HID: rmi: Add functions for writing to registers
PATCH 1/3 HID: rmi: Add functions for writing to registers
Writing to registers is needed for setting configuration parameters.
--- drivers/hid/hid-rmi.c | 40 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
drivers/hid/hid-rmi.c +40 -0
@@ -274,6 +274,46 @@ static inline int rmi_read(struct hid_device *hdev, u16 addr, void *buf)return rmi_read_block (hdev, addr, buf,1 ); } +static int rmi_write_block (struct hid_device *hdev,u16 addr,void *buf, +const int len) +{ +struct rmi_data *data =hid_get_drvdata (hdev); +int ret; + +mutex_lock (&data->page_mutex); + +if (RMI_PAGE (addr) != data->page) { + ret =rmi_set_page (hdev,RMI_PAGE (addr)); +if (ret <0 ) + goto exit; + } + + data->writeReport[0 ] =RMI_WRITE_REPORT_ID ; + data->writeReport[1 ] = len; + data->writeReport[2 ] = addr &0xFF ; + data->writeReport[3 ] = (addr >>8 ) &0xFF ; +memcpy (&data->writeReport[4 ], buf, len); + + ret =rmi_write_report (hdev, data->writeReport, + data->output_report_size); +if (ret <0 ) { +dev_err (&hdev->dev, +"failed to write request output report (%d)\n" , + ret); + goto exit; + } + ret =0 ; + +exit: +mutex_unlock (&data->page_mutex); +return ret; +} + +static inline int rmi_write (struct hid_device *hdev,u16 addr,void *buf) +{ +return rmi_write_block (hdev, addr, buf,1 ); +} +static void rmi_f11_process_touch (struct rmi_data *hdata,int slot,u8 finger_state,u8 *touch_data) {
Signature · 1 line
2.1.0
PATCH 2/3 HID: rmi: disable dribble packets on Synaptics touchpads
When a finger is lifted from a Synaptics touchpad the firmware will continue to interrupts for up to a second. These additional interrupts are know and dribble interrupts. Since the data read from the touchpad does not change the input subsystem only reports a single event. This makes the servicing of dribble interrupts on Linux unnecessary. This patch simply disables dribble interupts when configuring the touchpad.
--- drivers/hid/hid-rmi.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
drivers/hid/hid-rmi.c +19 -0
@@ -751,6 +751,7 @@ static int rmi_populate_f11(struct hid_device *hdev)bool has_gestures;bool has_rel;bool has_data40 = false; +bool has_dribble = false;unsigned x_size, y_size;u16 query_offset;
@@ -792,6 +793,14 @@ static int rmi_populate_f11(struct hid_device *hdev) has_rel = !!(buf[0 ] &BIT (3 )); has_gestures = !!(buf[0 ] &BIT (5 )); + ret =rmi_read (hdev, data->f11.query_base_addr +5 , buf); +if (ret) { +hid_err (hdev,"can not get absolute data sources: %d.\n" , ret); +return ret; + } + + has_dribble = !!(buf[0 ] &BIT (4 )); +/* * At least 4 queries are guaranteed to be present in F11 * +1 for query 5 which is present since absolute events are
@@ -908,6 +917,16 @@ static int rmi_populate_f11(struct hid_device *hdev) data->max_x = buf[6 ] | (buf[7 ] <<8 ); data->max_y = buf[8 ] | (buf[9 ] <<8 ); +if (has_dribble) { + buf[0 ] = buf[0 ] & ~BIT (6 ); + ret =rmi_write (hdev, data->f11.control_base_addr, buf); +if (ret) { +hid_err (hdev,"can not write to control reg 0: %d.\n" , + ret); +return ret; + } + } +return 0 ; }
Signature · 1 line
2.1.0
PATCH 3/3 HID: rmi: disable palm detect gesture when present
In reply to Andrew DugganA touchpad may have firmware based palm detection code enabled which suppresses 2D data from being reported when the firmware believes a palm is on the touchpad. This functionality is meant to be used in mouse mode without a driver. When a driver is present, the driver can do a better job of determining if a contact is a palm. If this gesture is enabled on a touchpad operating in rmi mode then the firmware will not properly clear the palm detect interrupt, causing the touchpad to interrupt indefinately. This patch disables the palm detect gesture when the touchpad is operating in rmi mode.
---
Hi Gabriele,
Can you test this patch on your system to confirm that it fixes your issue? I was able to test the other two patches so I can confirm that the write fuction works. But, I don't have a touchpad with the palm detect gesture enabled so it would be good to double check that I have the right address and mask.
Andrew
drivers/hid/hid-rmi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)
drivers/hid/hid-rmi.c +16 -3
@@ -752,6 +752,7 @@ static int rmi_populate_f11(struct hid_device *hdev)bool has_rel;bool has_data40 = false;bool has_dribble = false; +bool has_palm_detect = false;unsigned x_size, y_size;u16 query_offset;
@@ -820,6 +821,7 @@ static int rmi_populate_f11(struct hid_device *hdev) ret);return ret; } + has_palm_detect = !!(buf[0 ] &BIT (0 )); has_query10 = !!(buf[0 ] &BIT (2 )); query_offset +=2 ;/* query 7 and 8 are present */
@@ -906,11 +908,11 @@ static int rmi_populate_f11(struct hid_device *hdev)* retrieve the ctrl registers * the ctrl register has a size of 20 but a fw bug split it into 16 + 4, * and there is no way to know if the first 20 bytes are here or not. -* We use only the first 10 bytes, so get only them. +* We use only the first 12 bytes, so get only them. */ - ret =rmi_read_block (hdev, data->f11.control_base_addr, buf,10 ); + ret =rmi_read_block (hdev, data->f11.control_base_addr, buf,12 );if (ret) { -hid_err (hdev,"can not read ctrl block of size 10: %d.\n" , ret); +hid_err (hdev,"can not read ctrl block of size 11: %d.\n" , ret);return ret; }
@@ -927,6 +929,17 @@ static int rmi_populate_f11(struct hid_device *hdev) } } +if (has_palm_detect) { + buf[11 ] = buf[11 ] & ~BIT (0 ); + ret =rmi_write (hdev, data->f11.control_base_addr +11 , + &buf[11 ]); +if (ret) { +hid_err (hdev,"can not write to control reg 11: %d.\n" , + ret); +return ret; + } + } +return 0 ; }
Signature · 1 line
2.1.0
Re: [PATCH 3/3] HID: rmi: disable palm detect gesture when present
Quoted 13 lines · On Tuesday 24 February 2015 17:36:50 Andrew Duggan wrote:
A touchpad may have firmware based palm detection code enabled which suppresses 2D data from being reported when the firmware believes a palm is on the touchpad. This functionality is meant to be used in mouse mode without a driver. When a driver is present, the driver can do a better job of determining if a contact is a palm. If this gesture is enabled on a touchpad operating in rmi mode then the firmware will not properly clear the palm detect interrupt, causing the touchpad to interrupt indefinately. This patch disables the palm detect gesture when the touchpad is operating in rmi mode.
Signed-off-by Andrew Duggan <[email protected]>---
Hi Gabriele,
Quoted 7 lines
Can you test this patch on your system to confirm that it fixes your issue? I was able to test the other two patches so I can confirm that the write fuction works. But, I don't have a touchpad with the palm detect gesture enabled so it would be good to double check that I have the right address and mask.
Andrew
I tested it and confirm that it's working. Thanks.
Gabriele
Re: [PATCH 3/3] HID: rmi: disable palm detect gesture when present
Quoted 20 lines · Gabriele Mazzotta
Quoted 19 lines · On Tuesday 24 February 2015 17:36:50 Andrew Duggan wrote:
A touchpad may have firmware based palm detection code enabled which suppresses 2D data from being reported when the firmware believes a palm is on the touchpad. This functionality is meant to be used in mouse mode without a driver. When a driver is present, the driver can do a better job of determining if a contact is a palm. If this gesture is enabled on a touchpad operating in rmi mode then the firmware will not properly clear the palm detect interrupt, causing the touchpad to interrupt indefinately. This patch disables the palm detect gesture when the touchpad is operating in rmi mode.
Signed-off-by Andrew Duggan <[email protected]>---
Hi Gabriele,Can you test this patch on your system to confirm that it fixes your issue? I was able to test the other two patches so I can confirm that the write fuction works. But, I don't have a touchpad with the palm detect gesture enabled so it would be good to double check that I have the right address and mask.
Quoted 3 lines
Quoted 1 line
Andrew
I tested it and confirm that it's working. Thanks.
Thanks for testing. I have now applied the series to for-4.1/rmi.
Signature · 2 lines
Jiri Kosina SUSE Labs