How to interface piTFT2.8" with Raspberrypi using fbtft driver?
Hii need to interface piTFT2.8" resistive display with raspberrypi using fbtft driver. i want to insert this driver in Yocto Image that I have built.But I really dont know how? I can find fbtft driver under stagging directory (in linux3.18.11+) but when it would be officially available as feature/package ? Putting piTFT2.8" driver is extremely easy in Raspbian but when i try to do the same in Yocto built image, it gives error (I thing libc issue, which is looking for gcc4.6 and in Yocto we have gcc4.9/5.1).Any help would be appreciated. Abhishek
Quoted 8 lines · abhishek srivastava
Hi
i need to interface piTFT2.8" resistive display with raspberrypi using fbtft driver. i want to insert this driver in Yocto Image that I have built.
But I really dont know how? I can find fbtft driver under stagging directory (in linux3.18.11+) but when it would be officially available as feature/package ? Putting piTFT2.8" driver is extremely easy in Raspbian but when i try to do the same in Yocto built image, it gives error (I thing libc issue, which is looking for gcc4.6 and in Yocto we have gcc4.9/5.1). Any help would be appreciated.
if you send logs and error messages etc. it will be easier to help. Plus I would recommend to read through manual on how to add new recipe
and also if its a kernel module then how to add that would be simply adding the relevant kernel module package to your image using IMAGE_INSTALL if its not happening already, but you really need to provide more information.
Quoted 8 lines
Abhishek
--
_______________________________________________
yocto mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/yocto