Skip to contentSkip to conversation

need help to enable ARM AMBA PL031 RTC

DISCUSSION Hebbar 2 participants 2 messages Jul 15, 2008

lore
Share & tools
lore

Hebbar

author
#0 lore raw

I all,

I am working on customized arm versatile board and i am trying to use ARM AMBA PL031 RTC.

i enabled CONFIG_RTC_DRV_PL031=y

But the date never changes or updates.

/ # cat /sys/class/rtc/rtc0/time
00:00:00

When i went through the Ref Manual of ARM AMBA PL031 RTC i found that we need to enable or set high to RTC START bit (bit 0) in RTC Control Register ( 0x0C ).

but in rtc-pl031.c, RTC_START is no where set in RTC CONTROL Register.

I think we need to enable it in rtc_probe func after rtc_device_register returns success.

#define RTC_CR_MIE (1 << 0)

__raw_writel(RTC_CR_MIE, ldata->base + RTC_CR);

Kindly Comment.

Regards
Gururaja

Signature · 2 lines
View this message in context: http://www.nabble.com/need-help-to-enable-ARM-AMBA-PL031-RTC-tp18462244p18462244.html
Sent from the linux-kernel mailing list archive at Nabble.com.
#1 lore raw
Quoted 5 lines · Hebbar

I all,

I am working on customized arm versatile board and i am trying to use ARM AMBA PL031 RTC.

[email protected] is the right place to discuss this, although I belive it is moderated for non-subscribers.

Quoted 35 lines

i enabled CONFIG_RTC_DRV_PL031=y

But the date never changes or updates.

/ # cat /sys/class/rtc/rtc0/time
00:00:00

When i went through the Ref Manual of ARM AMBA PL031 RTC i found that we need to enable or set high to RTC START bit (bit 0) in RTC Control Register ( 0x0C ).

but in rtc-pl031.c, RTC_START is no where set in RTC CONTROL Register.

I think we need to enable it in rtc_probe func after rtc_device_register returns success.

#define RTC_CR_MIE (1 << 0)

__raw_writel(RTC_CR_MIE, ldata->base + RTC_CR);

Kindly Comment.

Regards
Gururaja

Signature · 8 lines
View this message in context: http://www.nabble.com/need-help-to-enable-ARM-AMBA-PL031-RTC-tp18462244p18462244.html
Sent from the linux-kernel mailing list archive at Nabble.com.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/
Signature · 3 lines
Ben ([email protected], http://www.fluff.org/)

  'a smiley only costs 4 bytes'