Skip to contentSkip to conversation

i2c: busses: Use devm_clk_get_enabled()

PATCH Applied Andi Shyti 11 participants 46 messages Jun 11, 2023 – Oct 23, 2023

Subsystems (17)
lore
Share & tools
lore

Andi Shyti

author maintainer
#0 lore raw

cover i2c: busses: Use devm_clk_get_enabled()

Hi,

After having sent some cleanups for using devm_clk_get_enabled(), I decided to expand a bit to some of the i2c drivers.

Andi

Andi Shyti (15):
i2c: busses: emev2: Use devm_clk_get_enabled()
i2c: busses: xiic: Use devm_clk_get_enabled()
i2c: busses: at91-core: Use devm_clk_get_enabled()
i2c: busses: exynos5: Use devm_clk_get_enabled()
i2c: busses: hix5hd2: Use devm_clk_get_enabled()
i2c: busses: jz4780: Use devm_clk_get_enabled()
i2c: busses: lpc2k: Use devm_clk_get_enabled()
i2c: busses: mt7621: Use devm_clk_get_enabled()
i2c: busses: owl: Use devm_clk_get_enabled()
i2c: busses: pasemi-platform: Use devm_clk_get_enabled()
i2c: busses: stm32f4: Use devm_clk_get_enabled()
i2c: busses: stm32f7: Use devm_clk_get_enabled()
i2c: busses: sun6i-p2wi: Use devm_clk_get_enabled()
i2c: busses: uniphier-f: Use devm_clk_get_enabled()
i2c: busses: uniphier: Use devm_clk_get_enabled()

 drivers/i2c/busses/i2c-at91-core.c       |  8 ++---
 drivers/i2c/busses/i2c-emev2.c           | 17 +++------
 drivers/i2c/busses/i2c-exynos5.c         | 44 +++++++-----------------
 drivers/i2c/busses/i2c-hix5hd2.c         | 11 +++---
 drivers/i2c/busses/i2c-jz4780.c          | 25 ++++----------
 drivers/i2c/busses/i2c-lpc2k.c           | 22 +++---------
 drivers/i2c/busses/i2c-mt7621.c          | 20 +++--------
 drivers/i2c/busses/i2c-owl.c             | 18 +++-------
 drivers/i2c/busses/i2c-pasemi-platform.c | 22 +++---------
 drivers/i2c/busses/i2c-stm32f4.c         | 32 ++++++-----------
 drivers/i2c/busses/i2c-stm32f7.c         | 37 +++++++-------------
 drivers/i2c/busses/i2c-sun6i-p2wi.c      | 17 ++-------
 drivers/i2c/busses/i2c-uniphier-f.c      | 21 +++--------
 drivers/i2c/busses/i2c-uniphier.c        | 21 +++--------
 drivers/i2c/busses/i2c-xiic.c            | 20 ++++-------
 15 files changed, 87 insertions(+), 248 deletions(-)
Signature · 1 line
2.40.1
author maintainer
#1 lore raw

PATCH 1/15 i2c: busses: emev2: Use devm_clk_get_enabled()

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Wolfram Sang <[email protected]>
Cc Geert Uytterhoeven <[email protected]>
Cc Magnus Damm <[email protected]>
---
 drivers/i2c/busses/i2c-emev2.c | 17 ++++-------------
 1 file changed, 4 insertions(+), 13 deletions(-)
drivers/i2c/busses/i2c-emev2.c +4 -13
index 4ba93cd91c0f0..d080b829f142b 100644
@@ -373,14 +373,10 @@ static int em_i2c_probe(struct platform_device *pdev)
 
 	strscpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
 
-	priv->sclk = devm_clk_get(&pdev->dev, "sclk");
+	priv->sclk = devm_clk_get_enabled(&pdev->dev, "sclk");
 	if (IS_ERR(priv->sclk))
 		return PTR_ERR(priv->sclk);
 
-	ret = clk_prepare_enable(priv->sclk);
-	if (ret)
-		return ret;
-
 	priv->adap.timeout = msecs_to_jiffies(100);
 	priv->adap.retries = 5;
 	priv->adap.dev.parent = &pdev->dev;
@@ -397,26 +393,22 @@ static int em_i2c_probe(struct platform_device *pdev)
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err_clk;
+		return ret;
 	priv->irq = ret;
 	ret = devm_request_irq(&pdev->dev, priv->irq, em_i2c_irq_handler, 0,
 				"em_i2c", priv);
 	if (ret)
-		goto err_clk;
+		return ret;
 
 	ret = i2c_add_adapter(&priv->adap);
 
 	if (ret)
-		goto err_clk;
+		return ret;
 
 	dev_info(&pdev->dev, "Added i2c controller %d, irq %d\n", priv->adap.nr,
 		 priv->irq);
 
 	return 0;
-
-err_clk:
-	clk_disable_unprepare(priv->sclk);
-	return ret;
 }
 
 static void em_i2c_remove(struct platform_device *dev)
@@ -424,7 +416,6 @@ static void em_i2c_remove(struct platform_device *dev)
 	struct em_i2c_device *priv = platform_get_drvdata(dev);
 
 	i2c_del_adapter(&priv->adap);
-	clk_disable_unprepare(priv->sclk);
 }
 
 static const struct of_device_id em_i2c_ids[] = {
Signature · 1 line
2.40.1
#2 lore raw

Re: [PATCH 01/15] i2c: busses: emev2: Use devm_clk_get_enabled()

Hi Andi,

Quoted 8 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Wolfram Sang <[email protected]>
Cc Geert Uytterhoeven <[email protected]>
Cc Magnus Damm <[email protected]>

Thanks for your patch!

drivers/i2c/busses/i2c-emev2.c static int em_i2c_probe(struct platform_device *pdev) · line 378

Quoted 10 lines
drivers/i2c/busses/i2c-emev2.c +1 -1
@@ -373,14 +373,10 @@ static int em_i2c_probe(struct platform_device *pdev)
 
        strscpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
 
-       priv->sclk = devm_clk_get(&pdev->dev, "sclk");
+       priv->sclk = devm_clk_get_enabled(&pdev->dev, "sclk");
        if (IS_ERR(priv->sclk))
                return PTR_ERR(priv->sclk);

After this, priv->sclk is unused, so you can replace em_i2c_device.sclk by a local variable.

The rest LGTM.

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
author maintainer
#3 lore raw

Re: [PATCH 01/15] i2c: busses: emev2: Use devm_clk_get_enabled()

Hi Geert,

Quoted 6 lines
Quoted 6 lines
drivers/i2c/busses/i2c-emev2.c +0 -0
@@ -373,14 +373,10 @@ static int em_i2c_probe(struct platform_device *pdev)
 
        strscpy(priv->adap.name, "EMEV2 I2C", sizeof(priv->adap.name));
 
Quoted 7 lines

drivers/i2c/busses/i2c-emev2.c static int em_i2c_probe(struct platform_device *pdev) · line 378

Quoted 4 lines
drivers/i2c/busses/i2c-emev2.c +1 -1
-       priv->sclk = devm_clk_get(&pdev->dev, "sclk");
+       priv->sclk = devm_clk_get_enabled(&pdev->dev, "sclk");
        if (IS_ERR(priv->sclk))
                return PTR_ERR(priv->sclk);

After this, priv->sclk is unused, so you can replace em_i2c_device.sclk by a local variable.

good point! Will send it again. Thanks!

Andi

author maintainer
#4 lore raw

PATCH 2/15 i2c: busses: xiic: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

---
 drivers/i2c/busses/i2c-xiic.c | 20 +++++++-------------
 1 file changed, 7 insertions(+), 13 deletions(-)
drivers/i2c/busses/i2c-xiic.c +7 -13
index 61288f8dd0672..f879af4def5ed 100644
@@ -1256,16 +1256,11 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	mutex_init(&i2c->lock);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
-				     "input clock not found.\n");
+				     "failed to enable input clock.\n");
 
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock.\n");
-		return ret;
-	}
 	i2c->dev = &pdev->dev;
 	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
 	pm_runtime_use_autosuspend(i2c->dev);
@@ -1286,7 +1281,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-		goto err_clk_dis;
+		goto err_pm_disable;
 	}
 
 	i2c->singlemaster =
@@ -1307,14 +1302,14 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	ret = xiic_reinit(i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "Cannot xiic_reinit\n");
-		goto err_clk_dis;
+		goto err_pm_disable;
 	}
 
 	/* add i2c adapter to i2c tree */
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret) {
 		xiic_deinit(i2c);
-		goto err_clk_dis;
+		goto err_pm_disable;
 	}
 
 	if (pdata) {
@@ -1328,10 +1323,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
 	return 0;
 
-err_clk_dis:
+err_pm_disable:
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
-	clk_disable_unprepare(i2c->clk);
+
 	return ret;
 }
 
@@ -1352,7 +1347,6 @@ static void xiic_i2c_remove(struct platform_device *pdev)
 		xiic_deinit(i2c);
 
 	pm_runtime_put_sync(i2c->dev);
-	clk_disable_unprepare(i2c->clk);
 	pm_runtime_disable(&pdev->dev);
 	pm_runtime_set_suspended(&pdev->dev);
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
Signature · 1 line
2.40.1
maintainer Acked-by on v1 2/15
#5 lore raw

Re: [PATCH 02/15] i2c: busses: xiic: Use devm_clk_get_enabled()

Quoted 73 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

---
  drivers/i2c/busses/i2c-xiic.c | 20 +++++++-------------
  1 file changed, 7 insertions(+), 13 deletions(-)
drivers/i2c/busses/i2c-xiic.c +7 -12
index 61288f8dd0672..f879af4def5ed 100644
@@ -1256,16 +1256,11 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
  	mutex_init(&i2c->lock);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
  	if (IS_ERR(i2c->clk))
  		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
-				     "input clock not found.\n");
+				     "failed to enable input clock.\n");
 
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock.\n");
-		return ret;
-	}
  	i2c->dev = &pdev->dev;
  	pm_runtime_set_autosuspend_delay(i2c->dev, XIIC_PM_TIMEOUT);
  	pm_runtime_use_autosuspend(i2c->dev);
@@ -1286,7 +1281,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
  	if (ret < 0) {
  		dev_err(&pdev->dev, "Cannot claim IRQ\n");
-		goto err_clk_dis;
+		goto err_pm_disable;
  	}
 
  	i2c->singlemaster =
@@ -1307,14 +1302,14 @@ static int xiic_i2c_probe(struct platform_device *pdev)
  	ret = xiic_reinit(i2c);
  	if (ret < 0) {
  		dev_err(&pdev->dev, "Cannot xiic_reinit\n");
-		goto err_clk_dis;
+		goto err_pm_disable;
  	}
 
  	/* add i2c adapter to i2c tree */
  	ret = i2c_add_adapter(&i2c->adap);
  	if (ret) {
  		xiic_deinit(i2c);
-		goto err_clk_dis;
+		goto err_pm_disable;
  	}
 
  	if (pdata) {
@@ -1328,10 +1323,10 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 
  	return 0;
 
-err_clk_dis:
+err_pm_disable:
  	pm_runtime_set_suspended(&pdev->dev);
  	pm_runtime_disable(&pdev->dev);
-	clk_disable_unprepare(i2c->clk);
+
  	return ret;
  }
 

drivers/i2c/busses/i2c-xiic.c static void xiic_i2c_remove(struct platform_device *pdev) · line 1352

Quoted 7 lines
drivers/i2c/busses/i2c-xiic.c +0 -1
@@ -1352,7 +1347,6 @@ static void xiic_i2c_remove(struct platform_device *pdev)
  		xiic_deinit(i2c);
 
  	pm_runtime_put_sync(i2c->dev);
-	clk_disable_unprepare(i2c->clk);
  	pm_runtime_disable(&pdev->dev);
  	pm_runtime_set_suspended(&pdev->dev);
  	pm_runtime_dont_use_autosuspend(&pdev->dev);

Thanks,
Michal

Applied
#6 lore raw

Re: [PATCH 02/15] i2c: busses: xiic: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 6 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Applied to for-next, thanks! No need for 'busses' in $subject, tough. I removed it while applying.

author maintainer
#7 lore raw

PATCH 3/15 i2c: busses: at91-core: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Codrin Ciubotariu <[email protected]>
Cc Nicolas Ferre <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Claudiu Beznea <[email protected]>
---
 drivers/i2c/busses/i2c-at91-core.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-at91-core.c +2 -6
index 05ad3bc3578ac..2251e0deed29c 100644
@@ -226,12 +226,11 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, dev);
 
-	dev->clk = devm_clk_get(dev->dev, NULL);
+	dev->clk = devm_clk_get_enabled(dev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
-		dev_err(dev->dev, "no clock defined\n");
+		dev_err(dev->dev, "failed to enable clock\n");
 		return -ENODEV;
 	}
-	clk_prepare_enable(dev->clk);
 
 	snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
 	i2c_set_adapdata(&dev->adapter, dev);
@@ -260,8 +259,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 
 	rc = i2c_add_numbered_adapter(&dev->adapter);
 	if (rc) {
-		clk_disable_unprepare(dev->clk);
-
 		pm_runtime_disable(dev->dev);
 		pm_runtime_set_suspended(dev->dev);
 
@@ -278,7 +275,6 @@ static void at91_twi_remove(struct platform_device *pdev)
 	struct at91_twi_dev *dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&dev->adapter);
-	clk_disable_unprepare(dev->clk);
 
 	pm_runtime_disable(dev->dev);
 	pm_runtime_set_suspended(dev->dev);
Signature · 1 line
2.40.1
#8 lore raw

Re: [PATCH 03/15] i2c: busses: at91-core: Use devm_clk_get_enabled()

Quoted 9 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Codrin Ciubotariu <[email protected]>
Cc Nicolas Ferre <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Claudiu Beznea <[email protected]>

Nicolas, did you find a new maintainer for this driver?

maintainer
#9 lore raw

Re: [PATCH 03/15] i2c: busses: at91-core: Use devm_clk_get_enabled()

Wolfram,

Quoted 6 lines · Wolfram Sang
Quoted 4 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Quoted 6 lines
Quoted 5 lines
Cc Codrin Ciubotariu<[email protected]>
Cc Nicolas Ferre<[email protected]>
Cc Alexandre Belloni<[email protected]>
Cc Claudiu Beznea<[email protected]>

Nicolas, did you find a new maintainer for this driver?

You can contact Durai in "to" of this email. I can have a look if needed as well. Thanks for the heads-up!

Best regards,
Nicolas

Signature · 1 line
Nicolas Ferre
maintainer Acked-by on v1 3/15
#10 lore raw

Re: [PATCH 03/15] i2c: busses: at91-core: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 7 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Codrin Ciubotariu <[email protected]>
Cc Nicolas Ferre <[email protected]>

Looks good to me:

Best regards,
Nicolas

Quoted 45 lines
Cc Alexandre Belloni <[email protected]>
Cc Claudiu Beznea <[email protected]>
---
  drivers/i2c/busses/i2c-at91-core.c | 8 ++------
  1 file changed, 2 insertions(+), 6 deletions(-)
drivers/i2c/busses/i2c-at91-core.c +2 -7
index 05ad3bc3578ac..2251e0deed29c 100644
@@ -226,12 +226,11 @@ static int at91_twi_probe(struct platform_device *pdev)
 
         platform_set_drvdata(pdev, dev);
 
-       dev->clk = devm_clk_get(dev->dev, NULL);
+       dev->clk = devm_clk_get_enabled(dev->dev, NULL);
         if (IS_ERR(dev->clk)) {
-               dev_err(dev->dev, "no clock defined\n");
+               dev_err(dev->dev, "failed to enable clock\n");
                 return -ENODEV;
         }
-       clk_prepare_enable(dev->clk);
 
         snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
         i2c_set_adapdata(&dev->adapter, dev);
@@ -260,8 +259,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 
         rc = i2c_add_numbered_adapter(&dev->adapter);
         if (rc) {
-               clk_disable_unprepare(dev->clk);
-
                 pm_runtime_disable(dev->dev);
                 pm_runtime_set_suspended(dev->dev);
 
@@ -278,7 +275,6 @@ static void at91_twi_remove(struct platform_device *pdev)
         struct at91_twi_dev *dev = platform_get_drvdata(pdev);
 
         i2c_del_adapter(&dev->adapter);
-       clk_disable_unprepare(dev->clk);
 
         pm_runtime_disable(dev->dev);
         pm_runtime_set_suspended(dev->dev);
--

2.40.1

Signature · 1 line
Nicolas Ferre
Applied
#11 lore raw

Re: [PATCH 03/15] i2c: busses: at91-core: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 9 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Codrin Ciubotariu <[email protected]>
Cc Nicolas Ferre <[email protected]>
Cc Alexandre Belloni <[email protected]>
Cc Claudiu Beznea <[email protected]>

Applied to for-next, thanks!

author maintainer
#12 lore raw

PATCH 4/15 i2c: busses: exynos5: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Krzysztof Kozlowski <[email protected]>
Cc Alim Akhtar <[email protected]>
---
 drivers/i2c/busses/i2c-exynos5.c | 44 +++++++++-----------------------
 1 file changed, 12 insertions(+), 32 deletions(-)
drivers/i2c/busses/i2c-exynos5.c +12 -32
index f378cd479e558..6f76d0027aeae 100644
@@ -808,30 +808,20 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	i2c->adap.retries = 3;
 
 	i2c->dev = &pdev->dev;
-	i2c->clk = devm_clk_get(&pdev->dev, "hsi2c");
-	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "cannot get clock\n");
-		return -ENOENT;
-	}
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, "hsi2c");
+	if (IS_ERR(i2c->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->clk),
+				     "cannot enable clock\n");
 
-	i2c->pclk = devm_clk_get_optional(&pdev->dev, "hsi2c_pclk");
-	if (IS_ERR(i2c->pclk)) {
+	i2c->pclk = devm_clk_get_optional_enabled(&pdev->dev, "hsi2c_pclk");
+	if (IS_ERR(i2c->pclk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c->pclk),
-				     "cannot get pclk");
-	}
-
-	ret = clk_prepare_enable(i2c->pclk);
-	if (ret)
-		return ret;
-
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret)
-		goto err_pclk;
+				     "cannot enable pclk");
 
 	i2c->regs = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(i2c->regs)) {
 		ret = PTR_ERR(i2c->regs);
-		goto err_clk;
+		return ret;
 	}
 
 	i2c->adap.dev.of_node = np;
@@ -846,26 +836,26 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 
 	i2c->irq = ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err_clk;
+		return ret;
 
 	ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
 			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), i2c);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
-		goto err_clk;
+		return ret;
 	}
 
 	i2c->variant = of_device_get_match_data(&pdev->dev);
 
 	ret = exynos5_hsi2c_clock_setup(i2c);
 	if (ret)
-		goto err_clk;
+		return ret;
 
 	exynos5_i2c_reset(i2c);
 
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0)
-		goto err_clk;
+		return ret;
 
 	platform_set_drvdata(pdev, i2c);
 
@@ -873,13 +863,6 @@ static int exynos5_i2c_probe(struct platform_device *pdev)
 	clk_disable(i2c->pclk);
 
 	return 0;
-
- err_clk:
-	clk_disable_unprepare(i2c->clk);
-
- err_pclk:
-	clk_disable_unprepare(i2c->pclk);
-	return ret;
 }
 
 static void exynos5_i2c_remove(struct platform_device *pdev)
@@ -887,9 +870,6 @@ static void exynos5_i2c_remove(struct platform_device *pdev)
 	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c->adap);
-
-	clk_unprepare(i2c->clk);
-	clk_unprepare(i2c->pclk);
 }
 
 #ifdef CONFIG_PM_SLEEP
Signature · 1 line
2.40.1
#13 lore raw

Re: [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()

drivers/i2c/busses/i2c-exynos5.c static void exynos5_i2c_remove(struct platform_device *pdev) · line 892

Quoted 3 lines
drivers/i2c/busses/i2c-exynos5.c +0 -2
-	clk_unprepare(i2c->clk);
-	clk_unprepare(i2c->pclk);

Are you sure we can use devm_clk_get_enabled() here which calls clk_disable_unprepare() on remove and not clk_unprepare()?

author maintainer
#14 lore raw

Re: [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()

Quoted 6 lines · Wolfram Sang

drivers/i2c/busses/i2c-exynos5.c static void exynos5_i2c_remove(struct platform_device *pdev) · line 892

Quoted 3 lines
drivers/i2c/busses/i2c-exynos5.c +0 -2
-	clk_unprepare(i2c->clk);
-	clk_unprepare(i2c->pclk);

Are you sure we can use devm_clk_get_enabled() here which calls clk_disable_unprepare() on remove and not clk_unprepare()?

Unless I am missing something, I think so. This is what the driver does, gets the clock and enables it.

I don't know why there is just unprepare() and not disable_unprepare() in this function.

I think the patch is correct, maybe Krzysztof and Alim might spot something that I have missed.

Thanks,
Andi

#15 lore raw

Re: [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()

Quoted 8 lines · Andi Shyti
Quoted 6 lines · Wolfram Sang

drivers/i2c/busses/i2c-exynos5.c static void exynos5_i2c_remove(struct platform_device *pdev) · line 892

Quoted 3 lines
drivers/i2c/busses/i2c-exynos5.c +0 -2
-	clk_unprepare(i2c->clk);
-	clk_unprepare(i2c->pclk);

Are you sure we can use devm_clk_get_enabled() here which calls clk_disable_unprepare() on remove and not clk_unprepare()?

Quoted 5 lines

Unless I am missing something, I think so. This is what the driver does, gets the clock and enables it.

I don't know why there is just unprepare() and not disable_unprepare() in this function.

Your code is not equivalent and does not explain why. Pure devm_clk_get_enabled() conversion should be equivalent.

If original code was correct, your patch will cause double clk disable. If original code was not correct, your patch silently fixes it without explaining that there was a bug.

Did you test the patch, including the unbind path?

Best regards,
Krzysztof

author maintainer
#16 lore raw

Re: [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()

Hi Krzysztof,

Quoted 15 lines · Krzysztof Kozlowski
Quoted 8 lines · Andi Shyti
Quoted 6 lines · Wolfram Sang

drivers/i2c/busses/i2c-exynos5.c static void exynos5_i2c_remove(struct platform_device *pdev) · line 892

Quoted 3 lines
drivers/i2c/busses/i2c-exynos5.c +0 -2
-	clk_unprepare(i2c->clk);
-	clk_unprepare(i2c->pclk);

Are you sure we can use devm_clk_get_enabled() here which calls clk_disable_unprepare() on remove and not clk_unprepare()?

Quoted 5 lines

Unless I am missing something, I think so. This is what the driver does, gets the clock and enables it.

I don't know why there is just unprepare() and not disable_unprepare() in this function.

Quoted 8 lines

Your code is not equivalent and does not explain why. Pure devm_clk_get_enabled() conversion should be equivalent.

If original code was correct, your patch will cause double clk disable. If original code was not correct, your patch silently fixes it without explaining that there was a bug.

Did you test the patch, including the unbind path?

you are right! My code, indeed, doesn't do a 1to1 conversion.

Will prepare it again, maybe in two patches, one for the conversion and one for clearing the removal path.

Thanks for dropping in,
Andi

#17 lore raw

Re: [PATCH 04/15] i2c: busses: exynos5: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 3 lines

I don't know why there is just unprepare() and not disable_unprepare() in this function.

To save power, some drivers disable the clock by default (after some init in probe) and only enable it when a transaction is on-going. If they do everything right(tm), they may only need to unprepare the clock in remove. I don't know the details about the exynos driver, though.

author maintainer
#18 lore raw

PATCH 5/15 i2c: busses: hix5hd2: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

---
 drivers/i2c/busses/i2c-hix5hd2.c | 11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)
drivers/i2c/busses/i2c-hix5hd2.c +4 -7
index 64feaa9dca619..aecbe967e2640 100644
@@ -416,12 +416,11 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	priv->clk = devm_clk_get(&pdev->dev, NULL);
+	priv->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(priv->clk)) {
-		dev_err(&pdev->dev, "cannot get clock\n");
+		dev_err(&pdev->dev, "cannot enable clock\n");
 		return PTR_ERR(priv->clk);
 	}
-	clk_prepare_enable(priv->clk);
 
 	strscpy(priv->adap.name, "hix5hd2-i2c", sizeof(priv->adap.name));
 	priv->dev = &pdev->dev;
@@ -442,7 +441,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 			       IRQF_NO_SUSPEND, dev_name(&pdev->dev), priv);
 	if (ret != 0) {
 		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", irq);
-		goto err_clk;
+		return ret;
 	}
 
 	pm_runtime_set_autosuspend_delay(priv->dev, MSEC_PER_SEC);
@@ -459,8 +458,7 @@ static int hix5hd2_i2c_probe(struct platform_device *pdev)
 err_runtime:
 	pm_runtime_disable(priv->dev);
 	pm_runtime_set_suspended(priv->dev);
-err_clk:
-	clk_disable_unprepare(priv->clk);
+
 	return ret;
 }
 
@@ -471,7 +469,6 @@ static void hix5hd2_i2c_remove(struct platform_device *pdev)
 	i2c_del_adapter(&priv->adap);
 	pm_runtime_disable(priv->dev);
 	pm_runtime_set_suspended(priv->dev);
-	clk_disable_unprepare(priv->clk);
 }
 
 #ifdef CONFIG_PM
Signature · 1 line
2.40.1
Applied
#19 lore raw

Re: [PATCH 05/15] i2c: busses: hix5hd2: Use devm_clk_get_enabled()

Quoted 5 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Applied to for-next, thanks!

author maintainer
#20 lore raw

PATCH 6/15 i2c: busses: jz4780: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Cc Paul Cercueil <[email protected]>
---
 drivers/i2c/busses/i2c-jz4780.c | 25 ++++++-------------------
 1 file changed, 6 insertions(+), 19 deletions(-)
drivers/i2c/busses/i2c-jz4780.c +6 -19
index 0dfe603995214..7f21611ca3262 100644
@@ -792,26 +792,21 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, i2c);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk))
 		return PTR_ERR(i2c->clk);
 
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret)
-		return ret;
-
 	ret = of_property_read_u32(pdev->dev.of_node, "clock-frequency",
 				   &clk_freq);
 	if (ret) {
 		dev_err(&pdev->dev, "clock-frequency not specified in DT\n");
-		goto err;
+		return ret;
 	}
 
 	i2c->speed = clk_freq / 1000;
 	if (i2c->speed == 0) {
-		ret = -EINVAL;
 		dev_err(&pdev->dev, "clock-frequency minimum is 1000\n");
-		goto err;
+		return -EINVAL;
 	}
 	jz4780_i2c_set_speed(i2c);
 
@@ -827,22 +822,14 @@ static int jz4780_i2c_probe(struct platform_device *pdev)
 
 	ret = platform_get_irq(pdev, 0);
 	if (ret < 0)
-		goto err;
+		return ret;
 	i2c->irq = ret;
 	ret = devm_request_irq(&pdev->dev, i2c->irq, jz4780_i2c_irq, 0,
 			       dev_name(&pdev->dev), i2c);
 	if (ret)
-		goto err;
-
-	ret = i2c_add_adapter(&i2c->adap);
-	if (ret < 0)
-		goto err;
-
-	return 0;
+		return ret;
 
-err:
-	clk_disable_unprepare(i2c->clk);
-	return ret;
+	return i2c_add_adapter(&i2c->adap);
 }
 
 static void jz4780_i2c_remove(struct platform_device *pdev)
Signature · 1 line
2.40.1
#21 lore raw

Re: [PATCH 06/15] i2c: busses: jz4780: Use devm_clk_get_enabled()

Quoted 2 lines

static void jz4780_i2c_remove(struct platform_device *pdev)

You did not update the remove function.

author maintainer
#22 lore raw

PATCH 7/15 i2c: busses: lpc2k: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Cc Vladimir Zapolskiy <[email protected]>
---
 drivers/i2c/busses/i2c-lpc2k.c | 22 +++++-----------------
 1 file changed, 5 insertions(+), 17 deletions(-)
drivers/i2c/busses/i2c-lpc2k.c +5 -17
index 469fe907723e8..5c6d965547539 100644
@@ -365,23 +365,17 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 
 	init_waitqueue_head(&i2c->wait);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "error getting clock\n");
+		dev_err(&pdev->dev, "failed to enable clock.\n");
 		return PTR_ERR(i2c->clk);
 	}
 
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "unable to enable clock.\n");
-		return ret;
-	}
-
 	ret = devm_request_irq(&pdev->dev, i2c->irq, i2c_lpc2k_handler, 0,
 			       dev_name(&pdev->dev), i2c);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "can't request interrupt.\n");
-		goto fail_clk;
+		return ret;
 	}
 
 	disable_irq_nosync(i2c->irq);
@@ -397,8 +391,7 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 	clkrate = clk_get_rate(i2c->clk);
 	if (clkrate == 0) {
 		dev_err(&pdev->dev, "can't get I2C base clock\n");
-		ret = -EINVAL;
-		goto fail_clk;
+		return -EINVAL;
 	}
 
 	/* Setup I2C dividers to generate clock with proper duty cycle */
@@ -424,15 +417,11 @@ static int i2c_lpc2k_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&i2c->adap);
 	if (ret < 0)
-		goto fail_clk;
+		return ret;
 
 	dev_info(&pdev->dev, "LPC2K I2C adapter\n");
 
 	return 0;
-
-fail_clk:
-	clk_disable_unprepare(i2c->clk);
-	return ret;
 }
 
 static void i2c_lpc2k_remove(struct platform_device *dev)
@@ -440,7 +429,6 @@ static void i2c_lpc2k_remove(struct platform_device *dev)
 	struct lpc2k_i2c *i2c = platform_get_drvdata(dev);
 
 	i2c_del_adapter(&i2c->adap);
-	clk_disable_unprepare(i2c->clk);
 }
 
 #ifdef CONFIG_PM
Signature · 1 line
2.40.1
Applied
#23 lore raw

Re: [PATCH 07/15] i2c: busses: lpc2k: Use devm_clk_get_enabled()

Quoted 6 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Cc Vladimir Zapolskiy <[email protected]>

Applied to for-next, thanks!

author maintainer
#24 lore raw

PATCH 8/15 i2c: busses: mt7621: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Stefan Roese <[email protected]>
Cc Matthias Brugger <[email protected]>
Cc AngeloGioacchino Del Regno <[email protected]>
---
 drivers/i2c/busses/i2c-mt7621.c | 20 ++++----------------
 1 file changed, 4 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-mt7621.c +4 -16
index f9c294e2bd3c5..104bb194e9906 100644
@@ -282,16 +282,11 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
 		return PTR_ERR(i2c->clk);
 	}
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock\n");
-		return ret;
-	}
 
 	i2c->dev = &pdev->dev;
 
@@ -301,8 +296,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	if (i2c->bus_freq == 0) {
 		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
-		ret = -EINVAL;
-		goto err_disable_clk;
+		return -EINVAL;
 	}
 
 	adap = &i2c->adap;
@@ -320,23 +314,17 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret < 0)
-		goto err_disable_clk;
+		return ret;
 
 	dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
 
 	return 0;
-
-err_disable_clk:
-	clk_disable_unprepare(i2c->clk);
-
-	return ret;
 }
 
 static void mtk_i2c_remove(struct platform_device *pdev)
 {
 	struct mtk_i2c *i2c = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(i2c->clk);
 	i2c_del_adapter(&i2c->adap);
 }
 
Signature · 1 line
2.40.1
maintainer Reviewed-by on v1 8/15
#25 lore raw

Re: [PATCH 08/15] i2c: busses: mt7621: Use devm_clk_get_enabled()

Quoted 8 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Stefan Roese <[email protected]>
Cc Matthias Brugger <[email protected]>
Cc AngeloGioacchino Del Regno <[email protected]>
Quoted 62 lines
---
  drivers/i2c/busses/i2c-mt7621.c | 20 ++++----------------
  1 file changed, 4 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-mt7621.c +4 -16
index f9c294e2bd3c5..104bb194e9906 100644
@@ -282,16 +282,11 @@ static int mtk_i2c_probe(struct platform_device *pdev)
  	if (IS_ERR(i2c->base))
  		return PTR_ERR(i2c->base);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
  	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
  		return PTR_ERR(i2c->clk);
  	}
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock\n");
-		return ret;
-	}
 
  	i2c->dev = &pdev->dev;
 
@@ -301,8 +296,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
  	if (i2c->bus_freq == 0) {
  		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
-		ret = -EINVAL;
-		goto err_disable_clk;
+		return -EINVAL;
  	}
 
  	adap = &i2c->adap;
@@ -320,23 +314,17 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
  	ret = i2c_add_adapter(adap);
  	if (ret < 0)
-		goto err_disable_clk;
+		return ret;
 
  	dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
 
  	return 0;
-
-err_disable_clk:
-	clk_disable_unprepare(i2c->clk);
-
-	return ret;
  }
 
  static void mtk_i2c_remove(struct platform_device *pdev)
  {
  	struct mtk_i2c *i2c = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(i2c->clk);
  	i2c_del_adapter(&i2c->adap);
  }
 
maintainer Reviewed-by on v1 8/15
#26 lore raw

Re: [PATCH 08/15] i2c: busses: mt7621: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 8 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Stefan Roese <[email protected]>
Cc Matthias Brugger <[email protected]>
Cc AngeloGioacchino Del Regno <[email protected]>

Thanks,
Stefan

Quoted 52 lines
---
  drivers/i2c/busses/i2c-mt7621.c | 20 ++++----------------
  1 file changed, 4 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-mt7621.c +4 -15
index f9c294e2bd3c5..104bb194e9906 100644
@@ -282,16 +282,11 @@ static int mtk_i2c_probe(struct platform_device *pdev)
  	if (IS_ERR(i2c->base))
  		return PTR_ERR(i2c->base);
 
-	i2c->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c->clk = devm_clk_get_enabled(&pdev->dev, NULL);
  	if (IS_ERR(i2c->clk)) {
-		dev_err(&pdev->dev, "no clock defined\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
  		return PTR_ERR(i2c->clk);
  	}
-	ret = clk_prepare_enable(i2c->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Unable to enable clock\n");
-		return ret;
-	}
 
  	i2c->dev = &pdev->dev;
 
@@ -301,8 +296,7 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
  	if (i2c->bus_freq == 0) {
  		dev_warn(i2c->dev, "clock-frequency 0 not supported\n");
-		ret = -EINVAL;
-		goto err_disable_clk;
+		return -EINVAL;
  	}
 
  	adap = &i2c->adap;
@@ -320,23 +314,17 @@ static int mtk_i2c_probe(struct platform_device *pdev)
 
  	ret = i2c_add_adapter(adap);
  	if (ret < 0)
-		goto err_disable_clk;
+		return ret;
 
  	dev_info(&pdev->dev, "clock %u kHz\n", i2c->bus_freq / 1000);
 
  	return 0;
-
-err_disable_clk:
-	clk_disable_unprepare(i2c->clk);
-
-	return ret;

drivers/i2c/busses/i2c-mt7621.c static int mtk_i2c_probe(struct platform_device *pdev) · line 330

Quoted 10 lines
drivers/i2c/busses/i2c-mt7621.c +0 -1
  }
 
  static void mtk_i2c_remove(struct platform_device *pdev)
  {
  	struct mtk_i2c *i2c = platform_get_drvdata(pdev);
 
-	clk_disable_unprepare(i2c->clk);
  	i2c_del_adapter(&i2c->adap);
  }
 

Viele Grüße,
Stefan Roese

Signature · 3 lines
DENX Software Engineering GmbH,      Managing Director: Erika Unter
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: [email protected]
author maintainer
#28 lore raw

PATCH 9/15 i2c: busses: owl: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Andreas Färber <[email protected]>
Cc Manivannan Sadhasivam <[email protected]>
---
 drivers/i2c/busses/i2c-owl.c | 18 ++++--------------
 1 file changed, 4 insertions(+), 14 deletions(-)
drivers/i2c/busses/i2c-owl.c +4 -14
index 99ddd88949645..5f0ef8c351418 100644
@@ -461,21 +461,16 @@ static int owl_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	i2c_dev->clk = devm_clk_get(dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(dev, "failed to get clock\n");
+		dev_err(dev, "failed to enable clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
 
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret)
-		return ret;
-
 	i2c_dev->clk_rate = clk_get_rate(i2c_dev->clk);
 	if (!i2c_dev->clk_rate) {
 		dev_err(dev, "input clock rate should not be zero\n");
-		ret = -EINVAL;
-		goto disable_clk;
+		return -EINVAL;
 	}
 
 	init_completion(&i2c_dev->msg_complete);
@@ -496,15 +491,10 @@ static int owl_i2c_probe(struct platform_device *pdev)
 			       i2c_dev);
 	if (ret) {
 		dev_err(dev, "failed to request irq %d\n", irq);
-		goto disable_clk;
+		return ret;
 	}
 
 	return i2c_add_adapter(&i2c_dev->adap);
-
-disable_clk:
-	clk_disable_unprepare(i2c_dev->clk);
-
-	return ret;
 }
 
 static const struct of_device_id owl_i2c_of_match[] = {
Signature · 1 line
2.40.1
Applied
#29 lore raw

Re: [PATCH 09/15] i2c: busses: owl: Use devm_clk_get_enabled()

Quoted 7 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Andreas Färber <[email protected]>
Cc Manivannan Sadhasivam <[email protected]>

Applied to for-next, thanks! But I still wonder why this driver does not have a remove function?

author maintainer
#30 lore raw

PATCH 10/15 i2c: busses: pasemi-platform: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Michael Ellerman <[email protected]>
Cc Nicholas Piggin <[email protected]>
Cc Christophe Leroy <[email protected]>
Cc Hector Martin <[email protected]>
Cc Sven Peter <[email protected]>
Cc Alyssa Rosenzweig <[email protected]>
---
 drivers/i2c/busses/i2c-pasemi-platform.c | 22 ++++------------------
 1 file changed, 4 insertions(+), 18 deletions(-)
drivers/i2c/busses/i2c-pasemi-platform.c +4 -18
index 0a44f64897c7a..5fbfb9b417440 100644
@@ -66,22 +66,18 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 	if (of_property_read_u32(dev->of_node, "clock-frequency", &frequency))
 		frequency = I2C_MAX_STANDARD_MODE_FREQ;
 
-	data->clk_ref = devm_clk_get(dev, NULL);
+	data->clk_ref = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(data->clk_ref))
 		return PTR_ERR(data->clk_ref);
 
-	error = clk_prepare_enable(data->clk_ref);
-	if (error)
-		return error;
-
 	error = pasemi_platform_i2c_calc_clk_div(data, frequency);
 	if (error)
-		goto out_clk_disable;
+		return error;
 
 	smbus->adapter.dev.of_node = pdev->dev.of_node;
 	error = pasemi_i2c_common_probe(smbus);
 	if (error)
-		goto out_clk_disable;
+		return error;
 
 	irq_num = platform_get_irq(pdev, 0);
 	error = devm_request_irq(smbus->dev, irq_num, pasemi_irq_handler, 0, "pasemi_apple_i2c", (void *)smbus);
@@ -91,19 +87,9 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, data);
 
 	return 0;
-
-out_clk_disable:
-	clk_disable_unprepare(data->clk_ref);
-
-	return error;
 }
 
-static void pasemi_platform_i2c_remove(struct platform_device *pdev)
-{
-	struct pasemi_platform_i2c_data *data = platform_get_drvdata(pdev);
-
-	clk_disable_unprepare(data->clk_ref);
-}
+static void pasemi_platform_i2c_remove(struct platform_device *pdev) { }
 
 static const struct of_device_id pasemi_platform_i2c_of_match[] = {
 	{ .compatible = "apple,t8103-i2c" },
Signature · 1 line
2.40.1
Reviewed-by on v1 10/15
#31 lore raw

Re: [PATCH 10/15] i2c: busses: pasemi-platform: Use devm_clk_get_enabled()

Quoted 69 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and
clk_prepare_enable(), with a single function
devm_clk_get_enabled().

Cc Michael Ellerman <[email protected]>
Cc Nicholas Piggin <[email protected]>
Cc Christophe Leroy <[email protected]>
Cc Hector Martin <[email protected]>
Cc Sven Peter <[email protected]>
Cc Alyssa Rosenzweig <[email protected]>

---
drivers/i2c/busses/i2c-pasemi-platform.c | 22 ++++------------------

1 file changed, 4 insertions(+), 18 deletions(-)
drivers/i2c/busses/i2c-pasemi-platform.c +3 -7
index 0a44f64897c7a..5fbfb9b417440 100644
@@ -66,22 +66,18 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 if (of_property_read_u32(dev->of_node, "clock-frequency", &frequency))
 frequency = I2C_MAX_STANDARD_MODE_FREQ;
 
- data->clk_ref = devm_clk_get(dev, NULL);
+ data->clk_ref = devm_clk_get_enabled(dev, NULL);
 if (IS_ERR(data->clk_ref))
 return PTR_ERR(data->clk_ref);
 
- error = clk_prepare_enable(data->clk_ref);
- if (error)
- return error;
-
 error = pasemi_platform_i2c_calc_clk_div(data, frequency);
 if (error)
- goto out_clk_disable;
+ return error;
 
 smbus->adapter.dev.of_node = pdev->dev.of_node;
 error = pasemi_i2c_common_probe(smbus);
 if (error)
- goto out_clk_disable;
+ return error;
 
 irq_num = platform_get_irq(pdev, 0);

error = devm_request_irq(smbus->dev, irq_num, pasemi_irq_handler, 0, "pasemi_apple_i2c", (void *)smbus);

drivers/i2c/busses/i2c-pasemi-platform.c +1 -11
@@ -91,19 +87,9 @@ static int pasemi_platform_i2c_probe(struct platform_device *pdev)
 platform_set_drvdata(pdev, data);
 
 return 0;
-
-out_clk_disable:
- clk_disable_unprepare(data->clk_ref);
-
- return error;
 }
 
-static void pasemi_platform_i2c_remove(struct platform_device *pdev)
-{
- struct pasemi_platform_i2c_data *data = platform_get_drvdata(pdev);
-
- clk_disable_unprepare(data->clk_ref);
-}
+static void pasemi_platform_i2c_remove(struct platform_device *pdev) { }
 
 static const struct of_device_id pasemi_platform_i2c_of_match[] = {
 { .compatible = "apple,t8103-i2c" },
Signature · 1 line
2.40.1
Applied
#32 lore raw

Re: [PATCH 10/15] i2c: busses: pasemi-platform: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 11 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Michael Ellerman <[email protected]>
Cc Nicholas Piggin <[email protected]>
Cc Christophe Leroy <[email protected]>
Cc Hector Martin <[email protected]>
Cc Sven Peter <[email protected]>
Cc Alyssa Rosenzweig <[email protected]>

Applied to for-next, thanks!

author maintainer
#33 lore raw

PATCH 11/15 i2c: busses: stm32f4: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/i2c/busses/i2c-stm32f4.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)
drivers/i2c/busses/i2c-stm32f4.c +10 -22
index 6ad06a5a22b43..7bbb0acbdf74d 100644
@@ -784,23 +784,17 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -817,7 +811,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
@@ -825,12 +819,12 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = stm32f4_i2c_hw_config(i2c_dev);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	adap = &i2c_dev->adap;
 	i2c_set_adapdata(adap, i2c_dev);
@@ -846,7 +840,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	platform_set_drvdata(pdev, i2c_dev);
 
@@ -855,10 +849,6 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
 
 	return 0;
-
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-	return ret;
 }
 
 static void stm32f4_i2c_remove(struct platform_device *pdev)
@@ -866,8 +856,6 @@ static void stm32f4_i2c_remove(struct platform_device *pdev)
 	struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c_dev->adap);
-
-	clk_unprepare(i2c_dev->clk);
 }
 
 static const struct of_device_id stm32f4_i2c_match[] = {
Signature · 1 line
2.40.1
maintainer Acked-by on v1 11/15
#34 lore raw

Re: [PATCH 11/15] i2c: busses: stm32f4: Use devm_clk_get_enabled()

Hi Andi,

sorry for the delay.

Quoted 103 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/i2c/busses/i2c-stm32f4.c | 32 ++++++++++----------------------
 1 file changed, 10 insertions(+), 22 deletions(-)
drivers/i2c/busses/i2c-stm32f4.c +10 -22
index 6ad06a5a22b43..7bbb0acbdf74d 100644
@@ -784,23 +784,17 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk)) {
-		dev_err(&pdev->dev, "Error: Missing controller clock\n");
+		dev_err(&pdev->dev, "Failed to enable clock\n");
 		return PTR_ERR(i2c_dev->clk);
 	}
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
 
 	rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -817,7 +811,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f4_i2c_isr_error, 0,
@@ -825,12 +819,12 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = stm32f4_i2c_hw_config(i2c_dev);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	adap = &i2c_dev->adap;
 	i2c_set_adapdata(adap, i2c_dev);
@@ -846,7 +840,7 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(adap);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	platform_set_drvdata(pdev, i2c_dev);
 
@@ -855,10 +849,6 @@ static int stm32f4_i2c_probe(struct platform_device *pdev)
 	dev_info(i2c_dev->dev, "STM32F4 I2C driver registered\n");
 
 	return 0;
-
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-	return ret;
 }
 
 static void stm32f4_i2c_remove(struct platform_device *pdev)
@@ -866,8 +856,6 @@ static void stm32f4_i2c_remove(struct platform_device *pdev)
 	struct stm32f4_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&i2c_dev->adap);
-
-	clk_unprepare(i2c_dev->clk);
 }
 
 static const struct of_device_id stm32f4_i2c_match[] = {
Signature · 1 line
2.40.1

Regards,
Alain

Applied
#35 lore raw

Re: [PATCH 11/15] i2c: busses: stm32f4: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 9 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>

Applied to for-next, thanks!

author maintainer
#36 lore raw

PATCH 12/15 i2c: busses: stm32f7: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/i2c/busses/i2c-stm32f7.c | 37 +++++++++++---------------------
 1 file changed, 12 insertions(+), 25 deletions(-)
drivers/i2c/busses/i2c-stm32f7.c +12 -25
index e897d9101434d..e556ba073bc0c 100644
@@ -2131,23 +2131,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
 						    "wakeup-source");
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
-				     "Failed to get controller clock\n");
-
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
+				     "Failed to enable controller clock\n");
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -2162,7 +2155,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
@@ -2170,29 +2163,28 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	setup = of_device_get_match_data(&pdev->dev);
 	if (!setup) {
 		dev_err(&pdev->dev, "Can't get device data\n");
-		ret = -ENODEV;
-		goto clk_free;
+		return -ENODEV;
 	}
 	i2c_dev->setup = *setup;
 
 	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	/* Setup Fast mode plus if necessary */
 	if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
 		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
 		if (ret)
-			goto clk_free;
+			return ret;
 		ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
 		if (ret)
-			goto clk_free;
+			return ret;
 	}
 
 	adap = &i2c_dev->adap;
@@ -2303,9 +2295,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 fmp_clear:
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
 
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-
 	return ret;
 }
 
@@ -2339,8 +2328,6 @@ static void stm32f7_i2c_remove(struct platform_device *pdev)
 	}
 
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
-
-	clk_disable_unprepare(i2c_dev->clk);
 }
 
 static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
Signature · 1 line
2.40.1
maintainer Acked-by on v1 12/15
#37 lore raw

Re: [PATCH 12/15] i2c: busses: stm32f7: Use devm_clk_get_enabled()

Hi Andi,

sorry for the delay.

Quoted 113 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>
---
 drivers/i2c/busses/i2c-stm32f7.c | 37 +++++++++++---------------------
 1 file changed, 12 insertions(+), 25 deletions(-)
drivers/i2c/busses/i2c-stm32f7.c +12 -25
index e897d9101434d..e556ba073bc0c 100644
@@ -2131,23 +2131,16 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	i2c_dev->wakeup_src = of_property_read_bool(pdev->dev.of_node,
 						    "wakeup-source");
 
-	i2c_dev->clk = devm_clk_get(&pdev->dev, NULL);
+	i2c_dev->clk = devm_clk_get_enabled(&pdev->dev, NULL);
 	if (IS_ERR(i2c_dev->clk))
 		return dev_err_probe(&pdev->dev, PTR_ERR(i2c_dev->clk),
-				     "Failed to get controller clock\n");
-
-	ret = clk_prepare_enable(i2c_dev->clk);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to prepare_enable clock\n");
-		return ret;
-	}
+				     "Failed to enable controller clock\n");
 
 	rst = devm_reset_control_get(&pdev->dev, NULL);
-	if (IS_ERR(rst)) {
-		ret = dev_err_probe(&pdev->dev, PTR_ERR(rst),
-				    "Error: Missing reset ctrl\n");
-		goto clk_free;
-	}
+	if (IS_ERR(rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(rst),
+				     "Error: Missing reset ctrl\n");
+
 	reset_control_assert(rst);
 	udelay(2);
 	reset_control_deassert(rst);
@@ -2162,7 +2155,7 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq event %i\n",
 			irq_event);
-		goto clk_free;
+		return ret;
 	}
 
 	ret = devm_request_irq(&pdev->dev, irq_error, stm32f7_i2c_isr_error, 0,
@@ -2170,29 +2163,28 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to request irq error %i\n",
 			irq_error);
-		goto clk_free;
+		return ret;
 	}
 
 	setup = of_device_get_match_data(&pdev->dev);
 	if (!setup) {
 		dev_err(&pdev->dev, "Can't get device data\n");
-		ret = -ENODEV;
-		goto clk_free;
+		return -ENODEV;
 	}
 	i2c_dev->setup = *setup;
 
 	ret = stm32f7_i2c_setup_timing(i2c_dev, &i2c_dev->setup);
 	if (ret)
-		goto clk_free;
+		return ret;
 
 	/* Setup Fast mode plus if necessary */
 	if (i2c_dev->bus_rate > I2C_MAX_FAST_MODE_FREQ) {
 		ret = stm32f7_i2c_setup_fm_plus_bits(pdev, i2c_dev);
 		if (ret)
-			goto clk_free;
+			return ret;
 		ret = stm32f7_i2c_write_fm_plus_bits(i2c_dev, true);
 		if (ret)
-			goto clk_free;
+			return ret;
 	}
 
 	adap = &i2c_dev->adap;
@@ -2303,9 +2295,6 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
 fmp_clear:
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
 
-clk_free:
-	clk_disable_unprepare(i2c_dev->clk);
-
 	return ret;
 }
 
@@ -2339,8 +2328,6 @@ static void stm32f7_i2c_remove(struct platform_device *pdev)
 	}
 
 	stm32f7_i2c_write_fm_plus_bits(i2c_dev, false);
-
-	clk_disable_unprepare(i2c_dev->clk);
 }
 
 static int __maybe_unused stm32f7_i2c_runtime_suspend(struct device *dev)
Signature · 1 line
2.40.1

Regards,
Alain

Applied
#38 lore raw

Re: [PATCH 12/15] i2c: busses: stm32f7: Use devm_clk_get_enabled()

In reply to Andi Shyti
Quoted 9 lines · Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Pierre-Yves MORDRET <[email protected]>
Cc Alain Volmat <[email protected]>
Cc Maxime Coquelin <[email protected]>
Cc Alexandre Torgue <[email protected]>

Applied to for-next, thanks!

author maintainer
#39 lore raw

PATCH 13/15 i2c: busses: sun6i-p2wi: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Chen-Yu Tsai <[email protected]>
Cc Jernej Skrabec <[email protected]>
Cc Samuel Holland <[email protected]>
---
 drivers/i2c/busses/i2c-sun6i-p2wi.c | 17 +++--------------
 1 file changed, 3 insertions(+), 14 deletions(-)
drivers/i2c/busses/i2c-sun6i-p2wi.c +3 -14
index 3cff1afe0caa2..ad8270cdbd3eb 100644
@@ -239,15 +239,9 @@ static int p2wi_probe(struct platform_device *pdev)
 	if (irq < 0)
 		return irq;
 
-	p2wi->clk = devm_clk_get(dev, NULL);
+	p2wi->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(p2wi->clk)) {
 		ret = PTR_ERR(p2wi->clk);
-		dev_err(dev, "failed to retrieve clk: %d\n", ret);
-		return ret;
-	}
-
-	ret = clk_prepare_enable(p2wi->clk);
-	if (ret) {
 		dev_err(dev, "failed to enable clk: %d\n", ret);
 		return ret;
 	}
@@ -256,15 +250,14 @@ static int p2wi_probe(struct platform_device *pdev)
 
 	p2wi->rstc = devm_reset_control_get_exclusive(dev, NULL);
 	if (IS_ERR(p2wi->rstc)) {
-		ret = PTR_ERR(p2wi->rstc);
 		dev_err(dev, "failed to retrieve reset controller: %d\n", ret);
-		goto err_clk_disable;
+		return PTR_ERR(p2wi->rstc);
 	}
 
 	ret = reset_control_deassert(p2wi->rstc);
 	if (ret) {
 		dev_err(dev, "failed to deassert reset line: %d\n", ret);
-		goto err_clk_disable;
+		return ret;
 	}
 
 	init_completion(&p2wi->complete);
@@ -307,9 +300,6 @@ static int p2wi_probe(struct platform_device *pdev)
 err_reset_assert:
 	reset_control_assert(p2wi->rstc);
 
-err_clk_disable:
-	clk_disable_unprepare(p2wi->clk);
-
 	return ret;
 }
 
@@ -318,7 +308,6 @@ static void p2wi_remove(struct platform_device *dev)
 	struct p2wi *p2wi = platform_get_drvdata(dev);
 
 	reset_control_assert(p2wi->rstc);
-	clk_disable_unprepare(p2wi->clk);
 	i2c_del_adapter(&p2wi->adapter);
 }
 
Signature · 1 line
2.40.1
maintainer Reviewed-by on v1 13/15
#40 lore raw

Re: [PATCH 13/15] i2c: busses: sun6i-p2wi: Use devm_clk_get_enabled()

Dne ponedeljek, 12. junij 2023 ob 00:57:00 CEST je Andi Shyti napisal(a):

Quoted 8 lines

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Chen-Yu Tsai <[email protected]>
Cc Jernej Skrabec <[email protected]>
Cc Samuel Holland <[email protected]>

Best regards,
Jernej

author maintainer
#42 lore raw

PATCH 14/15 i2c: busses: uniphier-f: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Kunihiko Hayashi <[email protected]>
Cc Masami Hiramatsu <[email protected]>
---
 drivers/i2c/busses/i2c-uniphier-f.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-uniphier-f.c +5 -16
index 54b1624ef87ea..dbc91c7c3788f 100644
@@ -540,21 +540,16 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	priv->clk = devm_clk_get(dev, NULL);
+	priv->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "failed to get clock\n");
+		dev_err(dev, "failed to enable clock\n");
 		return PTR_ERR(priv->clk);
 	}
 
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
-
 	clk_rate = clk_get_rate(priv->clk);
 	if (!clk_rate) {
 		dev_err(dev, "input clock rate should not be zero\n");
-		ret = -EINVAL;
-		goto disable_clk;
+		return -EINVAL;
 	}
 
 	priv->clk_cycle = clk_rate / bus_speed;
@@ -575,15 +570,10 @@ static int uniphier_fi2c_probe(struct platform_device *pdev)
 			       pdev->name, priv);
 	if (ret) {
 		dev_err(dev, "failed to request irq %d\n", irq);
-		goto disable_clk;
+		return ret;
 	}
 
-	ret = i2c_add_adapter(&priv->adap);
-disable_clk:
-	if (ret)
-		clk_disable_unprepare(priv->clk);
-
-	return ret;
+	return i2c_add_adapter(&priv->adap);
 }
 
 static void uniphier_fi2c_remove(struct platform_device *pdev)
@@ -591,7 +581,6 @@ static void uniphier_fi2c_remove(struct platform_device *pdev)
 	struct uniphier_fi2c_priv *priv = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&priv->adap);
-	clk_disable_unprepare(priv->clk);
 }
 
 static int __maybe_unused uniphier_fi2c_suspend(struct device *dev)
Signature · 1 line
2.40.1
author maintainer
#44 lore raw

PATCH 15/15 i2c: busses: uniphier: Use devm_clk_get_enabled()

In reply to Andi Shyti

Replace the pair of functions, devm_clk_get() and clk_prepare_enable(), with a single function devm_clk_get_enabled().

Cc Kunihiko Hayashi <[email protected]>
Cc Masami Hiramatsu <[email protected]>
---
 drivers/i2c/busses/i2c-uniphier.c | 21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)
drivers/i2c/busses/i2c-uniphier.c +5 -16
index 96b1eb7489a3c..854ac25b58628 100644
@@ -335,21 +335,16 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	priv->clk = devm_clk_get(dev, NULL);
+	priv->clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(priv->clk)) {
-		dev_err(dev, "failed to get clock\n");
+		dev_err(dev, "failed to enable clock\n");
 		return PTR_ERR(priv->clk);
 	}
 
-	ret = clk_prepare_enable(priv->clk);
-	if (ret)
-		return ret;
-
 	clk_rate = clk_get_rate(priv->clk);
 	if (!clk_rate) {
 		dev_err(dev, "input clock rate should not be zero\n");
-		ret = -EINVAL;
-		goto disable_clk;
+		return -EINVAL;
 	}
 
 	priv->clk_cycle = clk_rate / bus_speed;
@@ -369,15 +364,10 @@ static int uniphier_i2c_probe(struct platform_device *pdev)
 			       priv);
 	if (ret) {
 		dev_err(dev, "failed to request irq %d\n", irq);
-		goto disable_clk;
+		return ret;
 	}
 
-	ret = i2c_add_adapter(&priv->adap);
-disable_clk:
-	if (ret)
-		clk_disable_unprepare(priv->clk);
-
-	return ret;
+	return i2c_add_adapter(&priv->adap);
 }
 
 static void uniphier_i2c_remove(struct platform_device *pdev)
@@ -385,7 +375,6 @@ static void uniphier_i2c_remove(struct platform_device *pdev)
 	struct uniphier_i2c_priv *priv = platform_get_drvdata(pdev);
 
 	i2c_del_adapter(&priv->adap);
-	clk_disable_unprepare(priv->clk);
 }
 
 static int __maybe_unused uniphier_i2c_suspend(struct device *dev)
Signature · 1 line
2.40.1