Skip to contentSkip to conversation

d-link dfe-530 tx (bug-report)

DISCUSSION ksa1 2 participants 2 messages Feb 5, 2001 – Feb 6, 2001

lore
Share & tools
lore

ksa1

author
#0 lore raw

hi!

..I installed Manfred's patch and the d-link-card was now able to reset after the tx-timeout-error. that means that the card was again reachable after the error. but the smb-transfer-connection-error still appeared. then I set "static int debug = 2;" in the patched via-rhine.c to get more debug-informations but from then on the card worked without errors!? I tested this several times and produced a lot of network traffic - but there was no more error-message!

..but I will do some more tests to get sure. ;-)

bye.

--
Kristof mailto:[email protected]

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/

#1 lore raw

I just installed Urban's most recent patch, and I still get much the same problems when I reboot from Windows. The main difference appears to be that there's a few seconds' pause during the via-rhine driver initialisation (presumably while it tries to find PHY devices), and there aren't quite so many "transmit timed out" messages in the system log after booting. They do still appear though, and the network is not accessible. This happens when I reboot from Windows, and when I subsequently soft-power the machine and turn it back on. If also happens if I soft-power the machine from Windows and switch on straight into Linux.

In short, the card still needs a hard power-off for Linux to get it working after Windows.

--------------------------------------------------------------

from:     Jonathan "Chromatix" Morton
mail:     [email protected]  (not for attachments)
big-mail: [email protected]
uni-mail: [email protected]

The key to knowledge is not to rely on people to teach you it.

Get VNC Server for Macintosh from http://www.chromatix.uklinux.net/vnc/

-----BEGIN GEEK CODE BLOCK-----
Version 3.12
GCS$/E/S dpu(!) s:- a20 C+++ UL++ P L+++ E W+ N- o? K? w--- O-- M++$ V? PS PE- Y+ PGP++ t- 5- X- R !tv b++ DI+++ D G e+ h+ r- y+
-----END GEEK CODE BLOCK-----

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/