Problems with nftl (fwd)

The patch makes a little more sense in context. Resent with permission...

--
dwmw2

------- Forwarded Message

Date: Tue, 17 Jul 2001 12:17:40 +0200
To: [email protected]
Subject: Problems with nftl
From: [email protected] (Cemil Degirmenci)

Sorry that i mail directly to you, but the mailinglist refused my mail with the reason "unknown local part".

I have some Problems with nftl_format.
In Consolemodus there is no problem with it.
I can use nftl_format in less than 20 Seconds, fdisk it, and make a ext2 Filesystem on it.
But when i start my XFree, its very slow, and eats about 99% of CPU. A nftl_format needs 10minutes under X, and takes a lot of CPU-capacity. Moving my mouse is not possible during the process.
Here are some infos, i dont know if you need them:

The MTD-Version i use:
mtd-snapshot-20010716.tar.bz2

The way i patched my 2.4.6-Kernel:
sh patchin.sh /usr/src/linux

I have activated the follwing Options in Kernel:
- -Memory Technology Device (MTD) support
- -Debugging
- -MTD partitioning support
- -Direct char device access to MTD devices
- -FTL (Flash Translation Layer) support
- -NFTL (NAND Flash Translation Layer) support
- -Write support for NFTL (BETA)

Self-contained MTD device drivers
- -Test driver using RAM
(4096) MTDRAM device size in KiB
(128) MTDRAM erase block size in KiB
(0) SRAM Hexadecimal Absolute position or 0
<*> M-Systems Disk-On-Chip 2000 and Millennium

The Next Thing:
What would be the best way of booting the chip? a patched lilo? Grub? Is there an good howto for it?
I want to Install a complett Server on it using httpd or dhcp, whatever.

thanks,
- --

Cemil Degirmenci                //   http://cemil.debian-linux.de
Am Eisenberg 13                 //   Tel.       06638-9180010   
36341 Lauterbach                //   Mobil.     0177-2541153
Germany                         //   E-Mail     [email protected]

------- End of Forwarded Message