aic7xxx.c vs. Adaptec 29160N
I have a 29160N card in a PowerMac G4. It used to work fine with an old UW SCSI disk I had there. Today, I flipped this drive with a real Ultra160 one , and now, the kernel won't boot. It's giving me an endless stream of SCSI reset timeouts on bus 0.
Any clue ? I don't really need this disk in Linux (at least not yet), but I don't neither want to plug/unplug the disk each time I boot linux or MacOS...
The disk is a Quantum ATLAS_V__9_WLS rev. 0230
Anything I can do to help tracking the problem ? It's difficult to get the actual output of the driver in verbose mode as it is scrolling quite fast and I have nothing like a serial console on this box. The kernel won't boot without noprobe so I can't dump dmesg output.
Ben.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/
Quoted 4 lines
Anything I can do to help tracking the problem ? It's difficult to get the actual output of the driver in verbose mode as it is scrolling quite fast and I have nothing like a serial console on this box. The kernel won't boot without noprobe so I can't dump dmesg output.
I was wrong, even no_probe won't help, I have to physically disconnect the drive to get the kernel to boot.
Ben.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
Please read the FAQ at http://www.tux.org/lkml/