Skip to contentSkip to conversation

nvmet-rdma: Fix a possible uninitialized variable dereference

PATCH New Sagi Grimberg 4 participants 4 messages Mar 13, 2017 – Mar 14, 2017

Subsystems (3)
lore
Share & tools
lore

Sagi Grimberg

author maintainer
#0 lore raw

PATCH v2 1/1 nvmet-rdma: Fix a possible uninitialized variable dereference

When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it.

Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables.

Reported-by Yi Zhang <yizhan at redhat.com>
Reported-by Raju Rangoju <rajur at chelsio.com>
Signed-off-by Sagi Grimberg <sagi at grimberg.me>

---
- v1 broke srq, this one doesn't

 drivers/nvme/target/rdma.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/nvme/target/rdma.c +3 -5
index 9aa1da3778b3..ecc4fe862561 100644
@@ -703,11 +703,6 @@ static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue,
 {
 	u16 status;
 
-	cmd->queue = queue;
-	cmd->n_rdma = 0;
-	cmd->req.port = queue->port;
-
-
 	ib_dma_sync_single_for_cpu(queue->dev->device,
 		cmd->cmd->sge[0].addr, cmd->cmd->sge[0].length,
 		DMA_FROM_DEVICE);
@@ -760,9 +755,12 @@ static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc)
 
 	cmd->queue = queue;
 	rsp = nvmet_rdma_get_rsp(queue);
+	rsp->queue = queue;
 	rsp->cmd = cmd;
 	rsp->flags = 0;
 	rsp->req.cmd = cmd->nvme_cmd;
+	rsp->req.port = queue->port;
+	rsp->n_rdma = 0;
 
 	if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) {
 		unsigned long flags;
Signature · 1 line
2.7.4
#1 lore raw

PATCH v2 1/1 nvmet-rdma: Fix a possible uninitialized variable dereference

Quoted 7 lines · Sagi Grimberg

When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it.

Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables.

Looks good,

Reviewed-by Christoph Hellwig <hch at lst.de>
#2 lore raw

PATCH v2 1/1 nvmet-rdma: Fix a possible uninitialized variable dereference

In reply to Sagi Grimberg

Patch looks good.

Tested-by Raju Rangoju <rajur at chelsio.com>

-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Sagi Grimberg
Sent: 13 March 2017 19:10
To: linux-nvme at lists.infradead.org; linux-rdma at vger.kernel.org
Cc: Christoph Hellwig <hch at lst.de>
Subject: [PATCH v2] nvmet-rdma: Fix a possible uninitialized variable dereference

When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it.

Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables.

Reported-by Yi Zhang <yizhan at redhat.com>
Reported-by Raju Rangoju <rajur at chelsio.com>
Signed-off-by Sagi Grimberg <sagi at grimberg.me>

---
- v1 broke srq, this one doesn't

 drivers/nvme/target/rdma.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/nvme/target/rdma.c +3 -5
@@ -703,11 +703,6 @@ static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue,  {
 	u16 status;
 
-	cmd->queue = queue;
-	cmd->n_rdma = 0;
-	cmd->req.port = queue->port;
-
-
 	ib_dma_sync_single_for_cpu(queue->dev->device,
 		cmd->cmd->sge[0].addr, cmd->cmd->sge[0].length,
 		DMA_FROM_DEVICE);
@@ -760,9 +755,12 @@ static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc)
 
 	cmd->queue = queue;
 	rsp = nvmet_rdma_get_rsp(queue);
+	rsp->queue = queue;
 	rsp->cmd = cmd;
 	rsp->flags = 0;
 	rsp->req.cmd = cmd->nvme_cmd;
+	rsp->req.port = queue->port;
+	rsp->n_rdma = 0;
 
 	if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) {
 		unsigned long flags;

--
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo at vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html

#3 lore raw

PATCH v2 1/1 nvmet-rdma: Fix a possible uninitialized variable dereference

In reply to Sagi Grimberg

Thanks Sagi

Tested-by Yi Zhang <yizhan at redhat.com>

Best Regards,
Yi Zhang

----- Original Message -----
From: "Sagi Grimberg" <[email protected]>
To: linux-nvme at lists.infradead.org, linux-rdma at vger.kernel.org
Cc: "Christoph Hellwig" <hch at lst.de>
Sent: Monday, March 13, 2017 9:39:41 PM
Subject: [PATCH v2] nvmet-rdma: Fix a possible uninitialized variable dereference

When handling a new recv command, we grab a new rsp resource and check for the queue state being live. In case the queue is not in live state, we simply restore the rsp back to the free list. However in this flow we didn't set rsp->queue yet, so we cannot dereference it.

Instead, make sure to initialize rsp->queue (and other rsp members) as soon as possible so we won't reference uninitialized variables.

Reported-by Yi Zhang <yizhan at redhat.com>
Reported-by Raju Rangoju <rajur at chelsio.com>
Signed-off-by Sagi Grimberg <sagi at grimberg.me>

---
- v1 broke srq, this one doesn't

 drivers/nvme/target/rdma.c | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)
drivers/nvme/target/rdma.c +3 -5
index 9aa1da3778b3..ecc4fe862561 100644
@@ -703,11 +703,6 @@ static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue,
 {
 	u16 status;
 
-	cmd->queue = queue;
-	cmd->n_rdma = 0;
-	cmd->req.port = queue->port;
-
-
 	ib_dma_sync_single_for_cpu(queue->dev->device,
 		cmd->cmd->sge[0].addr, cmd->cmd->sge[0].length,
 		DMA_FROM_DEVICE);
@@ -760,9 +755,12 @@ static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc)
 
 	cmd->queue = queue;
 	rsp = nvmet_rdma_get_rsp(queue);
+	rsp->queue = queue;
 	rsp->cmd = cmd;
 	rsp->flags = 0;
 	rsp->req.cmd = cmd->nvme_cmd;
+	rsp->req.port = queue->port;
+	rsp->n_rdma = 0;
 
 	if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) {
 		unsigned long flags;
Signature · 7 lines
2.7.4


_______________________________________________
Linux-nvme mailing list
Linux-nvme at lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-nvme