phylib: use MDIO_DEVS[12]

The bare register numbers are used despite <uapi/linux/mdio.h> has MDIO_DEVS[12] #define'd for those.

Signed-off-by Sergei Shtylyov <[email protected]>

---
This patch is against DaveM's 'net-next.git' repo.

 drivers/net/phy/phy_device.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Index: net-next/drivers/net/phy/phy_device.c
===================================================================

drivers/net/phy/phy_device.c +2 -2

@@ -230,13 +230,13 @@ static int get_phy_c45_ids(struct mii_bu
        for (i = 1;
             i < num_ids && c45_ids->devices_in_package == 0;
             i++) {
-               reg_addr = MII_ADDR_C45 | i << 16 | 6;
+               reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS2;
                phy_reg = mdiobus_read(bus, addr, reg_addr);
                if (phy_reg < 0)
                        return -EIO;
                c45_ids->devices_in_package = (phy_reg & 0xffff) << 16;
 
-               reg_addr = MII_ADDR_C45 | i << 16 | 5;
+               reg_addr = MII_ADDR_C45 | i << 16 | MDIO_DEVS1;
                phy_reg = mdiobus_read(bus, addr, reg_addr);
                if (phy_reg < 0)
                        return -EIO;

The bare register numbers are used despite <uapi/linux/mdio.h> has MDIO_DEVS[12] #define'd for those.

Signed-off-by Sergei Shtylyov <[email protected]>