Skip to contentSkip to conversation

: ISAPNP cards (opl3sa2 in particular) are not detected properly on 2.6 kernels

ALSA - utils 0001326 [email protected] 1 participant 1 message Aug 12, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1326>
======================================================================

Reported By:                ahaning
Assigned To:                perex
======================================================================
Project:                    ALSA - utils
Issue ID:                   1326
Category:                   alsaconf
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     assigned
======================================================================
Date Submitted:             08-10-2005 03:39 CEST
Last Modified:              08-12-2005 03:09 CEST

======================================================================
Summary: ISAPNP cards (opl3sa2 in particular) are not
detected properly on 2.6 kernels
Description:
When brute-force detecting my OPL3SA2 card, the IRQ and DMA1/DMA2 settings are incorrectly detected by alsaconf from alsa-utils. For example, the default BIOS settings are IRQ=11, DMA1=0, DMA2=1, but alsaconf detects IRQ=5, DMA1=1, DMA2=0. No matter the BIOS settings, alsaconf always detects those settings (IRQ=5, DMA1=1, DMA2=0). If I set the BIOS settings to that, then the card will make sound (after touching the mixer while playing audio).

According to perex (author of the opl3sa2 driver):

"The alsaconf tries to gather free resources (irq/dma/ports) from the /proc filesystem. It might be extended to gather this information also from /sys filesystem."
======================================================================
Relationships ID Summary
----------------------------------------------------------------------
related to 0000879 (snd_)opl3sa2 (isa) doesn't work (fails...
======================================================================

----------------------------------------------------------------------
ahaning - 08-12-05 00:00
----------------------------------------------------------------------
I searched bugzilla.kernel.org today and found a bug <
http://bugzilla.kernel.org/show_bug.cgi?id=4561 > that looks like it's related to this bug.

I tried the comment to list devices detected by pnp in /sys. Here's what I get:

# find */id | xargs cat
PNP0c02
PNP0c01
PNP0c02
NMX2210
NMX2220
PNP0a03
PNP0200
PNP0000
PNP0100
PNP0b00
PNP0303
PNP0c04
PNP0800
PNP0f13
PNP0501
PNP0510
PNP0401
#

The two NMX lines look promising. I tried the hack to enable the devices before inserting the module with no luck.

Anyway, thought I'd mention this.

----------------------------------------------------------------------
ahaning - 08-12-05 03:09
----------------------------------------------------------------------
Well, I've fiddled with this a bit more. After fixing the dma1 and dma2 entries, I can set the IRQ to 5, 7, or 11 in /etc/modprobe.conf and the OPL3SA2 driver is loaded.

Currently, I have the BIOS settings set to the default IRQ=11, DMA1=0, DMA2=1 like before. I've fixed dma1= and dma2= in /etc/modprobe.conf and if irq= is set to 5, 7, or 11, sound works (I just have to touch the PCM mixer while playing...).

Here's my /proc/dma entry as alsaconf detects it and after I fix it so sound sort of works. Maybe it's helpful?

Detected by alsaconf:

# cat /proc/dma
 0: CS4231 - 2
 1: CS4231 - 1
 4: cascade
#

Fixed by me so things kinda work:

# cat /proc/dma
 0: CS4231 - 1
 1: CS4231 - 2
 4: cascade
#

Here is /sys/module/snd_opl3sa2/parameters/dma1 and /sys/module/snd_opl3sa2/parameters/dma2 before and after:

dma1 before:

# cat /sys/module/snd_opl3sa2/parameters/dma1
1,65535,65535,65535,65535,65535,65535,65535

dma2 before:

# cat /sys/module/snd_opl3sa2/parameters/dma2
0,65535,65535,65535,65535,65535,65535,65535

dma1 after:

# cat /sys/module/snd_opl3sa2/parameters/dma1
0,65535,65535,65535,65535,65535,65535,65535

dma2 after:

# cat /sys/module/snd_opl3sa2/parameters/dma2
1,65535,65535,65535,65535,65535,65535,65535

Anyway. FWIW.

Thanks.

Issue History
Date Modified Username Field Change
======================================================================
08-10-05 03:39 ahaning New Issue
08-10-05 03:39 ahaning Distribution => Slackware 9.1 (but
it's not distribution-specific)

08-10-05 03:39 ahaning        Kernel Version            => 2.6.12.2        
08-10-05 13:26 perex          Status                   new => assigned     
08-10-05 13:26 perex          Assigned To               => perex           
08-10-05 13:26 perex          File Added: alsaconf                         
08-10-05 13:28 perex          Note Added: 0005747                          
08-10-05 13:29 perex          Project                  ALSA - driver => ALSA -
utils
08-10-05 13:30 perex          Relationship added       related to 0000879  
08-10-05 13:31 perex          Category                 1_OTHERS => alsaconf
08-10-05 14:55 ahaning        Note Added: 0005748                          
08-11-05 00:24 ahaning        Note Added: 0005752                          
08-11-05 23:59 ahaning        Note Added: 0005763                          
08-12-05 00:00 ahaning        Note Edited: 0005763                         
08-12-05 03:09 ahaning        Note Added: 0005764                          

======================================================================

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf