>---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma-buf/Kconfig +1
-2@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the ---base-commit:
93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3
Quoted 35 lines · Christian König
Quoted 33 lines · Rob Clark
Quoted 31 lines · Christian König
Quoted 28 lines · Jianfeng Liu
That commit fixed a dangling reference in the
DMABUF_DEBUGdefault and thereby enabled the option - and with it the page-strippingsg_tablewrapper thatdma_buf_map_attachment()hands to importers - on every kernel with DEBUG_KERNEL=y, i.e. virtually every distro kernel.drm/msm is broken by the wrapper. Both of msm's map paths consume
sg->lengthandsg_phys()of the attachmentsg_table:msm_iommu_pagetable_map()for the per-process GPU pagetables, andiommu_map_sg()(viaiommu_map_sgtable()) for scanout. The wrapper zeroessg->lengthand strips the page pointers, so mappings of imported dma-bufs silently map nothing, and userspace observes arm-smmu translation faults from UCHE, e.g. during hardware video decode (clapper, chromium) on Adreno systems:gpu fault: ttbr0=000000088a889000 iova=000000010741c000 dir=READ type=TRANSLATION source=UCHE
Bisected on a Snapdragon X1E78100 laptop as v7.3-rc3 good, v7.3-rc4 bad, culprit
143755bdabaa9.Switching msm to sg_dma_address()/sg_dma_len() is not a trivial fix
either: those fields are only valid forsg_tablesthat msm has dma-mapped itself, which native non-MSM_BO_WC objects'sg_tablesare not, so the conversion needs more work. The msm maintainer has therefore requested restoring the previous default for v7.3, to be revisited once msm no longer consumes struct page andsg->lengthof importedsg_tables.
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
Yeah as I said before the problematic part is MSM here. We have enforced correct driver behavior for over 5 years now when that option is enabled.
The problem is bigger than MSM here
Well, so far I have only heard about MSM.
But yes I mean the config option is doing exactly what it is supposed to do, pointing out when driver need some work to get this fixed.
It served its purpose, to expose some bigger issues.. but sadly those are beyond just msm and not something that can be fixed quickly
Quoted 9 lines
I also agree that we shouldn't have allowed driver to touch that stuff in the first place and better document how to do things but yeah I can't change the past I can only try to fix it now.
Quoted 3 lines
Quoted 1 line
What we can do is to mark MSM as broken and/or give a warning in MSM when
DMABUF_DEBUGis enabled and you try to import a DMA-buf.sorry, no, we can't mark MSM as broken.. we can mark
DMABUF_DEBUGas BROKENAs I wrote the debug functionality to enforce not using struct pages has been around for over 5 years now, it was just not enabled by default.
What I can offer is to set it to default N for another few month to give you more time to fix things.
If it is disabled by default in distro kernels, that sounds fine. I've cleaned up the remaining use of pages in msm (which were not load bearing, but I should have done before to remove use of drm_prime_sg_to_page_array()), but the problems extend further and is a bit complicated because the hw uses SSMU in a way that dma-mapping doesn't consider very well.
BR,
-R
Quoted 44 lines
Regards,
Christian.Quoted 40 lines
BR,
-RQuoted 36 lines
But making the check not default to enable on debug kernels is not an option. This check here is exactly to point out broken drivers and you can manually disable it.
Regards,
Christian.Quoted 30 lines
Suggested-by Rob Clark <[email protected]>Cc Christian König <[email protected]>Cc Sumit Semwal <[email protected]>Cc Karl Mehltretter <[email protected]>Signed-off-by Jianfeng Liu <[email protected]>---
drivers/dma-buf/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/dma-buf/Kconfig +1
-2@@ -43,7 +43,7 @@ config UDMABUF config DMABUF_DEBUG bool "DMA-BUF debug checks" depends on DMA_SHARED_BUFFER - default y if DEBUG_KERNEL + default y if DEBUG help This option enables additional checks for DMA-BUF importers and exporters. Specifically it validates that importers do not peek at the ---base-commit:
93f51579e7df248780214094418f205253383cc5
branch: revert-dmabuf-debug-for-7.3
Quoted 4 lines · Rob Clark
On Mon, Sep 28, 2026 at 3:48 AM Christian König
Quoted 1 line
What I can offer is to set it to default N for another few month to give you more time to fix things.
If it is disabled by default in distro kernels, that sounds fine.
Another option is to restore the earlier DMABUF_DEBUG default for now, although off by default is also fine with me:
default y if DMA_API_DEBUG
I would like to help fix the affected importers, and have started work on several of them. Beyond msm, my LLM agent found paths that use the page or CPU-length fields of imported attachment tables in:
- rockchip, tegra, rcar-du/VSP, omapdrm and xen_drm_front;
- tegra-vde, staging ipu3, pxa_camera and sur40;
- fastrpc's SECUREMAP path;
- the IIO dmaengine buffer, USB FunctionFS and UVC gadget DMABUF paths.
The host1x imported-buffer gather path also looks susceptible. There are less severe cases too: amdxdna rejects the affected import, while mali-dp loses MMU prefetch.
For sur40, IIO, FunctionFS and UVC gadget, I have reproduced failures and tested local fixes in QEMU using local device models. The other entries above are findings from source inspection, not hardware tests. Some failures depend on the architecture and configuration, in particular whether NEED_SG_DMA_LENGTH is enabled.
Unfortunately, I don't have hardware for most of these drivers...
I think the drivers managing their own IOMMU mappings also need a clearer supported path here. Simply switching from physical addresses to DMA addresses is not generally sufficient, since the latter belong to the attachment device's address space.
I also have a draft warning-only mode for DMABUF_DEBUG that I can post as an RFC. It preserves the CPU fields and logs suspect accesses instead of deliberately breaking importers. Coverage is incomplete and the underlying bugs still need fixing; strict mode would remain available.
Thanks,
Karl