bonding/main: fix NULL dereference in bond_select_active_slave()
Subsystems (3)
PATCH 1/1 bonding/main: fix NULL dereference in bond_select_active_slave()
A bonding master can be up while best_slave is NULL.
[12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60
--- drivers/net/bonding/bond_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/net/bonding/bond_main.c +1 -1
@@ -937,7 +937,7 @@ void bond_select_active_slave(struct bonding *bond)return ;if (netif_carrier_ok (bond->dev)) -slave_info (bond->dev, best_slave->dev,"active interface up!\n" ); +netdev_info (bond->dev,"active interface up!\n" );else netdev_info (bond->dev,"now running without any active interface!\n" ); }
Signature · 1 line
2.22.0.410.gd8fdbe21b5-goog
Quoted 48 lines · Eric Dumazet
A bonding master can be up while
best_slaveis NULL.[12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60Fixes e2a7420df2e0 ("bonding/main: convert to using slave printk macros")Signed-off-by Eric Dumazet <[email protected]>Reported-by John Sperbeck <[email protected]>Cc Jarod Wilson <[email protected]>CC Jay Vosburgh <[email protected]>CC Veaceslav Falico <[email protected]>CC Andy Gospodarek <[email protected]>---
drivers/net/bonding/bond_main.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)drivers/net/bonding/bond_main.c +0
-0
drivers/net/bonding/bond_main.c void bond_select_active_slave(struct bonding *bond) · line 943
Quoted 8 lines
drivers/net/bonding/bond_main.c +1
-1@@ -937,7 +937,7 @@ void bond_select_active_slave(struct bonding *bond)return ;if (netif_carrier_ok (bond->dev)) -slave_info (bond->dev, best_slave->dev,"active interface up!\n" ); +netdev_info (bond->dev,"active interface up!\n" );else netdev_info (bond->dev,"now running without any active interface!\n" ); }
What is the bonding mode and options in the failure case?
I see that the fix is fine in the sense that it returns to the
original status quo for the message.
However, the code path seems odd; if best_slave is NULL, that
means that bond_find_best_slave() saw all slaves as down, but if netif_carrier_ok is true, then bond_set_carrier() did not.
-J
---
-Jay Vosburgh, [email protected]
Quoted 53 lines · Jay Vosburgh
Quoted 50 lines · Eric Dumazet
A bonding master can be up while
best_slaveis NULL.[12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 [12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1 [12105.648984] IP: bond_select_active_slave+0x125/0x250 [12105.653977] PGD 0 P4D 0 [12105.656572] Oops: 0000 [#1] SMP PTI [12105.660487] gsmi: Log Shutdown Reason 0x03 [12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel] [12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2 [12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1 [12105.685700] mlx4_en: eth2: Link Up (linkstate) [12105.724452] Workqueue: bond0 bond_mii_monitor [12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250 [12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246 [12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000 [12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000 [12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600 [12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000 [12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000 [12105.775748] FS: 0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000 [12105.783892] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0 [12105.796976] Call Trace: [12105.799446] [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0 [12105.805317] [<ffffffffabd42643>] process_one_work+0x143/0x370 [12105.811225] [<ffffffffabd42c7a>] worker_thread+0x4a/0x360 [12105.816761] [<ffffffffabd48bc5>] kthread+0x105/0x140 [12105.821865] [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380 [12105.827757] [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0 [12105.834266] [<ffffffffac600241>] ret_from_fork+0x51/0x60Fixes e2a7420df2e0 ("bonding/main: convert to using slave printk macros")Signed-off-by Eric Dumazet <[email protected]>Reported-by John Sperbeck <[email protected]>Cc Jarod Wilson <[email protected]>CC Jay Vosburgh <[email protected]>CC Veaceslav Falico <[email protected]>CC Andy Gospodarek <[email protected]>---
drivers/net/bonding/bond_main.c| 2 +-1 file changed, 1 insertion(+), 1 deletion(-)drivers/net/bonding/bond_main.c +0
-0@@ -937,7 +937,7 @@ void bond_select_active_slave(struct bonding *bond)return ;
Quoted 8 lines
drivers/net/bonding/bond_main.c void bond_select_active_slave(struct bonding *bond) · line 943
Quoted 6 lines
drivers/net/bonding/bond_main.c +1
-1if (netif_carrier_ok (bond->dev)) -slave_info (bond->dev, best_slave->dev,"active interface up!\n" ); +netdev_info (bond->dev,"active interface up!\n" );else netdev_info (bond->dev,"now running without any active interface!\n" ); }What is the bonding mode and options in the failure case?
I am not sure.
Basically I only have crash dumps at this point (no idea how to repro the bug)
I guess that is :
Bonding Mode: IEEE 802.3ad Dynamic link aggregation Transmit Hash Policy: encap3+4 (4)
Use Carrier: 1
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
MAC address: 00:1a:11:c0:65:40
Active Members: eth1 eth2
Quoted 7 lines
I see that the fix is fine in the sense that it returns to the
original status quo for the message.However, the code path seems odd; if
best_slaveis NULL, that
means thatbond_find_best_slave()saw all slaves as down, but ifnetif_carrier_okis true, thenbond_set_carrier()did not.
From: Eric Dumazet <[email protected]>
Date: Mon, 1 Jul 2019 10:48:51 -0700
Quoted 1 line
A bonding master can be up while
best_slaveis NULL.
...
Quoted 3 lines
Fixes e2a7420df2e0 ("bonding/main: convert to using slave printk macros")Signed-off-by Eric Dumazet <[email protected]>Reported-by John Sperbeck <[email protected]>
Applied, thanks.