Kworld 315U remote support
PATCH 1/1 Kworld 315U remote support
This patch adds remote support for the Kworld 315U device
Note: I believe I got most of the mappings correct. Though the source and shutdown button probably could be mapped to something better.
To be done: Still need to get the Kworld analog patch resubmitted. There are still some stuff I want to test with the analog patch before I resubmit it. Hopefully this patch will work ok.
Please let me know if there are any issues applying the patch
linux/drivers/media/IR/ir-keymaps.c +49 -0
@@ -3501,3 +3501,52 @@ .size = ARRAY_SIZE(ir_codes_winfast_usbii_deluxe), };EXPORT_SYMBOL_GPL (ir_codes_winfast_usbii_deluxe_table); + +/* Kworld 315U +*/ +static struct ir_scancode ir_codes_kworld_315u[] = { + {0x43 ,KEY_POWER }, + {0x01 ,KEY_TUNER },/* source */ + {0x0b ,KEY_ZOOM }, + {0x03 ,KEY_POWER2 },/* shutdown */ + + {0x04 ,KEY_1 }, + {0x08 ,KEY_2 }, + {0x02 ,KEY_3 }, + {0x09 ,KEY_CHANNELUP }, + + {0x0f ,KEY_4 }, + {0x05 ,KEY_5 }, + {0x06 ,KEY_6 }, + {0x07 ,KEY_CHANNELDOWN }, + + {0x0c ,KEY_7 }, + {0x0d ,KEY_8 }, + {0x0a ,KEY_9 }, + {0x0e ,KEY_VOLUMEUP }, + + {0x10 ,KEY_LAST }, + {0x11 ,KEY_0 }, + {0x12 ,KEY_ENTER }, + {0x13 ,KEY_VOLUMEDOWN }, + + {0x14 ,KEY_RECORD }, + {0x15 ,KEY_STOP }, + {0x16 ,KEY_PLAY }, + {0x17 ,KEY_MUTE }, + + {0x18 ,KEY_UP }, + {0x19 ,KEY_DOWN }, + {0x1a ,KEY_LEFT }, + {0x1b ,KEY_RIGHT }, + + {0x1c ,KEY_RED }, + {0x1d ,KEY_GREEN }, + {0x1e ,KEY_YELLOW }, + {0x1f ,KEY_BLUE }, +}; +struct ir_scancode_table ir_codes_kworld_315u_table = { + .scan = ir_codes_kworld_315u, + .size =ARRAY_SIZE (ir_codes_kworld_315u), +}; +EXPORT_SYMBOL_GPL (ir_codes_kworld_315u_table);
linux/drivers/media/video/em28xx/em28xx-cards.c +1 -0
@@ -1322,6 +1322,7 @@ .tda9887_conf = TDA9887_PRESENT, .decoder = EM28XX_SAA711X, .has_dvb = 1, + .ir_codes = &ir_codes_kworld_315u_table, .dvb_gpio = em2882_kworld_315u_digital, .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE,
linux/include/media/ir-common.h +1 -0
@@ -163,4 +163,5 @@extern struct ir_scancode_table ir_codes_gadmei_rm008z_table;extern struct ir_scancode_table ir_codes_nec_terratec_cinergy_xs_table;extern struct ir_scancode_table ir_codes_winfast_usbii_deluxe_table; +extern struct ir_scancode_table ir_codes_kworld_315u_table;#endif
Quoted 11 lines · Franklin Meng
This patch adds remote support for the Kworld 315U device
Note: I believe I got most of the mappings correct. Though the source and shutdown button probably could be mapped to something better.
To be done: Still need to get the Kworld analog patch resubmitted. There are still some stuff I want to test with the analog patch before I resubmit it. Hopefully this patch will work ok.
Please let me know if there are any issues applying the patch
Hi Franklin,
Could you please add a table with the full scan code?
There are currently two examples of such tables:
ir_codes_rc5_hauppauge_new_table - for RC5 keycodes ir_codes_nec_terratec_cinergy_xs_table - for NEC keycodes
Basically, a full scan code has a 2-byte code instead of 1-byte, and you need to specify the protocol at the table, like:
struct ir_scancode_table ir_codes_nec_terratec_cinergy_xs_table = {
.scan = ir_codes_nec_terratec_cinergy_xs,
.size = ARRAY_SIZE(ir_codes_nec_terratec_cinergy_xs), .ir_type = IR_TYPE_NEC,
};
The em28xx is already prepared to properly handle the protocol.
the advantage of using a full table is that it is easy to replace the keytable and even the protocol if someone wants to use a different Remote Controller to control the device.
As you've declared this xclk:
.xclk = EM28XX_XCLK_FREQUENCY_12MHZ,
I suspect that your keycode is of the type NEC.
Cheers,
Mauro
Mauro,
I tried out the ir_type change to the code and when I set it to IR_TYPE_NEC, I see messages in the log indicating that the key was not recognized. Using IR_TYPE_OTHER seems to work ok.
My guess is that if I modify the keycodes IR_TYPE_NEC will work as well. Can I just use IR_TYPE_OTHER? That seems like the most straight forward approach with the least amount of changes.
Thanks,
Franklin Meng
Quoted 75 lines · Mauro Carvalho Chehab
From: Mauro Carvalho Chehab <[email protected]>
Subject: Re: [Patch] Kworld 315U remote support
To: "Franklin Meng" <[email protected]>
Cc: "Douglas Schilling" <[email protected]>, "maillist" <[email protected]>
Date: Monday, February 8, 2010, 5:13 AMQuoted 1 line · Franklin Meng
This patch adds remote support for the Kworld 315U
device
Quoted 2 lines
Note: I believe I got most of the mappings
correct. Though the
Quoted 1 line
source and shutdown button probably could be mapped to
something
Quoted 3 lines
better.
To be done: Still need to get the Kworld analog patch
resubmitted.
Quoted 1 line
There are still some stuff I want to test with the
analog patch before
Quoted 1 line
I resubmit it. Hopefully this patch will work
ok.
Quoted 2 lines
Please let me know if there are any issues applying
the patch
Hi Franklin,
Could you please add a table with the full scan code?
There are currently two examples of such tables:
ir_codes_rc5_hauppauge_new_table- for
RC5 keycodes
ir_codes_nec_terratec_cinergy_xs_table-
for NEC keycodesBasically, a full scan code has a 2-byte code instead of 1-byte,
and you need to specify the protocol at the table, like:struct
ir_scancode_tableir_codes_nec_terratec_cinergy_xs_table= {
.scan =ir_codes_nec_terratec_cinergy_xs,
.size =ARRAY_SIZE(ir_codes_nec_terratec_cinergy_xs),
.ir_type =IR_TYPE_NEC,
};The em28xx is already prepared to properly handle the protocol.
the advantage of using a full table is that it is easy to replace
the keytable and even the protocol if someone wants to use a different
Remote Controller to control the device.As you've declared this xclk:
.xclk =EM28XX_XCLK_FREQUENCY_12MHZ,I suspect that your keycode is of the type NEC.
Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 5 lines · Franklin Meng
Mauro,
I tried out the
ir_typechange to the code and when I set it toIR_TYPE_NEC, I see messages in the log indicating that the key was not recognized. UsingIR_TYPE_OTHERseems to work ok.My guess is that if I modify the keycodes
IR_TYPE_NECwill work as well.
If it is displaying a log, it means that the protocol is NEC. All you need is to add the 8 most significant bits to the table. In general, this code is common to all keystrokes.
For example, this is the legacy keymap table for Hauppauge IR:
static struct ir_scancode ir_codes_hauppauge_new[] = {
/* Keys 0 to 9 */
{ 0x00, KEY_0 },
{ 0x01, KEY_1 },
{ 0x02, KEY_2 },
{ 0x03, KEY_3 },
{ 0x04, KEY_4 },The new table is:
static struct ir_scancode ir_codes_rc5_hauppauge_new[] = {
/* Keys 0 to 9 */
{ 0x1e00, KEY_0 },
{ 0x1e01, KEY_1 },
{ 0x1e02, KEY_2 },
{ 0x1e03, KEY_3 },
{ 0x1e04, KEY_4 },You'll notice that the only difference is that the code now has "0x1e00" added to all keys, and that the new table has the protocol properly indicated.
Quoted 1 line
Can I just use
IR_TYPE_OTHER? That seems like the most straight forward approach with the least amount of changes.
The usage of IR_TYPE_OTHER disables some new API's that are shown to userspace, that allows the replacement of the IR for a better one.
Due to that, the usage of IR_TYPE_OTHER is deprecated.
We should really get rid of all those legacy keymaps that don't inform the IR protocol, not allowing that the key sequences and protocols to be properly seen on userspace and eventually replaced, if the user wants to buy a powerful remote and associate other keys to his IR.
So, please don't use IR_TYPE_OTHER.
Cheers,
Mauro