ACPICA: ACPICA 20210730
Subsystems (2)
cover ACPICA: ACPICA 20210730
Hi All,
This series of patches is the linux-ized set of ACPICA 20210730 changes described at https://acpica.org/sites/acpica/files/changes_59.txt
It contains the following changes:
Bob Moore (6):
ACPICA: iASL: Add support for the AEST table (data compiler)
ACPICA: Fix an if statement (add parens)
ACPICA: Macros should not use a trailing semicolon
ACPICA: iASL: Fix for WPBT table with no command-line arguments
ACPICA: Add method name "_DIS" For use with aslmethod.c
ACPICA: Update version to 20210730
Marcin Wojtas (1):
ACPICA: Headers: Add new DBG2 Serial Port Subtypes
Thanks!
PATCH 1/7 ACPICA: iASL: Add support for the AEST table (data compiler)
From: Bob Moore <[email protected]>
Includes support in the table compiler and the disassembler.
ACPICA commit e75074d84d1207339a048486c2d06ecb935d0092
--- include/acpi/actbl1.h | 1 + include/acpi/actbl2.h | 170 ++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 171 insertions(+)
include/acpi/actbl1.h +1 -0
@@ -24,6 +24,7 @@* file. Useful because they make it more difficult to inadvertently type in * the wrong signature. */ +#define ACPI_SIG_AEST "AEST"/* Arm Error Source Table */ #define ACPI_SIG_ASF "ASF!"/* Alert Standard Format table */ #define ACPI_SIG_BERT "BERT"/* Boot Error Record Table */ #define ACPI_SIG_BGRT "BGRT"/* Boot Graphics Resource Table */
include/acpi/actbl2.h +170 -0
176 lines not on this page · raw message
Signature · 1 line
2.26.2
PATCH 2/7 ACPICA: Fix an if statement (add parens)
In reply to Rafael J. WysockiFrom: Bob Moore <[email protected]>
ACPICA commit 4dbe4b9a0c203b04918705f022e0db997aa55696
--- drivers/acpi/acpica/dswexec.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
drivers/acpi/acpica/dswexec.c +2 -3
@@ -561,11 +561,10 @@ acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state) op->common. node->object, NULL); - if ACPI_FAILURE - (status) { +if (ACPI_FAILURE (status)) {ACPI_EXCEPTION ((AE_INFO , status,"While writing to buffer field" )); - } + } }ACPI_FREE (namepath); status =AE_OK ;
Signature · 1 line
2.26.2
PATCH 3/7 ACPICA: Macros should not use a trailing semicolon
In reply to Rafael J. WysockiFrom: Bob Moore <[email protected]>
ACPICA commit 8d49c0b2b78b8a8c5dae4d5ff28432729f4d59f2
--- include/acpi/acoutput.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/acpi/acoutput.h +1 -1
@@ -415,7 +415,7 @@/* Conditional execution */ #define ACPI_DEBUG_EXEC (a) a -#define ACPI_DEBUG_ONLY_MEMBERS (a) a; +#define ACPI_DEBUG_ONLY_MEMBERS (a) a#define _VERBOSE_STRUCTURES/* Various object display routines for debug */
Signature · 1 line
2.26.2
PATCH 4/7 ACPICA: Headers: Add new DBG2 Serial Port Subtypes
In reply to Rafael J. WysockiFrom: Marcin Wojtas <[email protected]>
The Microsoft Debug Port Table 2 (DBG2) specification revision September 21, 2020 comprises additional Serial Port Subtypes [1]. Reflect that in the actbl1.h header file.
[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/acpi-debug-port-table
ACPICA commit d95c7d206b5836c7770e8e9cd613859887fded8f
--- include/acpi/actbl1.h | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
include/acpi/actbl1.h +14 -1
@@ -483,7 +483,7 @@ struct acpi_csrt_descriptor {* DBG2 - Debug Port Table 2 * Version 0 (Both main table and subtables) * -* Conforms to "Microsoft Debug Port Table 2 (DBG2)", December 10, 2015 +* Conforms to "Microsoft Debug Port Table 2 (DBG2)", September 21, 2020 * ******************************************************************************/
@@ -533,11 +533,24 @@ struct acpi_dbg2_device {#define ACPI_DBG2_16550_COMPATIBLE 0x0000#define ACPI_DBG2_16550_SUBSET 0x0001 +#define ACPI_DBG2_MAX311XE_SPI 0x0002#define ACPI_DBG2_ARM_PL011 0x0003 +#define ACPI_DBG2_MSM8X60 0x0004 +#define ACPI_DBG2_16550_NVIDIA 0x0005 +#define ACPI_DBG2_TI_OMAP 0x0006 +#define ACPI_DBG2_APM88XXXX 0x0008 +#define ACPI_DBG2_MSM8974 0x0009 +#define ACPI_DBG2_SAM5250 0x000A +#define ACPI_DBG2_INTEL_USIF 0x000B +#define ACPI_DBG2_IMX6 0x000C#define ACPI_DBG2_ARM_SBSA_32BIT 0x000D#define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E#define ACPI_DBG2_ARM_DCC 0x000F#define ACPI_DBG2_BCM2835 0x0010 +#define ACPI_DBG2_SDM845_1_8432MHZ 0x0011 +#define ACPI_DBG2_16550_WITH_GAS 0x0012 +#define ACPI_DBG2_SDM845_7_372MHZ 0x0013 +#define ACPI_DBG2_INTEL_LPSS 0x0014#define ACPI_DBG2_1394_STANDARD 0x0000
Signature · 1 line
2.26.2
PATCH 5/7 ACPICA: iASL: Fix for WPBT table with no command-line arguments
In reply to Rafael J. WysockiFrom: Bob Moore <[email protected]>
Handle the case where the Command-line Arguments table field does not exist.
ACPICA commit d6487164497fda170a1b1453c5d58f2be7c873d6
--- include/acpi/actbl3.h | 4 ++++ 1 file changed, 4 insertions(+)
include/acpi/actbl3.h +4 -0
@@ -723,6 +723,10 @@ struct acpi_table_wpbt {u16 arguments_length; }; +struct acpi_wpbt_unicode { +u16 *unicode_string; +}; +/******************************************************************************* * * WSMT - Windows SMM Security Mitigations Table
Signature · 1 line
2.26.2
PATCH 6/7 ACPICA: Add method name "_DIS" For use with aslmethod.c
In reply to Rafael J. WysockiFrom: Bob Moore <[email protected]>
ACPICA commit 5acc6818c537888be147d9da6b280a0b8c241a1d
--- include/acpi/acnames.h | 1 + 1 file changed, 1 insertion(+)
include/acpi/acnames.h +1 -0
@@ -20,6 +20,7 @@#define METHOD_NAME__CLS "_CLS"#define METHOD_NAME__CRS "_CRS"#define METHOD_NAME__DDN "_DDN" +#define METHOD_NAME__DIS "_DIS"#define METHOD_NAME__DMA "_DMA"#define METHOD_NAME__HID "_HID"#define METHOD_NAME__INI "_INI"
Signature · 1 line
2.26.2
PATCH 7/7 ACPICA: Update version to 20210730
In reply to Rafael J. WysockiFrom: Bob Moore <[email protected]>
Version 20210730.
ACPICA commit 2195f614e79442beb4d24d7a29a6347493e444e5
--- include/acpi/acpixf.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
include/acpi/acpixf.h +1 -1
@@ -12,7 +12,7 @@/* Current ACPICA subsystem version in YYYYMMDD format */ -#define ACPI_CA_VERSION 0x20210604 +#define ACPI_CA_VERSION 0x20210730#include <acpi/acconfig.h> #include <acpi/actypes.h>
Signature · 1 line
2.26.2