drm/amdgpu: Fix incorrect return value in sysfs for pp_od_clk_voltage
Subsystems (2)
PATCH 1/1 drm/amdgpu: Fix incorrect return value in sysfs for pp_od_clk_voltage
The changes in edad8312cbbf9a33c86873fc4093664f150dd5c1 introduced an issue with the sysfs interface for pp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.
With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5 -1
@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end:up_read (&adev->reset_sem); -return ret; +if (ret) { +return ret; + }else { +return count; + } } static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
Signature · 6 lines
2.28.0 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only - Internal Distribution Only]
Hi, Matt,
With your change, I still could reproduce the following issue:
# echo "s 1 1900" > /sys/class/drm/card0/device/pp_od_clk_voltage bash: echo: write error: Invalid argument
I found that it is related the following lines code, could you help double check it?
while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) { // sub_str will be empty string
ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
if (ret)
return -EINVAL; // return here
parameter_size++;
while (isspace(*tmp_str))
tmp_str++;
}Best Regards
Dennis Li
-----Original Message-----
From: Matt Coffin <[email protected]>
Sent: Friday, August 14, 2020 9:15 AM
To: [email protected]
Cc: Koenig, Christian <[email protected]>; Li, Dennis <[email protected]>; Matt Coffin <[email protected]>
Subject: [PATCH] drm/amdgpu: Fix incorrect return value in sysfs for pp_od_clk_voltage
The changes in edad8312cbbf9a33c86873fc4093664f150dd5c1 introduced an issue with the sysfs interface for pp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.
With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5 -1
@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end:up_read (&adev->reset_sem); -return ret; +if (ret) { +return ret; + }else { +return count; + } } static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
--
2.28.0
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Hey Dennis,
Thanks for the testing.
I'm having some issues reproducing, as that command is working fine for me in sh, bash, and zsh. So just to confirm a few things while I look at it...
1. What kind of SMU is on whatever card you're testing on? Looks like smu_v11+ to me?
2. (shouldn't matter if you're right about which -EINVAL return is being hit), but is OverDrive enabled?
3. Is this based off of latest amd-staging-drm-next?
This is the code block I'm seeing on the HEAD of alex's branch... which is a bit different from what you pasted.
This error also happens **before** the infinite loop I was fixing with this patch, but might as well get both birds with one stone if there's still an issue.
while (tmp_str[0]) {
sub_str = strsep(&tmp_str, delimiter);
ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
if (ret)
return -EINVAL;
parameter_size++;
while (isspace(*tmp_str))
tmp_str++;}
Quoted 60 lines · Dennis
[AMD Official Use Only - Internal Distribution Only]
Hi, Matt,
With your change, I still could reproduce the following issue:# echo "s 1 1900" > /sys/class/drm/card0/device/pp_od_clk_voltage bash: echo: write error: Invalid argumentI found that it is related the following lines code, could you help double check it? while ((sub_str = strsep(&tmp_str, delimiter)) != NULL) { // sub_str will be empty string ret = kstrtol(sub_str, 0, ¶meter[parameter_size]); if (ret) return -EINVAL; // return here parameter_size++; while (isspace(*tmp_str)) tmp_str++; }Best Regards
Dennis Li
-----Original Message-----
From: Matt Coffin <[email protected]>
Sent: Friday, August 14, 2020 9:15 AM
To: [email protected]
Cc: Koenig, Christian <[email protected]>; Li, Dennis <[email protected]>; Matt Coffin <[email protected]>
Subject: [PATCH] drm/amdgpu: Fix incorrect return value in sysfs forpp_od_clk_voltageThe changes in
edad8312cbbf9a33c86873fc4093664f150dd5c1introduced an issue with the sysfs interface forpp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
Fixes edad8312cbbf ("drm/amdgpu: fix system hang issue during GPU")Signed-off-by Matt Coffin <[email protected]>--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5
-2@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end:up_read (&adev->reset_sem); -return ret; +if (ret) { +return ret; + }else { +return count; + } } static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev, --
Quoted 2 lines
2.28.0
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
[AMD Official Use Only - Internal Distribution Only]
Thanks for catching this. The patch is reviewed-by: Evan Quan <[email protected]> I have the same copy as Matt. @Li, Dennis maybe you were working on an old copy?
BR
Evan
-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Matt Coffin
Sent: Friday, August 14, 2020 11:14 AM
To: Li, Dennis <[email protected]>; [email protected]
Cc: Koenig, Christian <[email protected]>
Subject: Re: [PATCH] drm/amdgpu: Fix incorrect return value in sysfs for pp_od_clk_voltage
Hey Dennis,
Thanks for the testing.
I'm having some issues reproducing, as that command is working fine for me in sh, bash, and zsh. So just to confirm a few things while I look at it...
1. What kind of SMU is on whatever card you're testing on? Looks like smu_v11+ to me?
2. (shouldn't matter if you're right about which -EINVAL return is being hit), but is OverDrive enabled?
3. Is this based off of latest amd-staging-drm-next?
This is the code block I'm seeing on the HEAD of alex's branch... which is a bit different from what you pasted.
This error also happens **before** the infinite loop I was fixing with this patch, but might as well get both birds with one stone if there's still an issue.
while (tmp_str[0]) {
sub_str = strsep(&tmp_str, delimiter);
ret = kstrtol(sub_str, 0, ¶meter[parameter_size]);
if (ret)
return -EINVAL;
parameter_size++;
while (isspace(*tmp_str))
tmp_str++;}
Quoted 67 lines · Dennis
[AMD Official Use Only - Internal Distribution Only]
Hi, Matt,
With your change, I still could reproduce the following issue:# echo "s 1 1900" > /sys/class/drm/card0/device/pp_od_clk_voltage bash: echo: write error: Invalid argumentI found that it is related the following lines code, could you help double check it?
while ((
sub_str=strsep(&tmp_str, delimiter)) != NULL) { //sub_strwill be empty string ret =kstrtol(sub_str, 0, ¶meter[parameter_size]);
if (ret)
return-EINVAL; // return here
parameter_size++;while (
isspace(*tmp_str))
tmp_str++;
}Best Regards
Dennis Li
-----Original Message-----
From: Matt Coffin <[email protected]>
Sent: Friday, August 14, 2020 9:15 AM
To: [email protected]
Cc: Koenig, Christian <[email protected]>; Li, Dennis <[email protected]>; Matt Coffin <[email protected]>
Subject: [PATCH] drm/amdgpu: Fix incorrect return value in sysfs forpp_od_clk_voltageThe changes in
edad8312cbbf9a33c86873fc4093664f150dd5c1introduced an issue with the sysfs interface forpp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
Fixes edad8312cbbf ("drm/amdgpu: fix system hang issue during GPU")Bug:
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgitl
ab.freedesktop.org%2Fdrm%2Famd%2F-%2Fissues%2F1245&data=02%7C01%7C evan.quan%40amd.com%7C08991e3858f144a4dd0908d840001324%7C3dd8961fe4884 e608e11a82d994e183d%7C0%7C0%7C637329716385273288&sdata=w%2FBlX8CpG 0TfTYd1InX8Z%2FMBrRbVu%2FT4zWehWKHClCE%3D&reserved=0Signed-off-by Matt Coffin <[email protected]>--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5
-1@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end: up_read(&adev->reset_sem); -return ret; +if (ret) { +return ret; +}else { +return count; +} }
Quoted 4 lines
static
ssize_tamdgpu_get_pp_od_clk_voltage(struct device *dev,
--
2.28.0
_______________________________________________
amd-gfx mailing list
[email protected]
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Cevan.quan%40amd.com%7C08991e3858f144a4dd0908d840001324%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637329716385273288&sdata=IbsPW7%2Fr2HXLxKK4%2FOb6fqFmZXtyivbTsP9ftd7P2Dw%3D&reserved=0
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Hi all,
As of 026acaeac2d205f22c0f682cc1c7b1a85b9ccd00 ("drm/amdgpu: revert "fix system hang issue during GPU reset""), this patch is no longer needed, and won't apply, because the badly-behaving code was removed; I'll withdraw this patch for now.
Sorry to those who wasted their time reviewing.
Cheers,
Matt
Quoted 27 lines · Matt Coffin
The changes in
edad8312cbbf9a33c86873fc4093664f150dd5c1introduced an issue with the sysfs interface forpp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
Fixes edad8312cbbf ("drm/amdgpu: fix system hang issue during GPU")Signed-off-by Matt Coffin <[email protected]>--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +0
-0@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, · line 947
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5
-1up_read (&adev->reset_sem); -return ret; +if (ret) { +return ret; + }else { +return count; + } } static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
Deucher, Alexander
maintainer[AMD Public Use]
No need to apologize, it was a good catch. Something to double check in the future if something similar ends up getting applied again.
Thanks!
Alex
________________________________
From: amd-gfx <[email protected]> on behalf of Matt Coffin <[email protected]>
Sent: Friday, August 14, 2020 3:13 PM
To: [email protected] <[email protected]>
Cc: Quan, Evan <[email protected]>; Koenig, Christian <[email protected]>; Li, Dennis <[email protected]>
Subject: Re: [PATCH] drm/amdgpu: Fix incorrect return value in sysfs for pp_od_clk_voltage
Hi all,
As of 026acaeac2d205f22c0f682cc1c7b1a85b9ccd00 ("drm/amdgpu: revert "fix system hang issue during GPU reset""), this patch is no longer needed, and won't apply, because the badly-behaving code was removed; I'll withdraw this patch for now.
Sorry to those who wasted their time reviewing.
Cheers,
Matt
Quoted 27 lines · Matt Coffin
The changes in
edad8312cbbf9a33c86873fc4093664f150dd5c1introduced an issue with the sysfs interface forpp_od_clk_voltage. It overwrites the return value to 0 when it calls another function, then returns 0. The intended behavior is that a positive return value indicates the number of bytes from the buffer that you processed in that call.With the 0 return value, clients would submit the same value to be written over and over again, resulting in an infinite loop.
This is resolved by returning the count of bytes read (in this case the whole message), when the desired return is 0 (success).
Fixes edad8312cbbf ("drm/amdgpu: fix system hang issue during GPU")Signed-off-by Matt Coffin <[email protected]>--- drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +0
-0@@ -937,7 +937,11 @@ static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, pro_end:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c static ssize_t amdgpu_set_pp_od_clk_voltage(struct device *dev, · line 947
Quoted 10 lines
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c +5
-1up_read (&adev->reset_sem); -return ret; +if (ret) { +return ret; + }else { +return count; + } } static ssize_t amdgpu_get_pp_od_clk_voltage(struct device *dev,
_______________________________________________
amd-gfx mailing list
[email protected]
https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7Calexander.deucher%40amd.com%7C3fb1fd9f95ad441a88a208d840862e80%7C3dd8961fe4884e608e11a82d994e183d%7C0%7C0%7C637330292979204288&sdata=GLWlbhgo0grFjcOh5ZAJWhXGxSm6Ufw8eDFDHZf95Uk%3D&reserved=0
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx