arm64: dts: rockchip: enable display nodes on rk3328-roc-cc
Subsystems (2)
PATCH 1/1 arm64: dts: rockchip: enable display nodes on rk3328-roc-cc
Enable necessary nodes to get output on the hdmi port of the board.
This is a port of Heiko's patch for the rock64.
Signed-off-by Leonidas P. Papadakos <[email protected]>
--- arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
arch/arm64/boot/dts/rockchip/rk3328-roc-cc.dts +16 -0
@@ -145,6 +145,14 @@ status = "okay"; }; +&hdmi { + status = "okay"; +}; + +&hdmiphy { + status = "okay"; +}; + &i2c1 { status = "okay";
@@ -328,3 +336,11 @@ &usb_host0_ohci { status = "okay"; }; + +&vop { + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +};
Signature · 1 line
2.21.0
A message that is not in the archive (sent off-list or not yet received): 20190403182248.16164-1-papadakospan-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Am Mittwoch, 3. April 2019, 20:22:48 CEST schrieb Leonidas P. Papadakos:
Quoted 5 lines
Enable necessary nodes to get output on the hdmi port of the board.
This is a port of Heiko's patch for the rock64.
Signed-off-by Leonidas P. Papadakos <[email protected]>
applied for 5.2
Thanks
Heiko