5.15.4-rc1 review

This is the start of the stable review cycle for the 5.15.4 release. There are 20 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.

Responses should be made by Sun, 21 Nov 2021 17:14:35 +0000. Anything received after that time might be too late.

The whole patch series can be found in one patch at:

	https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.15.4-rc1.gz

or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.15.y
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <[email protected]>

    Linux 5.15.4-rc1

Rafael J. Wysocki <[email protected]>
Revert "ACPI: scan: Release PM resources blocked by unused objects"

Subbaraman Narayanamurthy <[email protected]>
thermal: Fix NULL pointer dereferences in of_thermal_ functions

Greg Thelen <[email protected]>
perf/core: Avoid put_page() when GUP fails

Marc Zyngier <[email protected]>
PCI: Add MSI masking quirk for Nvidia ION AHCI

Marc Zyngier <[email protected]>
PCI/MSI: Deal with devices lying about their MSI mask capability

Sven Schnelle <[email protected]>
parisc/entry: fix trace test in syscall exit path

Nicholas Flintham <[email protected]>
Bluetooth: btusb: Add support for TP-Link UB500 Adapter

Xie Yongji <[email protected]>
loop: Use blk_validate_block_size() to validate block size

Xie Yongji <[email protected]>
block: Add a helper to validate the block size

Kees Cook <[email protected]>
fortify: Explicitly disable Clang support

Johannes Thumshirn <[email protected]>
btrfs: zoned: allow preallocation for relocation inodes

Johannes Thumshirn <[email protected]>
btrfs: check for relocation inodes on zoned btrfs in should_nocow

Johannes Thumshirn <[email protected]>
btrfs: zoned: use regular writes for relocation

Johannes Thumshirn <[email protected]>
btrfs: zoned: only allow one process to add pages to a relocation inode

Johannes Thumshirn <[email protected]>
btrfs: zoned: add a dedicated data relocation block group

Johannes Thumshirn <[email protected]>
btrfs: introduce btrfs_is_data_reloc_root

David Woodhouse <[email protected]>
KVM: Fix steal time asm constraints

Greg Kroah-Hartman <[email protected]>
Revert "drm: fb_helper: fix CONFIG_FB dependency"

Greg Kroah-Hartman <[email protected]>
Revert "drm: fb_helper: improve CONFIG_FB dependency"

Guenter Roeck <[email protected]>
string: uninline memcpy_and_pad

-------------

Diffstat:

 Makefile                     |  4 ++--
 arch/parisc/kernel/entry.S   |  2 +-
 arch/x86/kvm/x86.c           |  6 ++---
 drivers/acpi/glue.c          | 25 --------------------
 drivers/acpi/internal.h      |  1 -
 drivers/acpi/scan.c          |  6 -----
 drivers/block/loop.c         | 17 ++------------
 drivers/bluetooth/btusb.c    |  4 ++++
 drivers/gpu/drm/Kconfig      |  5 ++--
 drivers/pci/msi.c            |  3 +++
 drivers/pci/quirks.c         |  6 +++++
 drivers/thermal/thermal_of.c |  9 ++++---
 fs/btrfs/block-group.c       |  1 +
 fs/btrfs/ctree.h             | 12 ++++++++++
 fs/btrfs/disk-io.c           |  3 ++-
 fs/btrfs/extent-tree.c       | 56 +++++++++++++++++++++++++++++++++++++++++---
 fs/btrfs/extent_io.c         | 11 +++++++++
 fs/btrfs/inode.c             | 29 +++++++++++++----------
 fs/btrfs/relocation.c        | 38 +++---------------------------
 fs/btrfs/zoned.c             | 21 +++++++++++++++++
 fs/btrfs/zoned.h             |  3 +++
 include/linux/blkdev.h       |  8 +++++++
 include/linux/pci.h          |  2 ++
 include/linux/string.h       | 19 ++-------------
 kernel/events/core.c         | 10 ++++----
 lib/string_helpers.c         | 20 ++++++++++++++++
 security/Kconfig             |  3 +++
 27 files changed, 193 insertions(+), 131 deletions(-)

From: Guenter Roeck <[email protected]>

commit 5c4e0a21fae877a7ef89be6dcc6263ec672372b8 upstream.

When building m68k:allmodconfig, recent versions of gcc generate the following error if the length of UTS_RELEASE is less than 8 bytes.

In function 'memcpy_and_pad',
inlined from 'nvmet_execute_disc_identify' at
drivers/nvme/target/discovery.c:268:2: arch/m68k/include/asm/string.h:72:25: error:
'__builtin_memcpy' reading 8 bytes from a region of size 7

Discussions around the problem suggest that this only happens if an architecture does not provide strlen(), if -ffreestanding is provided as compiler option, and if CONFIG_FORTIFY_SOURCE=n. All of this is the case for m68k. The exact reasons are unknown, but seem to be related to the ability of the compiler to evaluate the return value of strlen() and the resulting execution flow in memcpy_and_pad(). It would be possible to work around the problem by using sizeof(UTS_RELEASE) instead of strlen(UTS_RELEASE), but that would only postpone the problem until the function is called in a similar way. Uninline memcpy_and_pad() instead to solve the problem for good.

---
 include/linux/string.h |   19 ++-----------------
 lib/string_helpers.c   |   20 ++++++++++++++++++++
 2 files changed, 22 insertions(+), 17 deletions(-)

@@ -262,23 +262,8 @@ void __write_overflow(void) __compiletim
 #include <linux/fortify-string.h>
 #endif
 
-/**
- * memcpy_and_pad - Copy one buffer to another with padding
- * @dest: Where to copy to
- * @dest_len: The destination buffer size
- * @src: Where to copy from
- * @count: The number of bytes to copy
- * @pad: Character to use for padding if space is left in destination.
- */
-static inline void memcpy_and_pad(void *dest, size_t dest_len,
-				  const void *src, size_t count, int pad)
-{
-	if (dest_len > count) {
-		memcpy(dest, src, count);
-		memset(dest + count, pad,  dest_len - count);
-	} else
-		memcpy(dest, src, dest_len);
-}
+void memcpy_and_pad(void *dest, size_t dest_len, const void *src, size_t count,
+		    int pad);
 
 /**
  * str_has_prefix - Test if a string has a given prefix

@@ -696,3 +696,23 @@ void kfree_strarray(char **array, size_t
 	kfree(array);
 }
 EXPORT_SYMBOL_GPL(kfree_strarray);
+
+/**
+ * memcpy_and_pad - Copy one buffer to another with padding
+ * @dest: Where to copy to
+ * @dest_len: The destination buffer size
+ * @src: Where to copy from
+ * @count: The number of bytes to copy
+ * @pad: Character to use for padding if space is left in destination.
+ */
+void memcpy_and_pad(void *dest, size_t dest_len, const void *src, size_t count,
+		    int pad)
+{
+	if (dest_len > count) {
+		memcpy(dest, src, count);
+		memset(dest + count, pad,  dest_len - count);
+	} else {
+		memcpy(dest, src, dest_len);
+	}
+}
+EXPORT_SYMBOL(memcpy_and_pad);

From: Greg Kroah-Hartman <[email protected]>

This reverts commit 94e18f5a5dd1b5e3b89c665fc5ff780858b1c9f6 which is commit 9d6366e743f37d36ef69347924ead7bcc596076e upstream.

It causes some build problems as reported by Jiri.

---
 drivers/gpu/drm/Kconfig |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

@@ -102,8 +102,9 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
 
 config DRM_FBDEV_EMULATION
 	bool "Enable legacy fbdev support for your modesetting driver"
-	depends on DRM_KMS_HELPER
-	depends on FB=y || FB=DRM_KMS_HELPER
+	depends on DRM
+	depends on FB=y || FB=DRM
+	select DRM_KMS_HELPER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT

From: Greg Kroah-Hartman <[email protected]>

This reverts commit c95380ba527ae0aee29b2a133c5d0c481d472759 which is commit 606b102876e3741851dfb09d53f3ee57f650a52c upstream.

It causes some build problems as reported by Jiri.

---
 drivers/gpu/drm/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -103,7 +103,7 @@ config DRM_DEBUG_DP_MST_TOPOLOGY_REFS
 config DRM_FBDEV_EMULATION
 	bool "Enable legacy fbdev support for your modesetting driver"
 	depends on DRM
-	depends on FB=y || FB=DRM
+	depends on FB
 	select DRM_KMS_HELPER
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA

From: David Woodhouse <[email protected]>

commit 964b7aa0b040bdc6ec1c543ee620cda3f8b4c68a upstream.

In 64-bit mode, x86 instruction encoding allows us to use the low 8 bits of any GPR as an 8-bit operand. In 32-bit mode, however, we can only use the [abcd] registers. For which, GCC has the "q" constraint instead of the less restrictive "r".

Also fix st->preempted, which is an input/output operand rather than an input.

Message-Id: <[email protected]>

---
 arch/x86/kvm/x86.c |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

@@ -3242,9 +3242,9 @@ static void record_steal_time(struct kvm
 			     "xor %1, %1\n"
 			     "2:\n"
 			     _ASM_EXTABLE_UA(1b, 2b)
-			     : "+r" (st_preempted),
-			       "+&r" (err)
-			     : "m" (st->preempted));
+			     : "+q" (st_preempted),
+			       "+&r" (err),
+			       "+m" (st->preempted));
 		if (err)
 			goto out;
 

From: Johannes Thumshirn <[email protected]>

commit 37f00a6d2e9c97d6e7b5c3d47c49b714c3d0b99f upstream

There are several places in our codebase where we check if a root is the root of the data reloc tree and subsequent patches will introduce more.

Factor out the check into a small helper function instead of open coding it multiple times.

---
 fs/btrfs/ctree.h       |    5 +++++
 fs/btrfs/disk-io.c     |    2 +-
 fs/btrfs/extent-tree.c |    2 +-
 fs/btrfs/inode.c       |   19 ++++++++-----------
 fs/btrfs/relocation.c  |    3 +--
 5 files changed, 16 insertions(+), 15 deletions(-)

@@ -3842,6 +3842,11 @@ static inline bool btrfs_is_zoned(const
 	return fs_info->zoned != 0;
 }
 
+static inline bool btrfs_is_data_reloc_root(const struct btrfs_root *root)
+{
+	return root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID;
+}
+
 /*
  * We use page status Private2 to indicate there is an ordered extent with
  * unfinished IO.

@@ -1500,7 +1500,7 @@ static int btrfs_init_fs_root(struct btr
 		goto fail;
 
 	if (root->root_key.objectid != BTRFS_TREE_LOG_OBJECTID &&
-	    root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID) {
+	    !btrfs_is_data_reloc_root(root)) {
 		set_bit(BTRFS_ROOT_SHAREABLE, &root->state);
 		btrfs_check_and_init_root_item(&root->root_item);
 	}

@@ -2376,7 +2376,7 @@ int btrfs_cross_ref_exist(struct btrfs_r
 
 out:
 	btrfs_free_path(path);
-	if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID)
+	if (btrfs_is_data_reloc_root(root))
 		WARN_ON(ret > 0);
 	return ret;
 }

@@ -1151,7 +1151,7 @@ static noinline int cow_file_range(struc
 	 * fails during the stage where it updates the bytenr of file extent
 	 * items.
 	 */
-	if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID)
+	if (btrfs_is_data_reloc_root(root))
 		min_alloc_size = num_bytes;
 	else
 		min_alloc_size = fs_info->sectorsize;

@@ -1187,8 +1187,7 @@ static noinline int cow_file_range(struc
 		if (ret)
 			goto out_drop_extent_cache;
 
-		if (root->root_key.objectid ==
-		    BTRFS_DATA_RELOC_TREE_OBJECTID) {
+		if (btrfs_is_data_reloc_root(root)) {
 			ret = btrfs_reloc_clone_csums(inode, start,
 						      cur_alloc_size);
 			/*

@@ -1504,8 +1503,7 @@ static int fallback_to_cow(struct btrfs_
 			   int *page_started, unsigned long *nr_written)
 {
 	const bool is_space_ino = btrfs_is_free_space_inode(inode);
-	const bool is_reloc_ino = (inode->root->root_key.objectid ==
-				   BTRFS_DATA_RELOC_TREE_OBJECTID);
+	const bool is_reloc_ino = btrfs_is_data_reloc_root(inode->root);
 	const u64 range_bytes = end + 1 - start;
 	struct extent_io_tree *io_tree = &inode->io_tree;
 	u64 range_start = start;

@@ -1867,8 +1865,7 @@ out_check:
 			btrfs_dec_nocow_writers(fs_info, disk_bytenr);
 		nocow = false;
 
-		if (root->root_key.objectid ==
-		    BTRFS_DATA_RELOC_TREE_OBJECTID)
+		if (btrfs_is_data_reloc_root(root))
 			/*
 			 * Error handled later, as we must prevent
 			 * extent_clear_unlock_delalloc() in error handler

@@ -2207,7 +2204,7 @@ void btrfs_clear_delalloc_extent(struct
 		if (btrfs_is_testing(fs_info))
 			return;
 
-		if (root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID &&
+		if (!btrfs_is_data_reloc_root(root) &&
 		    do_list && !(state->state & EXTENT_NORESERVE) &&
 		    (*bits & EXTENT_CLEAR_DATA_RESV))
 			btrfs_free_reserved_data_space_noquota(fs_info, len);

@@ -2532,7 +2529,7 @@ blk_status_t btrfs_submit_data_bio(struc
 		goto mapit;
 	} else if (async && !skip_sum) {
 		/* csum items have already been cloned */
-		if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID)
+		if (btrfs_is_data_reloc_root(root))
 			goto mapit;
 		/* we're doing a write, do the async checksumming */
 		ret = btrfs_wq_submit_bio(inode, bio, mirror_num, bio_flags,

@@ -3304,7 +3301,7 @@ unsigned int btrfs_verify_data_csum(stru
 		u64 file_offset = pg_off + page_offset(page);
 		int ret;
 
-		if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID &&
+		if (btrfs_is_data_reloc_root(root) &&
 		    test_range_bit(io_tree, file_offset,
 				   file_offset + sectorsize - 1,
 				   EXTENT_NODATASUM, 1, NULL)) {

@@ -4005,7 +4002,7 @@ noinline int btrfs_update_inode(struct b
 	 * without delay
 	 */
 	if (!btrfs_is_free_space_inode(inode)
-	    && root->root_key.objectid != BTRFS_DATA_RELOC_TREE_OBJECTID
+	    && !btrfs_is_data_reloc_root(root)
 	    && !test_bit(BTRFS_FS_LOG_RECOVERING, &fs_info->flags)) {
 		btrfs_update_root_times(trans, root);
 

@@ -4386,8 +4386,7 @@ int btrfs_reloc_cow_block(struct btrfs_t
 	if (!rc)
 		return 0;
 
-	BUG_ON(rc->stage == UPDATE_DATA_PTRS &&
-	       root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID);
+	BUG_ON(rc->stage == UPDATE_DATA_PTRS && btrfs_is_data_reloc_root(root));
 
 	level = btrfs_header_level(buf);
 	if (btrfs_header_generation(buf) <=

From: Johannes Thumshirn <[email protected]>

commit c2707a25562343511bf9a3a6a636a16a822204eb upstream

Relocation in a zoned filesystem can fail with a transaction abort with error -22 (EINVAL). This happens because the relocation code assumes that the extents we relocated the data to have the same size the source extents had and ensures this by preallocating the extents.

But in a zoned filesystem we currently can't preallocate the extents as this would break the sequential write required rule. Therefore it can happen that the writeback process kicks in while we're still adding pages to a delalloc range and starts writing out dirty pages.

This then creates destination extents that are smaller than the source extents, triggering the following safety check in get_new_location():

1034 if (num_bytes != btrfs_file_extent_disk_num_bytes(leaf, fi)) {
1035 ret = -EINVAL;
1036 goto out;
1037 }

Temporarily create a dedicated block group for the relocation process, so no non-relocation data writes can interfere with the relocation writes.

This is needed that we can switch the relocation process on a zoned filesystem from the REQ_OP_ZONE_APPEND writing we use for data to a scheme like in a non-zoned filesystem using REQ_OP_WRITE and preallocation.

---
 fs/btrfs/block-group.c |    1 
 fs/btrfs/ctree.h       |    7 ++++++
 fs/btrfs/disk-io.c     |    1 
 fs/btrfs/extent-tree.c |   54 +++++++++++++++++++++++++++++++++++++++++++++++--
 fs/btrfs/zoned.c       |   10 +++++++++
 fs/btrfs/zoned.h       |    3 ++
 6 files changed, 74 insertions(+), 2 deletions(-)

@@ -902,6 +902,7 @@ int btrfs_remove_block_group(struct btrf
 	spin_unlock(&cluster->refill_lock);
 
 	btrfs_clear_treelog_bg(block_group);
+	btrfs_clear_data_reloc_bg(block_group);
 
 	path = btrfs_alloc_path();
 	if (!path) {

@@ -1017,6 +1017,13 @@ struct btrfs_fs_info {
 	spinlock_t treelog_bg_lock;
 	u64 treelog_bg;
 
+	/*
+	 * Start of the dedicated data relocation block group, protected by
+	 * relocation_bg_lock.
+	 */
+	spinlock_t relocation_bg_lock;
+	u64 data_reloc_bg;
+
 #ifdef CONFIG_BTRFS_FS_REF_VERIFY
 	spinlock_t ref_verify_lock;
 	struct rb_root block_tree;

@@ -2883,6 +2883,7 @@ void btrfs_init_fs_info(struct btrfs_fs_
 	spin_lock_init(&fs_info->buffer_lock);
 	spin_lock_init(&fs_info->unused_bgs_lock);
 	spin_lock_init(&fs_info->treelog_bg_lock);
+	spin_lock_init(&fs_info->relocation_bg_lock);
 	rwlock_init(&fs_info->tree_mod_log_lock);
 	mutex_init(&fs_info->unused_bg_unpin_mutex);
 	mutex_init(&fs_info->reclaim_bgs_lock);

@@ -1530,3 +1530,13 @@ struct btrfs_device *btrfs_zoned_get_dev
 
 	return device;
 }
+
+void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg)
+{
+	struct btrfs_fs_info *fs_info = bg->fs_info;
+
+	spin_lock(&fs_info->relocation_bg_lock);
+	if (fs_info->data_reloc_bg == bg->start)
+		fs_info->data_reloc_bg = 0;
+	spin_unlock(&fs_info->relocation_bg_lock);
+}

@@ -66,6 +66,7 @@ int btrfs_sync_zone_write_pointer(struct
 				  u64 physical_start, u64 physical_pos);
 struct btrfs_device *btrfs_zoned_get_device(struct btrfs_fs_info *fs_info,
 					    u64 logical, u64 length);
+void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg);
 #else /* CONFIG_BLK_DEV_ZONED */
 static inline int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos,
 				     struct blk_zone *zone)

@@ -199,6 +200,8 @@ static inline struct btrfs_device *btrfs
 	return ERR_PTR(-EOPNOTSUPP);
 }
 
+static inline void btrfs_clear_data_reloc_bg(struct btrfs_block_group *bg) { }
+
 #endif
 
 static inline bool btrfs_dev_is_sequential(struct btrfs_device *device, u64 pos)

From: Johannes Thumshirn <[email protected]>

commit 35156d852762b58855f513b4f8bb7f32d69dc9c5 upstream

Don't allow more than one process to add pages to a relocation inode on a zoned filesystem, otherwise we cannot guarantee the sequential write rule once we're filling preallocated extents on a zoned filesystem.

---
 fs/btrfs/extent_io.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -5120,6 +5120,9 @@ int extent_write_locked_range(struct ino
 int extent_writepages(struct address_space *mapping,
 		      struct writeback_control *wbc)
 {
+	struct inode *inode = mapping->host;
+	const bool data_reloc = btrfs_is_data_reloc_root(BTRFS_I(inode)->root);
+	const bool zoned = btrfs_is_zoned(BTRFS_I(inode)->root->fs_info);
 	int ret = 0;
 	struct extent_page_data epd = {
 		.bio_ctrl = { 0 },

@@ -5127,7 +5130,15 @@ int extent_writepages(struct address_spa
 		.sync_io = wbc->sync_mode == WB_SYNC_ALL,
 	};
 
+	/*
+	 * Allow only a single thread to do the reloc work in zoned mode to
+	 * protect the write pointer updates.
+	 */
+	if (data_reloc && zoned)
+		btrfs_inode_lock(inode, 0);
 	ret = extent_write_cache_pages(mapping, wbc, &epd);
+	if (data_reloc && zoned)
+		btrfs_inode_unlock(inode, 0);
 	ASSERT(ret <= 0);
 	if (ret < 0) {
 		end_write_bio(&epd, ret);

From: Johannes Thumshirn <[email protected]>

commit e6d261e3b1f777b499ce8f535ed44dd1b69278b7 upstream

Now that we have a dedicated block group for relocation, we can use REQ_OP_WRITE instead of REQ_OP_ZONE_APPEND for writing out the data on relocation.

---
 fs/btrfs/zoned.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

@@ -1304,6 +1304,17 @@ bool btrfs_use_zone_append(struct btrfs_
 	if (!is_data_inode(&inode->vfs_inode))
 		return false;
 
+	/*
+	 * Using REQ_OP_ZONE_APPNED for relocation can break assumptions on the
+	 * extent layout the relocation code has.
+	 * Furthermore we have set aside own block-group from which only the
+	 * relocation "process" can allocate and make sure only one process at a
+	 * time can add pages to an extent that gets relocated, so it's safe to
+	 * use regular REQ_OP_WRITE for this special case.
+	 */
+	if (btrfs_is_data_reloc_root(inode->root))
+		return false;
+
 	cache = btrfs_lookup_block_group(fs_info, start);
 	ASSERT(cache);
 	if (!cache)

From: Johannes Thumshirn <[email protected]>

commit 2adada886b26e998b5a624e72f0834ebfdc54cc7 upstream

Prepare for allowing preallocation for relocation inodes.

---
 fs/btrfs/inode.c |   10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

@@ -1945,7 +1945,15 @@ int btrfs_run_delalloc_range(struct btrf
 	const bool zoned = btrfs_is_zoned(inode->root->fs_info);
 
 	if (should_nocow(inode, start, end)) {
-		ASSERT(!zoned);
+		/*
+		 * Normally on a zoned device we're only doing COW writes, but
+		 * in case of relocation on a zoned filesystem we have taken
+		 * precaution, that we're only writing sequentially. It's safe
+		 * to use run_delalloc_nocow() here, like for  regular
+		 * preallocated inodes.
+		 */
+		ASSERT(!zoned ||
+		       (zoned && btrfs_is_data_reloc_root(inode->root)));
 		ret = run_delalloc_nocow(inode, locked_page, start, end,
 					 page_started, nr_written);
 	} else if (!inode_can_compress(inode) ||

From: Johannes Thumshirn <[email protected]>

commit 960a3166aed015887cd54423a6589ae4d0b65bd5 upstream

Now that we use a dedicated block group and regular writes for data relocation, we can preallocate the space needed for a relocated inode, just like we do in regular mode.

Essentially this reverts commit 32430c614844 ("btrfs: zoned: enable relocation on a zoned filesystem") as it is not needed anymore.

---
 fs/btrfs/relocation.c |   35 ++---------------------------------
 1 file changed, 2 insertions(+), 33 deletions(-)

@@ -2852,31 +2852,6 @@ static noinline_for_stack int prealloc_f
 	if (ret)
 		return ret;
 
-	/*
-	 * On a zoned filesystem, we cannot preallocate the file region.
-	 * Instead, we dirty and fiemap_write the region.
-	 */
-	if (btrfs_is_zoned(inode->root->fs_info)) {
-		struct btrfs_root *root = inode->root;
-		struct btrfs_trans_handle *trans;
-
-		end = cluster->end - offset + 1;
-		trans = btrfs_start_transaction(root, 1);
-		if (IS_ERR(trans))
-			return PTR_ERR(trans);
-
-		inode->vfs_inode.i_ctime = current_time(&inode->vfs_inode);
-		i_size_write(&inode->vfs_inode, end);
-		ret = btrfs_update_inode(trans, root, inode);
-		if (ret) {
-			btrfs_abort_transaction(trans, ret);
-			btrfs_end_transaction(trans);
-			return ret;
-		}
-
-		return btrfs_end_transaction(trans);
-	}
-
 	btrfs_inode_lock(&inode->vfs_inode, 0);
 	for (nr = 0; nr < cluster->nr; nr++) {
 		start = cluster->boundary[nr] - offset;

@@ -3084,7 +3059,6 @@ release_page:
 static int relocate_file_extent_cluster(struct inode *inode,
 					struct file_extent_cluster *cluster)
 {
-	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	u64 offset = BTRFS_I(inode)->index_cnt;
 	unsigned long index;
 	unsigned long last_index;

@@ -3114,8 +3088,6 @@ static int relocate_file_extent_cluster(
 	for (index = (cluster->start - offset) >> PAGE_SHIFT;
 	     index <= last_index && !ret; index++)
 		ret = relocate_one_page(inode, ra, cluster, &cluster_nr, index);
-	if (btrfs_is_zoned(fs_info) && !ret)
-		ret = btrfs_wait_ordered_range(inode, 0, (u64)-1);
 	if (ret == 0)
 		WARN_ON(cluster_nr != cluster->nr);
 out:

@@ -3770,12 +3742,8 @@ static int __insert_orphan_inode(struct
 	struct btrfs_path *path;
 	struct btrfs_inode_item *item;
 	struct extent_buffer *leaf;
-	u64 flags = BTRFS_INODE_NOCOMPRESS | BTRFS_INODE_PREALLOC;
 	int ret;
 
-	if (btrfs_is_zoned(trans->fs_info))
-		flags &= ~BTRFS_INODE_PREALLOC;
-
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;

@@ -3790,7 +3758,8 @@ static int __insert_orphan_inode(struct
 	btrfs_set_inode_generation(leaf, item, 1);
 	btrfs_set_inode_size(leaf, item, 0);
 	btrfs_set_inode_mode(leaf, item, S_IFREG | 0600);
-	btrfs_set_inode_flags(leaf, item, flags);
+	btrfs_set_inode_flags(leaf, item, BTRFS_INODE_NOCOMPRESS |
+					  BTRFS_INODE_PREALLOC);
 	btrfs_mark_buffer_dirty(leaf);
 out:
 	btrfs_free_path(path);

From: Kees Cook <[email protected]>

commit a52f8a59aef46b59753e583bf4b28fccb069ce64 upstream.

Clang has never correctly compiled the FORTIFY_SOURCE defenses due to a couple bugs:

	Eliding inlines with matching __builtin_* names
	https://bugs.llvm.org/show_bug.cgi?id=50322

	Incorrect __builtin_constant_p() of some globals
	https://bugs.llvm.org/show_bug.cgi?id=41459

In the process of making improvements to the FORTIFY_SOURCE defenses, the first (silent) bug (coincidentally) becomes worked around, but exposes the latter which breaks the build. As such, Clang must not be used with CONFIG_FORTIFY_SOURCE until at least latter bug is fixed (in Clang 13), and the fortify routines have been rearranged.

Update the Kconfig to reflect the reality of the current situation.

---
 security/Kconfig |    3 +++
 1 file changed, 3 insertions(+)

@@ -191,6 +191,9 @@ config HARDENED_USERCOPY_PAGESPAN
 config FORTIFY_SOURCE
 	bool "Harden common str/mem functions against buffer overflows"
 	depends on ARCH_HAS_FORTIFY_SOURCE
+	# https://bugs.llvm.org/show_bug.cgi?id=50322
+	# https://bugs.llvm.org/show_bug.cgi?id=41459
+	depends on !CC_IS_CLANG
 	help
 	  Detect overflows of buffers in common string and memory functions
 	  where the compiler can determine and validate the buffer sizes.

From: Xie Yongji <[email protected]>

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream.

There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that.

---
 include/linux/blkdev.h |    8 ++++++++
 1 file changed, 8 insertions(+)

@@ -235,6 +235,14 @@ struct request {
 	void *end_io_data;
 };
 
+static inline int blk_validate_block_size(unsigned int bsize)
+{
+	if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
+		return -EINVAL;
+
+	return 0;
+}
+
 static inline bool blk_op_is_passthrough(unsigned int op)
 {
 	op &= REQ_OP_MASK;

From: Xie Yongji <[email protected]>

commit af3c570fb0df422b4906ebd11c1bf363d89961d5 upstream.

Remove loop_validate_block_size() and use the block layer helper to validate block size.

---
 drivers/block/loop.c |   17 ++---------------
 1 file changed, 2 insertions(+), 15 deletions(-)

@@ -273,19 +273,6 @@ static void __loop_update_dio(struct loo
 }
 
 /**
- * loop_validate_block_size() - validates the passed in block size
- * @bsize: size to validate
- */
-static int
-loop_validate_block_size(unsigned short bsize)
-{
-	if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize))
-		return -EINVAL;
-
-	return 0;
-}
-
-/**
  * loop_set_size() - sets device size and notifies userspace
  * @lo: struct loop_device to set the size for
  * @size: new size of the loop device

@@ -1236,7 +1223,7 @@ static int loop_configure(struct loop_de
 	}
 
 	if (config->block_size) {
-		error = loop_validate_block_size(config->block_size);
+		error = blk_validate_block_size(config->block_size);
 		if (error)
 			goto out_unlock;
 	}

@@ -1759,7 +1746,7 @@ static int loop_set_block_size(struct lo
 	if (lo->lo_state != Lo_bound)
 		return -ENXIO;
 
-	err = loop_validate_block_size(arg);
+	err = blk_validate_block_size(arg);
 	if (err)
 		return err;
 

From: Nicholas Flintham <[email protected]>

commit 4fd6d490796171bf786090fee782e252186632e4 upstream.

Add support for TP-Link UB500 Adapter (RTL8761B)

* /sys/kernel/debug/usb/devices

T:  Bus=01 Lev=02 Prnt=05 Port=01 Cnt=01 Dev#= 78 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=2357 ProdID=0604 Rev= 2.00
S:  Manufacturer=
S:  Product=TP-Link UB500 Adapter
S:  SerialNumber=E848B8C82000
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms

---
 drivers/bluetooth/btusb.c |    4 ++++
 1 file changed, 4 insertions(+)

@@ -433,6 +433,10 @@ static const struct usb_device_id blackl
 	{ USB_DEVICE(0x0bda, 0xb009), .driver_info = BTUSB_REALTEK },
 	{ USB_DEVICE(0x2ff8, 0xb011), .driver_info = BTUSB_REALTEK },
 
+	/* Additional Realtek 8761B Bluetooth devices */
+	{ USB_DEVICE(0x2357, 0x0604), .driver_info = BTUSB_REALTEK |
+						     BTUSB_WIDEBAND_SPEECH },
+
 	/* Additional Realtek 8761BU Bluetooth devices */
 	{ USB_DEVICE(0x0b05, 0x190e), .driver_info = BTUSB_REALTEK |
 	  					     BTUSB_WIDEBAND_SPEECH },

From: Sven Schnelle <[email protected]>

commit 3ec18fc7831e7d79e2d536dd1f3bc0d3ba425e8a upstream.

commit 8779e05ba8aa ("parisc: Fix ptrace check on syscall return") fixed testing of TI_FLAGS. This uncovered a bug in the test mask. syscall_restore_rfi is only used when the kernel needs to exit to usespace with single or block stepping and the recovery counter enabled. The test however used _TIF_SYSCALL_TRACE_MASK, which includes a lot of bits that shouldn't be tested here.

Fix this by using TIF_SINGLESTEP and TIF_BLOCKSTEP directly.

I encountered this bug by enabling syscall tracepoints. Both in qemu and on real hardware. As soon as i enabled the tracepoint (sys_exit_read, but i guess it doesn't really matter which one), i got random page faults in userspace almost immediately.

---
 arch/parisc/kernel/entry.S |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

@@ -1835,7 +1835,7 @@ syscall_restore:
 
 	/* Are we being ptraced? */
 	LDREG	TI_FLAGS-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r19
-	ldi	_TIF_SYSCALL_TRACE_MASK,%r2
+	ldi	_TIF_SINGLESTEP|_TIF_BLOCKSTEP,%r2
 	and,COND(=)	%r19,%r2,%r0
 	b,n	syscall_restore_rfi
 

From: Marc Zyngier <[email protected]>

commit 2226667a145db2e1f314d7f57fd644fe69863ab9 upstream.

It appears that some devices are lying about their mask capability, pretending that they don't have it, while they actually do. The net result is that now that we don't enable MSIs on such endpoint.

Add a new per-device flag to deal with this. Further patches will make use of it, sadly.

---
 drivers/pci/msi.c   |    3 +++
 include/linux/pci.h |    2 ++
 2 files changed, 5 insertions(+)

@@ -477,6 +477,9 @@ msi_setup_entry(struct pci_dev *dev, int
 		goto out;
 
 	pci_read_config_word(dev, dev->msi_cap + PCI_MSI_FLAGS, &control);
+	/* Lies, damned lies, and MSIs */
+	if (dev->dev_flags & PCI_DEV_FLAGS_HAS_MSI_MASKING)
+		control |= PCI_MSI_FLAGS_MASKBIT;
 
 	entry->msi_attrib.is_msix	= 0;
 	entry->msi_attrib.is_64		= !!(control & PCI_MSI_FLAGS_64BIT);

@@ -233,6 +233,8 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_NO_FLR_RESET = (__force pci_dev_flags_t) (1 << 10),
 	/* Don't use Relaxed Ordering for TLPs directed at this device */
 	PCI_DEV_FLAGS_NO_RELAXED_ORDERING = (__force pci_dev_flags_t) (1 << 11),
+	/* Device does honor MSI masking despite saying otherwise */
+	PCI_DEV_FLAGS_HAS_MSI_MASKING = (__force pci_dev_flags_t) (1 << 12),
 };
 
 enum pci_irq_reroute_variant {

From: Marc Zyngier <[email protected]>

commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream.

The ION AHCI device pretends that MSI masking isn't a thing, while it actually implements it and needs MSIs to be unmasked to work. Add a quirk to that effect.

---
 drivers/pci/quirks.c |    6 ++++++
 1 file changed, 6 insertions(+)

@@ -5796,3 +5796,9 @@ static void apex_pci_fixup_class(struct
 }
 DECLARE_PCI_FIXUP_CLASS_HEADER(0x1ac1, 0x089a,
 			       PCI_CLASS_NOT_DEFINED, 8, apex_pci_fixup_class);
+
+static void nvidia_ion_ahci_fixup(struct pci_dev *pdev)
+{
+	pdev->dev_flags |= PCI_DEV_FLAGS_HAS_MSI_MASKING;
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, 0x0ab8, nvidia_ion_ahci_fixup);

From: Greg Thelen <[email protected]>

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU sampled virtual addresses to physical using get_user_page_fast_only() and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no page reference, but still initialize the output page pointer with an unreferenced page. In these error cases perf_virt_to_phys() calls put_page(). This causes page reference count underflow, which can lead to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only() returns a referenced page.

---
 kernel/events/core.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

@@ -7154,7 +7154,6 @@ void perf_output_sample(struct perf_outp
 static u64 perf_virt_to_phys(u64 virt)
 {
 	u64 phys_addr = 0;
-	struct page *p = NULL;
 
 	if (!virt)
 		return 0;

@@ -7173,14 +7172,15 @@ static u64 perf_virt_to_phys(u64 virt)
 		 * If failed, leave phys_addr as 0.
 		 */
 		if (current->mm != NULL) {
+			struct page *p;
+
 			pagefault_disable();
-			if (get_user_page_fast_only(virt, 0, &p))
+			if (get_user_page_fast_only(virt, 0, &p)) {
 				phys_addr = page_to_phys(p) + virt % PAGE_SIZE;
+				put_page(p);
+			}
 			pagefault_enable();
 		}
-
-		if (p)
-			put_page(p);
 	}
 
 	return phys_addr;

From: Subbaraman Narayanamurthy <[email protected]>

commit 96cfe05051fd8543cdedd6807ec59a0e6c409195 upstream.

of_parse_thermal_zones() parses the thermal-zones node and registers a thermal_zone device for each subnode. However, if a thermal zone is consuming a thermal sensor and that thermal sensor device hasn't probed yet, an attempt to set trip_point_*_temp for that thermal zone device can cause a NULL pointer dereference. Fix it.

console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
...

 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
 ...
 Call trace:
  of_thermal_set_trip_temp+0x40/0xc4
  trip_point_temp_store+0xc0/0x1dc
  dev_attr_store+0x38/0x88
  sysfs_kf_write+0x64/0xc0
  kernfs_fop_write_iter+0x108/0x1d0
  vfs_write+0x2f4/0x368
  ksys_write+0x7c/0xec
  __arm64_sys_write+0x20/0x30
  el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
  do_el0_svc+0x28/0xa0
  el0_svc+0x14/0x24
  el0_sync_handler+0x88/0xec
  el0_sync+0x1c0/0x200

While at it, fix the possible NULL pointer dereference in other functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(), of_thermal_get_trend().

---
 drivers/thermal/thermal_of.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

@@ -89,7 +89,7 @@ static int of_thermal_get_temp(struct th
 {
 	struct __thermal_zone *data = tz->devdata;
 
-	if (!data->ops->get_temp)
+	if (!data->ops || !data->ops->get_temp)
 		return -EINVAL;
 
 	return data->ops->get_temp(data->sensor_data, temp);

@@ -186,6 +186,9 @@ static int of_thermal_set_emul_temp(stru
 {
 	struct __thermal_zone *data = tz->devdata;
 
+	if (!data->ops || !data->ops->set_emul_temp)
+		return -EINVAL;
+
 	return data->ops->set_emul_temp(data->sensor_data, temp);
 }
 

@@ -194,7 +197,7 @@ static int of_thermal_get_trend(struct t
 {
 	struct __thermal_zone *data = tz->devdata;
 
-	if (!data->ops->get_trend)
+	if (!data->ops || !data->ops->get_trend)
 		return -EINVAL;
 
 	return data->ops->get_trend(data->sensor_data, trip, trend);

@@ -301,7 +304,7 @@ static int of_thermal_set_trip_temp(stru
 	if (trip >= data->ntrips || trip < 0)
 		return -EDOM;
 
-	if (data->ops->set_trip_temp) {
+	if (data->ops && data->ops->set_trip_temp) {
 		int ret;
 
 		ret = data->ops->set_trip_temp(data->sensor_data, trip, temp);

From: Rafael J. Wysocki <[email protected]>

commit 3b2b49e6dfdcf423506a771bf44cee842596351a upstream.

Revert commit c10383e8ddf4 ("ACPI: scan: Release PM resources blocked by unused objects"), because it causes boot issues to appear on some platforms.

---
 drivers/acpi/glue.c     |   25 -------------------------
 drivers/acpi/internal.h |    1 -
 drivers/acpi/scan.c     |    6 ------
 3 files changed, 32 deletions(-)

@@ -340,28 +340,3 @@ void acpi_device_notify_remove(struct de
 
 	acpi_unbind_one(dev);
 }
-
-int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used)
-{
-	struct acpi_device *adev = to_acpi_device(dev);
-
-	/*
-	 * Skip device objects with device IDs, because they may be in use even
-	 * if they are not companions of any physical device objects.
-	 */
-	if (adev->pnp.type.hardware_id)
-		return 0;
-
-	mutex_lock(&adev->physical_node_lock);
-
-	/*
-	 * Device objects without device IDs are not in use if they have no
-	 * corresponding physical device objects.
-	 */
-	if (list_empty(&adev->physical_node_list))
-		acpi_device_set_power(adev, ACPI_STATE_D3_COLD);
-
-	mutex_unlock(&adev->physical_node_lock);
-
-	return 0;
-}

@@ -117,7 +117,6 @@ bool acpi_device_is_battery(struct acpi_
 bool acpi_device_is_first_physical_node(struct acpi_device *adev,
 					const struct device *dev);
 int acpi_bus_register_early_device(int type);
-int acpi_dev_turn_off_if_unused(struct device *dev, void *not_used);
 
 /* --------------------------------------------------------------------------
                      Device Matching and Notification

@@ -2559,12 +2559,6 @@ int __init acpi_scan_init(void)
 		}
 	}
 
-	/*
-	 * Make sure that power management resources are not blocked by ACPI
-	 * device objects with no users.
-	 */
-	bus_for_each_dev(&acpi_bus_type, NULL, NULL, acpi_dev_turn_off_if_unused);
-
 	acpi_turn_off_unused_power_resources();
 
 	acpi_scan_initialized = true;

On ARCH_BRCMSTB using 32-bit and 64-bit ARM kernels:

Florian

5.15.4-rc1 Successfully Compiled and booted on my Raspberry PI 4b (8g) (bcm2711)

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah

Hello!

Results from Linaro's test farm.
No regressions on arm64, arm, x86_64, and i386.

## Build
* kernel: 5.15.4-rc1
* git: https://gitlab.com/Linaro/lkft/mirrors/stable/linux-stable-rc
* git branch: linux-5.15.y
* git commit: 9f5b4a585c82d545acbc198579edfa8991532019
* git describe: v5.15.3-21-g9f5b4a585c82
* test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.15.y/build/v5.15.3-21-g9f5b4a585c82

## No regressions (compared to v5.15.3)

## No fixes (compared to v5.15.3)

## Test result summary
total: 93274, pass: 79148, fail: 681, skip: 12567, xfail: 878

## Build Summary
* arc: 10 total, 10 passed, 0 failed
* arm: 260 total, 260 passed, 0 failed
* arm64: 42 total, 37 passed, 5 failed
* dragonboard-410c: 1 total, 1 passed, 0 failed
* hi6220-hikey: 1 total, 1 passed, 0 failed
* i386: 40 total, 37 passed, 3 failed
* juno-r2: 1 total, 1 passed, 0 failed
* mips: 37 total, 35 passed, 2 failed
* parisc: 14 total, 14 passed, 0 failed
* powerpc: 49 total, 44 passed, 5 failed
* riscv: 27 total, 25 passed, 2 failed
* s390: 22 total, 20 passed, 2 failed
* sh: 26 total, 24 passed, 2 failed
* sparc: 14 total, 14 passed, 0 failed
* x15: 1 total, 1 passed, 0 failed
* x86: 1 total, 1 passed, 0 failed
* x86_64: 42 total, 40 passed, 2 failed

## Test suites summary
* fwts
* igt-gpu-tools
* kselftest
* kselftest-android
* kselftest-arm64
* kselftest-bpf
* kselftest-breakpoints
* kselftest-capabilities
* kselftest-cgroup
* kselftest-clone3
* kselftest-core
* kselftest-cpu-hotplug
* kselftest-cpufreq
* kselftest-drivers
* kselftest-efivarfs
* kselftest-filesystems
* kselftest-firmware
* kselftest-fpu
* kselftest-futex
* kselftest-gpio
* kselftest-intel_pstate
* kselftest-ipc
* kselftest-ir
* kselftest-kcmp
* kselftest-kexec
* kselftest-kvm
* kselftest-lib
* kselftest-livepatch
* kselftest-lkdtm
* kselftest-membarrier
* kselftest-memfd
* kselftest-memory-hotplug
* kselftest-mincore
* kselftest-mount
* kselftest-mqueue
* kselftest-net
* kselftest-netfilter
* kselftest-nsfs
* kselftest-openat2
* kselftest-pid_namespace
* kselftest-pidfd
* kselftest-proc
* kselftest-pstore
* kselftest-ptrace
* kselftest-rseq
* kselftest-rtc
* kselftest-seccomp
* kselftest-sigaltstack
* kselftest-size
* kselftest-splice
* kselftest-static_keys
* kselftest-sync
* kselftest-sysctl
* kselftest-tc-testing
* kselftest-timens
* kselftest-timers
* kselftest-tmpfs
* kselftest-tpm2
* kselftest-user
* kselftest-vm
* kselftest-x86
* kselftest-zram
* kunit
* kvm-unit-tests
* libgpiod
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-loc[
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-open-posix-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* ltp-tracing-tests
* network-basic-tests
* packetdrill
* perf
* rcutorture
* ssuite
* v4l2-compliance

Greetings!

Daniel Díaz
[email protected]

Linaro LKFT
https://lkft.linaro.org

Hi Greg,

Looking good.

Run tested on:
- Intel Tiger Lake x86_64 (nuc11 i7-1165G7)
- Radxa ROCK Pi N10c (rk3399pro)

In addition build tested on:
- Allwinner A64
- Allwinner H3
- Allwinner H5
- Allwinner H6
- NXP iMX6
- NXP iMX8
- Qualcomm Dragonboard
- Rockchip RK3288
- Rockchip RK3328
- Samsung Exynos

Rudi

Build results:

	total: 154 pass: 154 fail: 0
Qemu test results:
	total: 482 pass: 482 fail: 0

Guenter

Built and tested on my x86_64/Cezanne laptop, no obvious regressions over about a day's use.