Skip to contentSkip to conversation

Too many poll_idle cpu calls in kernel 3.2 rc-series

DISCUSSION Nicolas Kalkhof 1 participant 1 message Nov 30, 2011

lore
Share & tools
lore
#0 lore raw

Hi Andi, Hi Deepthi

I'm still in the process of reverting and testing the commits.

I definately have to pass idle=mwait as boot paremeter otherwise powertop looks like below. CONFIG_INTEL_IDLE does not change that. Strange thing I too have a Lenovo T420 with a I7-2620M.

cat /proc/cpuinfo
processor       : 0
vendor_id       : GenuineIntel
cpu family      : 6
model           : 42
model name      : Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz
stepping        : 7
microcode       : 0x1b
cpu MHz         : 800.000
cache size      : 4096 KB
physical id     : 0
siblings        : 2
core id         : 0
cpu cores       : 2
apicid          : 0
initial apicid  : 0
fpu             : yes
fpu_exception   : yes
cpuid level     : 13
wp              : yes
flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp lm constant_tsc arch_perfmon pebs bts nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer aes xsave avx lahf_lm ida arat epb xsaveopt pln pts dts tpr_shadow vnmi flexpriority ept vpid bogomips        : 5382.00
clflush size    : 64
cache_alignment : 64
address sizes   : 36 bits physical, 48 bits virtual
power management:

Maybe there is a Problem with my configuration I don't know. Again I've attached my kernel .config. Dmesg reports a problem when I use poll=mwait:

WARNING: at arch/x86/kernel/process.c:622 idle_setup+0x8f/0xef()
"idle=mwait" will be removed in 2012
Modules linked in:
Pid: 0, comm: swapper Not tainted 3.2.0-rc3-next-20111130 #1
Call Trace:
 [<ffffffff8102d1d2>] ? warn_slowpath_common+0x78/0x8c
 [<ffffffff8102d287>] ? warn_slowpath_fmt+0x45/0x4a
 [<ffffffff81575ff2>] ? idle_setup+0x8f/0xef
 [<ffffffff815706d7>] ? do_early_param+0x54/0x7d
 [<ffffffff81040b02>] ? parse_args+0x16a/0x21a
 [<ffffffff81570683>] ? unknown_bootoption+0x1e2/0x1e2
 [<ffffffff81570753>] ? parse_early_param+0x31/0x40
 [<ffffffff815730d9>] ? setup_arch+0x317/0x8f7
 [<ffffffff813b29b5>] ? printk+0x40/0x4b
 [<ffffffff815707e5>] ? start_kernel+0x81/0x314
---[ end trace 4eaa2a86a8e2da22 ]---

Using CONFIG_INTEL_IDLE top/htop sometimes shows 100% cpu load on both cores for quite some time however the cpu stays idle at low frequency and temperature. That's why I've disabled INTEL_IDLE.

without passing poll=mwait powertop 1.98 shows:

         Package   |             Core    |            CPU 0

                    |                     | C0 active  48.2%
                    |                     | POLL       84.7%    1.3 ms
                    |                     | C1-SNB      0.0%    0.0 ms
C2 (pc2)    0.0%    |                     |
C3 (pc3)    0.0%    | C3 (cc3)    0.0%    | C3-SNB      0.0%    0.0 ms
C6 (pc6)    0.0%    | C6 (cc6)    0.0%    | C6-SNB      0.0%    0.0 ms
C7 (pc7)    0.0%    | C7 (cc7)    0.0%    | C7-SNB      0.0%    0.0 ms
                    |             Core    |            CPU 1
                    |                     | C0 active  48.2%
                    |                     | POLL       89.1%    1.4 ms
                    |                     | C1-SNB      0.0%    0.0 ms
                    |                     |
                    | C3 (cc3)    0.0%    | C3-SNB      0.0%    0.0 ms
                    | C6 (cc6)    0.0%    | C6-SNB      0.0%    0.0 ms
                    | C7 (cc7)    0.0%    | C7-SNB      0.0%    0.0 ms

Regards,
Nic

Quoted 9 lines · Andi Kleen
Quoted 3 lines · Nicolas Kalkhof

Andi,

correct. The issue was introduced somewhere between 3.1 final and 3.2-rc1. I've tried to track down the bad commit but so far I haven't been successfull. The only workaround I found is to set the idle boot parameter to mwait and to disable CONFIG_INTEL_IDLE. Somehow the kernel seems to set idle to poll by default - no idea why :-(. I wonder if other mobile sandy bridge cpus are affected as well.

There are only a few changesets affecting drivers/idle

Can you try to git revert

Quoted 7 lines

46bcfad7a819bd17ac4e831b04405152d59784ab
4202735e8ab6ecfb0381631a0d0b58fefe0bd4e2
e978aa7d7d57d04eb5f88a7507c4fb98577def77

?

-Andi

Hi,

I am guessing that for workaround just setting the idle boot parameter to mwait should work. Have u tested this without disabling CONFIG_INTEL_IDLE ?

Also one thing to note from your logs is, cpu is not entering any of the other C states except for POLL. Can you also check if your are enabling only POLL for idle. I am able to enter deeper C-states on i5-2540M with Intel_Idle enabled.

Power top o/p:
-------------

            Core    |             CPU 0               CPU 1
POLL        0.0%    | POLL        0.0%    0.0 ms      0.0%    0.0 ms
C1-SNB      1.4%    | C1-SNB      2.2%    0.7 ms      0.5%    0.9 ms
C3-SNB      0.9%    | C3-SNB      1.6%    1.2 ms      0.1%    1.2 ms
C6-SNB      0.2%    | C6-SNB      0.3%    1.6 ms      0.0%    0.9 ms
C7-SNB     95.8%    | C7-SNB     93.7%    3.7 ms     97.8%   15.1 ms

Regards,
Deepthi

___________________________________________________________
SMS schreiben mit WEB.DE FreeMail - einfach, schnell und kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192

Linux version 3.2.0-rc3-next-20111130 (root@gonzo) (gcc version 4.5.3 (Gentoo 4.5.3-r1 p1.0, pie-0.4.5) ) #1 SMP Wed Nov 30 11:28:50 CET 2011 Command line: root=/dev/sda7 idle=mwait intel_iommu=off pcie_aspm=force i915.powersave=1 i915.i915_enable_rc6=1 Disabled fast string operations
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
BIOS-e820: 0000000040200000 - 00000000da99f000 (usable)
BIOS-e820: 00000000da99f000 - 00000000dae9f000 (reserved)
BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS)
BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data)
BIOS-e820: 00000000dafff000 - 00000000db000000 (usable)
BIOS-e820: 00000000db000000 - 00000000dfa00000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffd20000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 000000021e600000 (usable)
BIOS-e820: 000000021e600000 - 000000021e800000 (reserved)

------------[ cut here ]------------
WARNING: at arch/x86/kernel/process.c:622 idle_setup+0x8f/0xef()
"idle=mwait" will be removed in 2012
Modules linked in:
Pid: 0, comm: swapper Not tainted 3.2.0-rc3-next-20111130 #1
Call Trace:
 [<ffffffff8102d1d2>] ? warn_slowpath_common+0x78/0x8c
 [<ffffffff8102d287>] ? warn_slowpath_fmt+0x45/0x4a
 [<ffffffff81575ff2>] ? idle_setup+0x8f/0xef
 [<ffffffff815706d7>] ? do_early_param+0x54/0x7d
 [<ffffffff81040b02>] ? parse_args+0x16a/0x21a
 [<ffffffff81570683>] ? unknown_bootoption+0x1e2/0x1e2
 [<ffffffff81570753>] ? parse_early_param+0x31/0x40
 [<ffffffff815730d9>] ? setup_arch+0x317/0x8f7
 [<ffffffff813b29b5>] ? printk+0x40/0x4b
 [<ffffffff815707e5>] ? start_kernel+0x81/0x314
---[ end trace 4eaa2a86a8e2da22 ]---

NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: LENOVO 4236NGG/4236NGG, BIOS 83ET64WW (1.34 ) 09/08/2011
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
No AGP bridge found
last_pfn = 0x21e600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0FFC00000 mask FFFC00000 write-protect
1 base 000000000 mask F80000000 write-back
2 base 080000000 mask FC0000000 write-back
3 base 0C0000000 mask FE0000000 write-back
4 base 0DC000000 mask FFC000000 uncachable
5 base 0DB000000 mask FFF000000 uncachable
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FE0000000 write-back
8 base 21F000000 mask FFF000000 uncachable
9 base 21E800000 mask FFF800000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xdb000 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Base memory trampoline at [ffff88000009b000] 9b000 size 8192
init_memory_mapping: 0000000000000000-00000000db000000
0000000000 - 00db000000 page 2M
kernel direct mapping tables up to db000000 @ 1fffb000-20000000
init_memory_mapping: 0000000100000000-000000021e600000
0100000000 - 021e600000 page 2M
kernel direct mapping tables up to 21e600000 @ da995000-da99f000
ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
ACPI: XSDT 00000000daffe120 000A4 (v01 LENOVO TP-83 00001340 PTEC 00000002)
ACPI: FACP 00000000dafe8000 000F4 (v04 LENOVO TP-83 00001340 PTL 00000002)
ACPI: DSDT 00000000dafeb000 0E3EA (v01 LENOVO TP-83 00001340 INTL 20061109)
ACPI: FACS 00000000daf2d000 00040
ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-83 00001340 PTEC 00000001)
ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
ACPI: SSDT 00000000daffa000 00797 (v01 LENOVO SataAhci 00001000 INTL 20061109)
ACPI: HPET 00000000dafe7000 00038 (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: APIC 00000000dafe6000 00098 (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: MCFG 00000000dafe5000 0003C (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: ECDT 00000000dafe4000 00052 (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: ASF! 00000000dafea000 000A5 (v32 LENOVO TP-83 00001340 PTL 00000002)
ACPI: TCPA 00000000dafe3000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
ACPI: SSDT 00000000dafe2000 00A69 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
ACPI: SSDT 00000000dafe1000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
ACPI: UEFI 00000000dafe0000 0003E (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: UEFI 00000000dafdf000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: UEFI 00000000dafde000 00292 (v01 LENOVO TP-83 00001340 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at 0000000000000000-000000021e600000
Initmem setup node 0 0000000000000000-000000021e600000
NODE_DATA [000000021e5fb000 - 000000021e5fffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
Zone PFN ranges:

  DMA      0x00000010 -> 0x00001000
  DMA32    0x00001000 -> 0x00100000
  Normal   0x00100000 -> 0x0021e600
Movable zone start PFN for each node
early_node_map[6] active PFN ranges
    0: 0x00000010 -> 0x0000009d
    0: 0x00000100 -> 0x00020000
    0: 0x00020200 -> 0x00040000
    0: 0x00040200 -> 0x000da99f
    0: 0x000dafff -> 0x000db000
    0: 0x00100000 -> 0x0021e600

On node 0 totalpages: 2067245
DMA zone: 64 pages used for memmap
DMA zone: 2 pages reserved
DMA zone: 3915 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 873952 pages, LIFO batch:31
Normal zone: 18328 pages used for memmap
Normal zone: 1154664 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a301 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 25 pages/cpu @ffff88021e200000 s69760 r8192 d24448 u1048576
pcpu-alloc: s69760 r8192 d24448 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032531
Policy zone: Normal
Kernel command line: root=/dev/sda7 idle=mwait intel_iommu=off pcie_aspm=force i915.powersave=1 i915.i915_enable_rc6=1
Intel-IOMMU: disabled
PCIe ASPM is forcibly enabled
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8064720k/8886272k available (3811k kernel code, 617292k absent, 204260k reserved, 1679k data, 616k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:4352 nr_irqs:512 16
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2691.392 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 5382.78 BogoMIPS (lpj=2691392)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Disabled fast string operations
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
Freeing SMP alternatives: 20k freed
ACPI: Core revision 20110623
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM) i7-2620M CPU @ 2.70GHz stepping 07
Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.

... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             000000070000000f

Booting Node 0, Processors #1 Ok.
smpboot cpu 1: start_ip = 9b000
Disabled fast string operations
Brought up 2 CPUs
Total of 2 processors activated (10765.56 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: EC description table is found, configuring boot EC
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [PUBS] (on)
ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
ACPI: ACPI Dock Station Driver: 2 docks/bays found
HEST: Table not found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
pci 0000:00:02.0: [8086:0126] type 0 class 0x000300
pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
pci 0000:00:16.0: reg 10: [mem 0xf1525000-0xf152500f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
pci 0000:00:19.0: reg 10: [mem 0xf1500000-0xf151ffff]
pci 0000:00:19.0: reg 14: [mem 0xf152b000-0xf152bfff]
pci 0000:00:19.0: reg 18: [io 0x4080-0x409f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
pci 0000:00:1a.0: reg 10: [mem 0xf152a000-0xf152a3ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
pci 0000:00:1b.0: reg 10: [mem 0xf1520000-0xf1523fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
pci 0000:00:1d.0: reg 10: [mem 0xf1529000-0xf15293ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106

pci 0000:00:1f.2: reg 10: [io  0x40a8-0x40af]
pci 0000:00:1f.2: reg 14: [io  0x40b4-0x40b7]
pci 0000:00:1f.2: reg 18: [io  0x40a0-0x40a7]
pci 0000:00:1f.2: reg 1c: [io  0x40b0-0x40b3]
pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]

pci 0000:00:1f.2: reg 24: [mem 0xf1528000-0xf15287ff] pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xf1524000-0xf15240ff 64bit] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:03:00.0: [8086:4238] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xf1400000-0xf1401fff 64bit] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
pci 0000:0d:00.0: [1180:e822] type 0 class 0x000880 pci 0000:0d:00.0: reg 10: [mem 0xf0c00000-0xf0c000ff] pci 0000:0d:00.0: supports D1 D2
pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:0d:00.0: PME# disabled
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]

pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]

ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
ACPI _OSC control for PCIe not granted, disabling ASPM
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Advanced Linux Sound Architecture Driver Version 1.0.24.
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 000000000009d800 - 000000000009ffff
reserve RAM buffer: 00000000da99f000 - 00000000dbffffff
reserve RAM buffer: 00000000db000000 - 00000000dbffffff
reserve RAM buffer: 000000021e600000 - 000000021fffffff
cfg80211: Calling CRDA to update world regulatory domain
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [mem 0x00000000-0x0009ffff]
pnp 00:00: [mem 0x000c0000-0x000c3fff]
pnp 00:00: [mem 0x000c4000-0x000c7fff]
pnp 00:00: [mem 0x000c8000-0x000cbfff]
pnp 00:00: [mem 0x000cc000-0x000cffff]
pnp 00:00: [mem 0x000d0000-0x000d3fff]
pnp 00:00: [mem 0x000d4000-0x000d7fff]
pnp 00:00: [mem 0x000d8000-0x000dbfff]
pnp 00:00: [mem 0x000dc000-0x000dffff]
pnp 00:00: [mem 0x000e0000-0x000e3fff]
pnp 00:00: [mem 0x000e4000-0x000e7fff]
pnp 00:00: [mem 0x000e8000-0x000ebfff]
pnp 00:00: [mem 0x000ec000-0x000effff]
pnp 00:00: [mem 0x000f0000-0x000fffff]
pnp 00:00: [mem 0x00100000-0xdf9fffff]
pnp 00:00: [mem 0xfec00000-0xfed3ffff]
pnp 00:00: [mem 0xfed4c000-0xffffffff]
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved system 00:00: [mem 0x000ec000-0x000effff] could not be reserved system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: [bus 00-fe]

pnp 00:01: [io  0x0cf8-0x0cff]
pnp 00:01: [io  0x0000-0x0cf7 window]
pnp 00:01: [io  0x0d00-0xffff window]

pnp 00:01: [mem 0x000a0000-0x000bffff window]
pnp 00:01: [mem 0x000c0000-0x000c3fff window]
pnp 00:01: [mem 0x000c4000-0x000c7fff window]
pnp 00:01: [mem 0x000c8000-0x000cbfff window]
pnp 00:01: [mem 0x000cc000-0x000cffff window]
pnp 00:01: [mem 0x000d0000-0x000d3fff window]
pnp 00:01: [mem 0x000d4000-0x000d7fff window]
pnp 00:01: [mem 0x000d8000-0x000dbfff window]
pnp 00:01: [mem 0x000dc000-0x000dffff window]
pnp 00:01: [mem 0x000e0000-0x000e3fff window]
pnp 00:01: [mem 0x000e4000-0x000e7fff window]
pnp 00:01: [mem 0x000e8000-0x000ebfff window]
pnp 00:01: [mem 0x000ec000-0x000effff window]
pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)

pnp 00:02: [io  0x0010-0x001f]
pnp 00:02: [io  0x0090-0x009f]
pnp 00:02: [io  0x0024-0x0025]
pnp 00:02: [io  0x0028-0x0029]
pnp 00:02: [io  0x002c-0x002d]
pnp 00:02: [io  0x0030-0x0031]
pnp 00:02: [io  0x0034-0x0035]
pnp 00:02: [io  0x0038-0x0039]
pnp 00:02: [io  0x003c-0x003d]
pnp 00:02: [io  0x00a4-0x00a5]
pnp 00:02: [io  0x00a8-0x00a9]
pnp 00:02: [io  0x00ac-0x00ad]
pnp 00:02: [io  0x00b0-0x00b5]
pnp 00:02: [io  0x00b8-0x00b9]
pnp 00:02: [io  0x00bc-0x00bd]
pnp 00:02: [io  0x0050-0x0053]
pnp 00:02: [io  0x0072-0x0077]
pnp 00:02: [io  0x0400-0x047f]
pnp 00:02: [io  0x0500-0x057f]
pnp 00:02: [io  0x0800-0x080f]
pnp 00:02: [io  0x15e0-0x15ef]
pnp 00:02: [io  0x1600-0x167f]

pnp 00:02: [mem 0xf8000000-0xfbffffff]
pnp 00:02: [mem 0x00000000-0x00000fff]
pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
pnp 00:02: [mem 0xfed10000-0xfed13fff]
pnp 00:02: [mem 0xfed18000-0xfed18fff]
pnp 00:02: [mem 0xfed19000-0xfed19fff]
pnp 00:02: [mem 0xfed45000-0xfed4bfff]

system 00:02: [io  0x0400-0x047f] has been reserved
system 00:02: [io  0x0500-0x057f] has been reserved
system 00:02: [io  0x0800-0x080f] has been reserved
system 00:02: [io  0x15e0-0x15ef] has been reserved
system 00:02: [io  0x1600-0x167f] has been reserved

system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved system 00:02: [mem 0x00000000-0x00000fff] could not be reserved system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff]
pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)

pnp 00:04: [io  0x0000-0x000f]
pnp 00:04: [io  0x0080-0x008f]
pnp 00:04: [io  0x00c0-0x00df]

pnp 00:04: [dma 4]
pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) pnp 00:06: [io 0x00f0]
pnp 00:06: [irq 13]
pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:07: [io 0x0070-0x0071]
pnp 00:07: [irq 8]
pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:08: [io 0x0060]
pnp 00:08: [io 0x0064]
pnp 00:08: [irq 1]
pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:09: [irq 12]
pnp 00:09: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) pnp 00:0a: [mem 0xfed40000-0xfed44fff]
pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
PCI: max bus depth: 1 pci_try_num: 2
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [mem 0xf1400000-0xf14fffff]
pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]

pci 0000:00:1c.4:   bridge window [io  0x3000-0x3fff]
pci 0000:00:1c.4:   bridge window [mem 0xf0c00000-0xf13fffff]
pci 0000:00:1c.4:   bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]

pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.4: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
pci_bus 0000:03: resource 1 [mem 0xf1400000-0xf14fffff]
pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0d: resource 1 [mem 0xf0c00000-0xf13fffff]
pci_bus 0000:0d: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800d6995000 - ffff8800da995000
software IO TLB at phys 0xd6995000 - 0xda995000
HugeTLB registered 2 MB page size, pre-allocated 0 pages
msgmni has been set to 15751
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (60 C)
ERST: Table is not found!
GHES: HEST is not enabled!
ACPI: Battery Slot [BAT0] (battery present)
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf1528000 port 0xf1528100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf1528000 port 0xf1528180 irq 40
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf152a000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.2.0-rc3-next-20111130 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf1529000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.2.0-rc3-next-20111130 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usblp
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Linux video capture interface: v2.00
device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: [email protected]
EDAC MC: Ver: 2.1.0
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 8)
sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sdhci-pci 0000:0d:00.0: setting latency timer to 64
Registered led device: mmc0::
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ALSA device list:
No soundcards found.
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
registered taskstats version 1
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: ATA-9: C300-CTFDDAC064MAG, 0006, max UDMA/100
ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA C300-CTFDDAC064M 0006 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 >
sd 0:0:0:0: [sda] Attached SCSI disk
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata2.00: ATA-8: SAMSUNG HN-M101MBB, 2AR10001, max UDMA/133
ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA SAMSUNG HN-M101M 2AR1 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.5: new high-speed USB device number 3 using ehci_hcd
usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 6 ports detected
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000
psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
usb 1-1.6: new high-speed USB device number 4 using ehci_hcd
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
md: Waiting for all devices to be available before autodetect
md: If you don't use raid, use raid=noautodetect
md: Autodetecting RAID arrays.
md: Scanned 0 and added 0 devices.
md: autorun ...
md: ... autorun DONE.
EXT3-fs (sda7): error: couldn't mount because of unsupported optional features (240)
EXT4-fs (sda7): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 8:7.
Freeing unused kernel memory: 616k freed
Refined TSC clocksource calibration: 2691.258 MHz.
Switching to clocksource tsc
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=b221
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Integrated Camera
usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
usb 2-1.4: new high-speed USB device number 3 using ehci_hcd
usb 2-1.4: New USB device found, idVendor=0bdb, idProduct=1911
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: F5521gw
usb 2-1.4: Manufacturer: Lenovo
usb 2-1.4: SerialNumber: F29C22F05C770D80
usb 1-1.5.3: new low-speed USB device number 5 using ehci_hcd
udevd[1423]: starting version 171
snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
snd_hda_intel 0000:00:1b.0: irq 41 for MSI/MSI-X
snd_hda_intel 0000:00:1b.0: setting latency timer to 64
e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
usb 1-1.5.3: New USB device found, idVendor=046d, idProduct=c050
usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5.3: Product: USB-PS/2 Optical Mouse
usb 1-1.5.3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input5 generic-usb 0003:046D:C050.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.5.3/input0 Linux agpgart interface v0.103
Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
Copyright(c) 2003-2011 Intel Corporation
iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlwifi 0000:03:00.0: setting latency timer to 64
iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005858000
iwlwifi 0000:03:00.0: HW Revision ID = 0x35
iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_SVTOOL disabled
iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6
iwlwifi 0000:03:00.0: Device SKU: 0X1f0
iwlwifi 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7
iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
Non-volatile memory driver v1.3
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 83ET64WW (1.34 ), EC unknown
thinkpad_acpi: Lenovo ThinkPad T420, model 4236NGG
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
Registered led device: tpacpi::thinklight
Registered led device: tpacpi::power
Registered led device: tpacpi::standby
Registered led device: tpacpi::thinkvantage
thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input7
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
usb 1-1.5.6: new full-speed USB device number 6 using ehci_hcd
iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
usb 1-1.5.6: New USB device found, idVendor=046d, idProduct=c318
usb 1-1.5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5.6: Product: Logitech Illuminated Keyboard
usb 1-1.5.6: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.0/input/input8 generic-usb 0003:046D:C318.0002: input: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1.5.6/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.1/input/input9 generic-usb 0003:046D:C318.0003: input: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1.5.6/input1 i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:21:cc:4a:33:5b
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 65536K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
mtrr: no more MTRRs available
[drm] MTRR allocation failed. Graphics performance may suffer.
i915 0000:00:02.0: irq 44 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 200x56
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:01: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input10
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
EXT4-fs (sda7): re-mounted. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:03:00.0: Radio type=0x0-0x3-0x1
Adding 4000148k swap on /dev/sda5. Priority:-1 extents:1 across:4000148k SS
wlan0: authenticate with bc:05:43:42:6f:aa (try 1)
wlan0: authenticated
wlan0: associate with bc:05:43:42:6f:aa (try 1)
wlan0: RX AssocResp from bc:05:43:42:6f:aa (capab=0x431 status=0 aid=1)
wlan0: associated
start_kdeinit (3544): /proc/3544/oom_adj is deprecated, please use /proc/3544/oom_score_adj instead.
usb 1-1.5: USB disconnect, device number 3
usb 1-1.5.3: USB disconnect, device number 5
usb 1-1.5.6: USB disconnect, device number 6
thinkpad_acpi: unknown possible thermal alarm or keyboard event received
thinkpad_acpi: unhandled HKEY event 0x6040
thinkpad_acpi: please report the conditions when this event happened to [email protected]
e1000e: eth0 NIC Link is Down
thinkpad_acpi: undocked from hotplug port replicator
CPU1: Package power limit notification (total events = 1)
CPU0: Package power limit notification (total events = 1)
CPU0: Package power limit normal
CPU1: Package power limit normal
thinkpad_acpi: docked into hotplug port replicator
usb 1-1.5: new high-speed USB device number 7 using ehci_hcd
usb 1-1.5: New USB device found, idVendor=17ef, idProduct=100a
usb 1-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1.5:1.0: USB hub found
hub 1-1.5:1.0: 6 ports detected
usb 1-1.5.3: new low-speed USB device number 8 using ehci_hcd
usb 1-1.5.3: New USB device found, idVendor=046d, idProduct=c050
usb 1-1.5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5.3: Product: USB-PS/2 Optical Mouse
usb 1-1.5.3: Manufacturer: Logitech
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.3/1-1.5.3:1.0/input/input11 generic-usb 0003:046D:C050.0004: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.5.3/input0 usb 1-1.5.6: new full-speed USB device number 9 using ehci_hcd
usb 1-1.5.6: New USB device found, idVendor=046d, idProduct=c318
usb 1-1.5.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5.6: Product: Logitech Illuminated Keyboard
usb 1-1.5.6: Manufacturer: Logitech
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.0/input/input12 generic-usb 0003:046D:C318.0005: input: USB HID v1.11 Keyboard [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1.5.6/input0
input: Logitech Logitech Illuminated Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5.6/1-1.5.6:1.1/input/input13 generic-usb 0003:046D:C318.0006: input: USB HID v1.11 Device [Logitech Logitech Illuminated Keyboard] on usb-0000:00:1a.0-1.5.6/input1
thinkpad_acpi: unknown possible thermal alarm or keyboard event received
thinkpad_acpi: unhandled HKEY event 0x6040
thinkpad_acpi: please report the conditions when this event happened to [email protected]
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[Hardware Error]: Machine check events logged
CPU1: Package power limit notification (total events = 9)
CPU0: Package power limit notification (total events = 9)
CPU1: Package power limit normal
CPU0: Package power limit normal
[Hardware Error]: Machine check events logged